Achievements of DEMO Design

Achievements obtained in BA Phase II (from April 2020) and those obtained in BA Phase I (from June 2007 to March 2020) are separately shown hereafter. 

 from 2020

The DEMO Design Activities (DDA) are the BA contribution to the design effort towards future fusion reactors. In BA Phase II, the DDA activities will build on the results obtained in Phase I, taking into account the recommendations of the review of Phase I results where eight subjects were identified for further joint studies. DDA addresses the activities on 1) Plasma scenario, 2) Divertor and power exhaust, 3) Breeding blanket design, and tritium extraction and removal, 4) Remote maintenance, 5) Safety, 6) System code, 7) Superconducting magnets and 8) Balance of plant (BoP) and plant system. The first five items have high priority, and are directly relevant for ITER and JT-60SA exploitation so joint work is foreseen in these areas. In addition, on the last three items information will be exchanged to share the whole view of DEMO. The peer-reviewed papers corresponding to the activities in the eight arias mentioned above are presented below.

Publication List

Year IA Title Author DOI Journal
2023 EU Studies on EU-DEMO 3D coils requirements and conceptual design for error field correction and plasma control F Maviglia L. Pigatto, F. Villone, H. Zohm, C. Albert, P. Bruzzone, R. Buchholz, B. Drumm, J. Gerardin, Y.Q. Liu, C. Luongo, M. Porton, M. Siccinio, S. Wiesen https://doi.org/10.1016/j.fusengdes.2023.114010 Fusion Engineering and Design
2023 JA Unlimited Fusion-Energy Station Based on Lithium Recovery from Seawater for a Net-Zero Carbon World Ryoji Hiwatari, Youji Someya, Hiroyasu Utoh, Yoshiteru Sakamoto, and Joint Special Design Team for Fusion DEMO https://doi.org/10.1585/pfr.18.1205077 Plasma and Fusion Research
2023 EU Architecture design and internal implementation of a universal coupling between controllers and physics in a tokamak flight-simulator C Wu P.David, E.Fable, D.Frattolillo, L.diGrazia, M.Mattei, M.Siccinio, W.Treutterer, H.Zohm https://doi.org/10.1080/15361055.2023.2234741 Fusion Science and Technology
2023 EU Advancements in the design of the DEMO driver blanket system during the EU DEMO Pre-Conceptual Design Phase: Overview, Challenges and Opportunities F.A. Hernandez, P. Arena, L.V. Boccaccini, I. Cristescu, A. Del Nevo, P. Sardain, G.A. Spagnuolo, M. Utili, A. Venturini, G. Zhou https://doi.org/10.3390/jne4030037 Fusion Engineering and Design
2023 JA Integrated Modeling of Runaway Electron Beam Formation in JA DEMO Post-Disrutpion Plasmas Y. Yamamoto, A. Matsuyama, Y. Someya, W. Chen, S. Miyamoto, Y. Shibata https://doi.org/10.1585/pfr.18.1203064 Plasma and Fusion Research
2023 EU Water Chemistry Impact On Activated Corrosion Products Assessment In Tokamak Reactors M D'Onorio, M.Molinari, G.Mariano, N.Terranova, G.Caruso https://doi.org/10.3390/en16124726 Energies
2023 JA/EU Recent progress of plasma exhaust concepts and divertor designs for tokamak DEMO reactors N. Asakura, K. Hoshino, S. Kakudate, F. Subba, J.-H. You, S. Wiesen, T.D. Rognlien, R. Ding, S. Kwon https://doi.org/10.1016/j.nme.2023.101446 Nuclear Materials and Energy
2023 EU Impact of water ingress on oxidation and dust generation in beryllium plasma-facing components Y Zayachuk Y. Zayachuk, N. Catarino, C. Smith, I. Jepu, C. Ayres, A. Widdowson, E. Alves, M. Rubel, JET contributors https://doi.org/10.1016/j.nme.2023.101437 Nuclear Materials and Energy
2023 EU Thermal-hydraulic optimization of a proposed EU-DEMO hydrogen passive removal system M D'Onorio, T. Glingler, G. Caruso https://doi.org/10.1016/j.fusengdes.2023.113729 Fusion Engineering and Design
2023 EU Passive Hydrogen Recombination during a Beyond Design Basis Accident in a Fusion DEMO Plant M. D'Onorio, T. Glingler, G. Mazzini, M.T. Porfiri, G. Caruso https://doi.org/10.3390/en16062569 Energies
2023 EU Innovative tungsten coatings for an application in modern and future fusion devices T. Keller A. Litnovsky, G. Mauer, Ch. Linsmeier, O. Guillon and S. Korte-Kerzel https://doi.org/10.3390/met13030531 Metals
2023 EU Design of a test section for the experimental investigation of the WCLL manifold hydraulic features A Collaku Pietro Arena, Alessandro Del Nevo, Ranieri Marinari, Laura Savoldi https://doi.org/10.3390/en16052246 Energies
2023 EU Heat Pipe-based DEMO Divertor Target concept: high heat flux performance evaluation W. Wen, B-E Ghidersa, W. Hering, J. Starflingerb, R. Stieglitz https://doi.org/10.3390/jne4010021 Journal of Nuclear Engineering
2023 EU Magneto-convective flows around two differentially heated cylinders C. Mistrangelo, L. Buhler, H-J. Brinkmann, C. Courtessole,
V. Klüber, C. Koehly
https://doi.org/10.1007/s00231-023-03350-2 Heat and Mass Transfer
2023 EU Design and integration of the EU-DEMO Water-Cooled Lead Lithium Breeding Blanket P Arena G. Bongiovi, I. Catanzaro, C. Ciurluini, A. Collaku, A. Del Nevo, P.A. Di Maio, M. D’Onorio, F. Giannetti, V. Imbriani, P. Maccari, L. Melchiorri, F. Moro, R. Mozzillo, S. Noce, L. Savoldi, S. Siriano, A. Tassone, M. Utili https://doi.org/10.3390/en16042069 Energies
2023 EU Concept of contamination control door for DEMO and proof of principle design Y. Wang, J. Oellerich, C. Baars, M. Mittwollen, https://doi.org/10.3390/jne4010018 Journal of Nuclear Engineering
2023 EU Development of a thermal-hydraulic model for the EU-DEMO Tokamak building and LOCA simulation G Caruso M. D’Onorio, T. Glingler, M.T. Porfiri, D.N. Dongiovanni, S.Ciattaglia, C. Gliss, J. Elbez, P. Cortes https://doi.org/10.3390/en16031149 Energies
2023 EU Performance Analysis of Hybrid Kinematic Mechanism for Fusion Reactor Maintenance G. Qin, H.Wu, C.Li, A.Ji, B.Stuart https://doi.org/10.3390/app13031740 Applied Sciences
2022 EU Development of Mechanical Pipe-Connection Design for DEMO V.Milushev, A Azka, M.Mittwollen https://doi.org/10.3390/jne4010008 Journal of Nuclear Engineering
2022 JA Parameter study of L-H transition for plasma operation scenario development in JA DEMO S. Sugiyama, N. Aiba, N. Asakura, N. Hayashi, Y. Sakamoto https://doi.org/10.1016/j.fusengdes.2022.113369 Fusion Engineering and Design
2022 EU DEMO Divertor Cassette and Plasma Facing Unit in Vessel Loss of Coolant Accident single and multiple failure cases comparison D.N.Dongiovanni, M.D’Onorio, G.Caruso, T.Pinna, M.T. Porfiri https://doi.org/10.3390/en15238879 Energies
2022 EU Review of magnetic islands from the divertor perspective and a simplified heat transport model for the island divertor Y. Feng, and W7-X-team https://doi.org/10.1088/1361-6587/ac9ed9 Plasma Physics and Controlled Fusion
2022 JA Hydrogen permeation behavior through tungsten deposition layer H. Ito, K. Katayama, D. Mori, Y. Hara and M. Oya https://doi.org/10.1016/j.fusengdes.2020.112083 Fusion Engineering and Design
2022 EU Preliminary thermal optimization and investigation of the overall structural behaviour of the EU-DEMO Water-Cooled Lead Lithium Left Outboard Blanket segment I.Catanzaro, G.Bongiovi, P.A.Di Maio, P.Arena https://doi.org/10.1016/j.fusengdes.2022.113294 Fusion Engineering and Design
2022 EU Preliminary assessment of tritium permeation and retention in the European Water Cooled Lithium Lead Test Blanket Module with TESSIM-h R. Arredondo, K. Schmid, I. Ricapito, A. Lukenskas, G.A. Spagnuolo https://doi.org/10.1016/j.nme.2022.101228 Nuclear Materials and Energy
2022 EU Shielding design optimization of the Helium Cooled Pebble Bed breeding blanket for the EU DEMO fusion reactor I. PALERMO, F.A.Hernández, P.Pereslavtsev, D.Rapisarda, G.Zhou https://doi.org/10.3390/en15155734 Energies
2022 EU Operational Tritium Inventories in the EU-DEMO Fuel Cycle J. C. Schwenzer, C. Day, T. Giegerich, A. Santucci https://doi.org/10.1080/15361055.2022.2101834 Fusion Science and Technology
2022 JA Development of Poloidal Horseshoe Limiter Concept for JA DEMO W. Chen, Y. Someya, M. Arikawa, H. Utoh, R. Hiwatari, N. Umeda, S. Kakudate, Y. Sakamoto, Joint Special Design Team for Fusion DEMO https://doi.org/10.1109/TPS.2022.3176443 IEEE Transaction on Plasma Science
2022 EU The role of grain boundaries and denuded zones for tritium retention in high-dose neutron irradiated beryllium Nikolai Zimber, P. Vladimirov https://doi.org/10.1016/j.jnucmat.2022.153855 Journal of Nuclear Materials
2022 EU Progress in additive manufacturing of pure tungsten for plasma-facing component applications A. von Mueller, D.Dorow-Gerspach, M.Balden, M.Binder, B.Buschmann, B.Curzadd, T.Loewenhoff, R.Neu, G.Schlick, J.H.You https://doi.org/10.1016/j.jnucmat.2022.153760 Journal of Nuclear Materials
2022 JA Development and Application of SONIC Divertor Simulation Code to Power Exhaust Design of Japanese DEMO Divertor Nobuyuki Asakura , Kazuo Hoshino, Yuki Homma, Yoshiteru Sakamoto
and Joint Special Design Team for Fusion DEMO
https://doi.org/10.3390/pr10050872 Processes
2022 JA Permeation behavior of gaseous tritium through the assembly composed of Zr and Al2O3 simulating Li rod H. Isogawa, K. Kazunari, D. Henzan, H. Matsuura https://doi.org/10.1016/j.nme.2022.101170 Nuclear Materials and Energy
2022 EU A Combined Electromagnetic and Mechanical Approach for EU-DEMO Toroidal Field Coils L.Giannini, D.P. Boso, V.Corato https://doi.org/10.3390/app12062766 Applied Sciences
2022 EU A model to simulate gas dissolution into/through metals and its application to deuterium in a 316L steel chamber with Pb-Li in a quasi-2D geometry T. Pomella Lobo et al. https://doi.org/10.3390/app12052523 Applied Sciences
2022 EU Structural assessment of the European DEMO Water-Cooled Lithium Lead breeding blanket central outboard segment under remote maintenance loading conditions Bongiovi, P. A. Di Maio https://doi.org/10.11648/j.ns.20220701.11 Nuclear Science
2021 JA Effect of nuclear heat caused by the 6Li(n,α)T reaction on tritium containment performance of tritium production module in High-Temperature Gas-Cooled reactor for fusion reactors Yuki Koga, Hideaki Matsuura, Kazunari Katayama, Teppei Otsuka, Minoru Goto, Shimpei Hamamoto, Etsuo Ishitsuka, Shigeaki Nakagawa, Kenji Tobita, Satoshi Konishi, Ryoji Hiwatari, Youji Someya, Yoshiteru Sakamoto https://doi.org/10.1016/j.nucengdes.2021.111584 Nuclear Engineering and Design
2021 EU/JA Power exhaust concepts and divertor designs for Japanese and European DEMO fusion reactors N. Asakura, K. Hoshino, S. Kakudate, F. Subba, C. Vorpahl, Y. Homma, H. Utoh, Y. Someya, Y. Sakamoto, R. Hiwatari, S. Suzuki, M. Siccinio, G. Federici, J.-H. You https://doi.org/10.1088/1741-4326/ac2ff4 Nuclear Fusion
2021 EU Single and double null equilibria in the SMART Tokamak S J Diyle, A Mancini, M Agredano-Torres, J L Garcia-Sanchez, J Segado-Fernandez, J Ayllon-Guerola, M Garcia-Munoz, E Viezzer, J Garcia-Lopez, Y S Hwang https://doi.org/10.1088/2516-1067/ac2a0e Plasma Research Express
2021 EU Preliminary assessment of cooling water chemistry for fusion power plants E.N. Piccolo, R. Torella, N. Terranova et al. https://doi.org/10.3390/cmd2030027 Corrosion and Materials Degradation
2021 JA Modeling of hydrogen permeation behavior through tungsten deposition layer growing on nickel substrate by hydrogen plasma sputtering Y. Hara, K. Katayama and M. Oya https://doi.org/10.1016/j.fusengdes.2021.112851 Fusion Engineering and Design
2021 EU Multiphysics Optimization for First Wall Design Enhancement in Water-Cooled Breeding Blankets R Forte et al. https://doi.org/10.1016/j.nme.2021.101058 Nuclear Materials and Energy
2021 EU An object kinetic Monte Carlo method to model precipitation and segregation in alloys under irradiation J. P. Balbuena, L. Malerba, N. Castin, G. Bonny, MJ. Caturla https://doi.org/10.1016/j.jnucmat.2021.153236 Journal of Nuclear Materials
2021 EU Exploratory tritium breeding performance study on a Water cooled Lead Ceramic Breeder blanket for EU DEMO using Serpent-2 Y. Lu, M. Ye, G Zhou et al. https://doi.org/10.1016/j.nme.2021.101050 Nuclear Materials and Energy
2021 JA Pulse Shape Dependence of Vapor Shielding Efficiencies During Transient Heat Loads Kenzo IBANO, Yoshio UEDA, Tomonori TAKIZUKA https://doi.org/10.1585/pfr.16.1405092 Plasma and Fusion Research
2021 JA A study on ohmic plasma initiation for JA DEMO S. Sugiyama, K. Shinya, H. Utoh, N. Aiba, Y. Sakamoto https://doi.org/10.1016/j.fusengdes.2021.112779 Fusion Engineering and Design
2021 JA Thermal treatment of W large-scale fiberform nanostructures S.Kajita, T.Okuyama, H.Tanaka, T. Kuwabara, N.Ohno and N.Yoshida https://doi.org/10.1088/1402-4896/ac0866 Physica Scripta
2021 EU Temperature Effect on Irradiation Damage in Equiatomic Multi-component Alloys E. Levo, F. Granberg, K. Nordlund, F. Djurabekova https://doi.org/10.1016/j.commatsci.2021.110571 Computational Materials Science
2021 JA Overview of recent progress on steady state operation of all-metal plasma facing wall device QUEST K. Hanada, N. Yoshida, M. Hasegawa, M. Oya, Y. Oya, I. Takagi, A. Hatayama, T. Shikama, H. Idei, Y. Nagashima, R. Ikezoe, T. Onchi, K. Kuroda, S. Kawasaki, A. Higashijima, T. Nagata, S. Shimabukuro, K. Nakamura, S. Murakami, Y. Takase, X. Gao, H. Liu, and J. Qian https://doi.org/10.1016/j.nme.2021.101013 Nuclear Materials and Energy
2021 EU The SparSpec algorithm and the application to the detection of spatial periodicities in tokamaks: error weighting the penalization criterion to improve the performance of the algorithm DS. Testa, H.Carfantan, L.M.Perrone https://doi.org/10.1088/2516-1067/abf946 Plasma Research Express
2021 EU The SparSpec algorithm and the application to the detection of spatial periodicities in tokamaks: using memory with relaxation DS. Testa, H.Carfantan, L.M.Perrone https://doi.org/10.1088/2516-1067/abf947 Plasma Research Express
2021 JA Effect of temperature distribution on tritium permeation rate to cooling water in JA DEMO condition K. Katayama, Y. Someya, T. Chikada, K. Tobita, H. Nakamura, Y. Hatano, R. Hiwatari, Y. Sakamoto, A. Ipponsugi, M. Oya https://doi.org/10.1016/j.fusengdes.2021.112576 Fusion Engineering and Design
2021 EU Feasibility of D-D start-up under realistic technological assumptions for EU-DEMO M Siccinio et al. https://doi.org/10.1016/j.fusengdes.2021.112554 Fusion Engineering and Design
2021 EU Development of a component-level hydrogen transport model with OpenFOAM and application to tritium transport inside a DEMO HCPB breeder V Pasler et al. https://doi.org/10.3390/app11083481 Applied Sciences
2021 JA Observation of surface deformation of tungsten exposed to single pulsed high heat flux and magnetic field for divertor design Takifumi Okita,Yuki Matsuda,Sho Saito,Eiji Hoashi,Kenzo Ibano,Yoshio Ueda https://doi.org/10.1016/j.fusengdes.2021.112547 Fusion Engineering and Design
2021 EU RAMI analyses for the primary heat transfer systems of breeding blankets and the related Balance of Plant of DEMO reactor T Pinna, https://doi.org/10.1016/j.fusengdes.2021.112505 Fusion Engineering and Design
2021 JA Deuterium retention in tungsten irradiated by high-dose neutrons at high temperature M. Oya, M. Shimada, C.N. Taylor, M.I. Kobayashi, Y. Nobuta, Y. Yamauchi, Y. Oya, Y. Ueda, Y. Hatano https://doi.org/10.1016/j.nme.2021.100980 Nuclear Materials and Energy
2021 EU Pre-conceptual design of EU DEMO balance of plant systems: objectives and challenges L. Barucca, E.Bubelis, S.Ciattaglia, A.D’Alessandro, A.Del Nevo, F.Giannetti, W.Hering, P.Lorusso, E.Martelli, I.Moscato, A.Quartararo, A.Tarallo, E.Vallone https://doi.org/10.1016/j.fusengdes.2021.112504 Fusion Engineering and Design
2021 EU Matter injection in EU-DEMO: the pre-conceptual design B Ploeckl et al. https://doi.org/10.1080/15361055.2021.1903784 Fusion Science and Technology
2021 EU Predictors of public attitudes towards fusion energy in Europe C. Jones, C. Oltra, A, Prades https://doi.org/10.1016/j.erss.2021.102028 Energy Research & Social Science
2021 EU Study of the EU-DEMO WCLL breeding blanket primary cooling circuits thermal-hydraulic performances during transients belonging to LOFA category C. Ciurluini et al. https://doi.org/10.3390/en14061541 Energies
2021 EU Operation of large RF driven negative ion sources for fusion at pressures below 0.3 Pa D. Wuenderlich, R. Riedl, M. Fröschle, U. Fantz, B. Heinemann https://doi.org/10.3390/plasma4010010 Plasma
2021 JA The T-containment properties of a Zr-containing Li rod in a high-temperature gas-cooled reactor as a T production device for fusion reactors H. Matsuura, T. Suganuma, Y. Koga, M. Naoi, K. Katayama, T. Otsuka, M. Goto, S. Nakagawa, S. Hamamoto, E. Ishitsuka, K. Tobita, S. Konishi, R. Hiwatari, Y. Someya, Y. Sakamoto https://doi.org/10.1016/j.fusengdes.2021.112441 Fusion Engineering and Design
2021 EU Neutronics analysis and activation calculation for tungsten used in the DEMO divertor targets: A comparative study between the effects of WCLL and HCPB blanket, different W compositions and chromium S Noce, D.Flammini, G.Mariano, G.Mazzone, F.Moro, F.Romanelli, R.Villari, J.You https://doi.org/10.1016/j.fusengdes.2021.112428 Fusion Engineering and Design
2021 EU DEMO Single Null Inner Mid-plane Limiter RM feasibility study E Flynn, P. Cooper, O. Crofts, A. Loving, Z. Vizvary, A. Wilde https://doi.org/10.1016/j.fusengdes.2021.112419 Fusion Engineering and Design
2021 EU A Water cooled Lead Ceramic Breeder blanket for European DEMO G Zhou, Y. Lu, F. Hernandez https://doi.org/10.1016/j.fusengdes.2021.112397 Fusion Engineering and Design
2021 EU Progress on the Upgrade of the EDIPO, a 15 T Large Aperture Dipole D. Martins Araujo, et. al. https://doi.org/10.1109/TASC.2021.3061044 IEEE Transactions on Applied Superconductivity
2021 EU Conceptual design of a collimated neutron flux monitor and spectrometer for DTT M. Cecconello, S. Conroy , G. Ericsson, J. Eriksson , A. Hjalmarsson , A. Sperduti , I. Casiraghi, P. Mantica , T. Bolzonella, P. Agostinetti , R. Villari https://doi.org/10.1016/j.fusengdes.2021.112382 Fusion Engineering and Design
2021 EU Alternative PF Coil Winding Pack Design for the EU DEMO M. Kumar, R. Guarino1, X. Sarasola, K. Sedlak, P. Bruzzone https://doi.org/10.1109/TASC.2021.3059987 IEEE Transactions on Applied Superconductivity
2021 EU Hydraulic assessment of an upgraded pipework arrangement for the DEMO divertor plasma facing components cooling circuit P. A. Di Maio, R. Burlon, G. Mazzone, A. Quartararo, E. Vallone, J. H. You https://doi.org/10.1016/j.fusengdes.2021.112368 Fusion Engineering and Design
2021 EU Advances in additive manufacturing of fusion materials H Neuberger, Francisco Hernandez, Sebastian Ruck, Frederik Arbeiter, Simon Bonk, Michael Rieth, Ludek Stratil ,Oliver Müller, Kai-Uwe Volker https://doi.org/10.1016/j.fusengdes.2021.112309 Fusion Engineering and Design
2021 JA Simulation of Experimental Deuterium Retention in Tungsten under Periodic Deuterium Plasma Irradiation M. Oya, Y. Hara, K. Katayama, K. Ohya https://doi.org/10.1585/pfr.16.2405057 Plasma and Fusion Research
2021 EU The EU Strategy for solving the DEMO Exhaust Problem H. Zohm, F.Militello, T.W.Morgan, A.W.Morris, H.Reimerdes, M.Siccinio https://doi.org/10.1016/j.fusengdes.2021.112307 Fusion Engineering and Design
2021 EU Electromagnetic analysis activities in support of the Breeding Blanket during the DEMO Pre-Conceptual Design Phase: methodology and main results I.A. Maione, M. Roccella, F. Lucca, F. Villone, F. Hernandez, A. Del Nevo, C. Bachmann https://doi.org/10.1016/j.fusengdes.2021.112285 Fusion Engineering and Design
2021 EU Long-Pulse Diagnostic Calorimeter for the Negative Ion Source Testbed BATMAN Upgrade R. Nocentini, F. Bonomo, B. Heinemann, A. Hurlbatt, I. Mario https://doi.org/10.1063/5.0022465 Review of Scientific Instruments
2021 EU Shunt and Rogowski measurements on ASDEX Upgrade in support of DEMO detachment control L. Giannone, S.El Shawish, A.Herrmann, A.Kallenbach, K.H.Schuhbeck, G.Vayakis, C.Watts, I. Zammuto, ASDEX Upgrade team https://doi.org/10.1016/j.fusengdes.2021.112276 Fusion Engineering and Design
2021 EU Techno-economic and environmental characterization of industrial technologies for transparent bottom-up energy modeling D. Lerede, C. Bustreo, F. Gracceva, M. Saccone, L. Savoldi https://doi.org/10.1016/j.rser.2021.110742 Renewable and sustainable energy reviews
2021 EU CFD analysis of natural convection cooling of the in-vessel components during a shutdown of the EU DEMO fusion reactor A. Zappatore, A. Froio, G. A. Spagnuolo, R. Zanino https://doi.org/10.1016/j.fusengdes.2021.112252 Fusion Engineering and Design
2021 EU Thermal-hydraulic study of the DEMO divertor cassette body cooling circuit equipped with a liner and two reflector plates P. A. Di Maio, G. Mazzone, A. Quartararo, E. Vallone, J. H. You https://doi.org/10.1016/j.fusengdes.2021.112227 Fusion Engineering and Design
2020 EU Impact of plasma-wall interaction and exhaust on the EU-DEMO design F. Maviglia, M. Siccinio, C. Bachmann, W. Biel, M. Cavedon, E. Fable, G. Federici, M. Firdaouss, J. Gerardin, V. Hauer, I. Ivanova-Stanik, F. Janky, R. Kembleton, F. Militello, F. Subba, S. Varoutis, C. Vorpahl https://doi.org/10.1016/j.nme.2020.100897 Nuclear Materials and Energy
2020 EU Analysis of the thermal-hydraulic behavior of the EU-DEMO WCLL Breeding Blanket systems during a Loss Of Flow Accident C Ciurluini, F.Giannetti, E.Martelli, A. Del Nevo, G.Caruso https://doi.org/10.1016/j.fusengdes.2020.112206 Fusion Engineering and Design
2020 JA Study on pulse shape dependence of tungsten mass erosion under disruption-like heat load D. Motoi, K. Ibano, Y. Kikuchi, S. Saito, T. Okita, E. Hoashi, H. Lee, Y. Ueda https://doi.org/10.1016/j.fusengdes.2020.112209 Fusion Engineering and Design
2020 EU Numerical investigation of the tritium permeation phenomenon through cooling plates in breeding blankets F. Roca Urgorri, C. Moreno, D. Rapisarda https://doi.org/10.1088/1741-4326/abd194 Nuclear Fusion
2020 JA Tungsten Large-Scale Fiberform Nanostructures Retained under High Temperature Conditions T. Okuyama, S.Kajita, N.Yoshida, H.Tanaka, T.Kuwabara, N.Ohno https://doi.org/10.1585/pfr.16.1206001 Plasma and Fusion Research
2020 EU Dynamic model for an ensemble of interacting irradiation-induced defects in a macroscopic sample F. Baraglia, PW Ma https://doi.org/10.1088/1361-651X/abd014 Modelling and Simulation in Materials Science and Engineering
2020 JA Simulation studies of the divertor detachment and critical power exhaust parameters for Japanese DEMO design N. Asakura, K. Hoshino, Y. Homma, and Joint Special Design Team for Fusion Demo https://doi.org/10.1016/j.nme.2020.100864 Nuclear Materials and Energy
2020 EU Injection of high-speed solid D2 pellets using a “Direct-Line-of-Sight” (DLS) guide tube A. Frattolillo, L.R. Baylor, C. Day, T.E. Gebhart, P.T. Lang, S.J. Meitner, S. Migliori, B. Ploeckl, F. Poggi https://doi.org/10.1016/j.fusengdes.2020.112138 Fusion Engineering and Design
2020 JA Evaluation of hydrogen retention behavior in tungsten exposed to hydrogen plasma in QUEST A. Koike, M. Nakata, S. Yamazaki, T. Wada, F. Sun, M. Zhao, N. Yoshida, K. Hanada, Y. Oya https://doi.org/10.1016/j.nme.2020.100856 Nuclear Materials and Energy
2020 EU Preliminary thermal-hydraulic analysis of the EU-DEMO Helium-Cooled Pebble Bed fusion reactor by using the RELAP5-3D system code Salvatore D’Amico, Pietro Alessandro Di Maio, Xue Zhou Jin, Francisco Alberto Hernández Gonzalez, Ivo Moscato, Guangming Zhou https://doi.org/10.1016/j.fusengdes.2020.112111 Fusion Engineering and Design
2020 EU High-heat-flux technologies for the European demo divertor targets: State-of-the-art and a review of the latest testing campaign J.H. You, E. Visca, T. Barrett, B. Böswirth, F. Crescenzi, F. Domptail, G. Dose, M. Fursdon, F. Gallay, H. Greuner, K. Hunger, A. Lukenskas, A. v. Müller, M. Richou, S. Roccella, C. Vorpahl, K. Zhang https://doi.org/10.1016/j.jnucmat.2020.152670 Journal of Nuclear Materials
2020 EU Experimental Classification and Enhanced Suppression of Parasitic Oscillations in Gyrotron Beam Tunnels Z. C.. Ioannidis, I. Chelis, G. Gantenbein, T. Rzesnicki, J. Jelonnek https://doi.org/10.1109/TED.2020.3025751 IEEE Transactions on Electron Devices
2020 JA Effects of Helium Seeding on Deuterium Retention in Neutron-Irradiated Tungsten Y.Nobuta, M.Shimada, C.N.Taylor, Y.Oya, Y.Hatano, Y.Wu and M.Dubey https://doi.org/10.1080/15361055.2020.1843314 Fusion Science and Technology
2020 JA Tungsten fuzz: Deposition effects and influence to fusion devices S. Kajita, N. Yoshida and N. Ohno https://doi.org/10.1016/j.nme.2020.100828 Nuclear Materials and Energy
2020 EU Targeting a Versatile Actuator for EU-DEMO: Xenon Doping of Fuelling Pellets PT. Lang, B. Ploeckl, M. Bernert, A. Bock, R. Dux, A. Kallenbach, V. Rohde, M. Siccinio, W. Suttrop, A. Zito, AUG Team https://doi.org/10.1080/15361055.2020.1842713 Fusion Science and Technology
2020 EU Effect of irradiation on the stability of the corrosion layer produced in EUROFER by contact with lithium ceramics T. Hernandez, F. J. Sánchez, A. Moroño, M. Aristu, J.F. Marco https://doi.org/10.1016/j.jnucmat.2020.152614 Journal of Nuclear Materials
2020 EU Shunt Analysis in the Isolated-Target Divertor Model for Plasma Detachment Measurement in DEMO S. El Shawish, L. Giannone https://doi.org/10.1016/j.fusengdes.2020.112058 Fusion Engineering and Design
2020 EU Development and characterization of advanced neutron multiplier materials P. Vladimirov, V. P. Chakin, M. Dürrschnabel, R. Gaisin, A. Goraieb, F. A. Hernandez Gonzalez, M. Klimenkov, R. Rolli, N. Zimber, S. Udartsev, M. Kolmakov, A. Vechkutov, E. Frants https://doi.org/10.1016/j.jnucmat.2020.152593 Journal of Nuclear Materials
2020 EU Physics and Technology Considerations for the Deuterium–Tritium Fuel Cycle and Conditions for Tritium Fuel Self Sufficiency M. Abdou, M Riva, A Ying, C Day, A Loarte, L Baylor, P Humrickhouse, T F Fuerst, S Cho https://doi.org/10.1088/1741-4326/abbf35 Nuclear Fusion
2020 EU Tailored tungsten lattice structures for plasma-facing components in magnetic confinement fusion devices A. von Mueller, M.Binder, G.Calabro, R.De Luca, P.Fanelli, R.Neu, G.Schlick, F.Vivio, J.H.You https://doi.org/10.1016/j.mattod.2020.08.015 Materials Today
2020 EU Quench Analysis of the DEMO CS1 Coil A. Dembkowska, M. Lewandowska, X. Sarasola, K. Sedlak https://doi.org/10.1016/j.cryogenics.2020.103194 Cryogenics
2020 EU Effect of a low pressure low temperature hydrogen plasma on the work function of europium S. Cristofaro, R. Friedl, U. Fantz https://doi.org/10.1116/6.0000461 Journal of Vacuum Science and Technology A
2020 EU Cost-benefit analysis of Condition Monitoring on DEMO Remote Maintenance System N.. Petkov, H. Wu, R. Powell. https://doi.org/10.1016/j.fusengdes.2020.112022 Fusion Engineering and Design
2020 EU Deterministic and Stochastic modeling of rarefied gas flows in fusion particle exhaust systems CT. Tantos, S.Varoutis, C.Day https://doi.org/10.1116/6.0000491 Journal of Vacuum Science & Technology B
2020 JA Empirical Formulas for Estimating Self and Mutual Inductances of Toroidal Field Coils and Structures Y. Itoh, H. Utoh, Y. Sakamoto, R. Hiwatari, and Joint Special Design Team for Fusion DEMO https://doi.org/10.1585/pfr.15.1405078 Plasma and Fusion Research
2020 EU Analysis of the performances of a fusion reactor in a reduced H-mode confinement V. Pericoli Ridolfini, I. Ivanova-Stanik, M. Poradzinski, M. Siccinio, R. Zagórski https://doi.org/10.1088/1741-4326/abb79d Nuclear Fusion
2020 EU Direct measurements of electronic ground state ro-vibrationally excited D2 molecules produced on ECR plasma-facing materials by means of VUV-FT absorption spectroscopy S. Bechu, J.L.Lemaire, L.Gavilan, S.Aleiferis, N.Sadeghi, V.A.Shakhatov, Yu.A.Lebedev, D.Fombaron, L.Bonny, J.Menu, A.Bes, P.Svarnas, N.deOliveira https://doi.org/10.1016/j.jqsrt.2020.107325 Journal of Quantitative Spectroscopy and Radiative Transfer
2020 EU Thermomechanical characterization of W-Eurofer 97 brazed joints E. Tejado, J. de Prado, S. Tarancón, M. Sánchez, A. Martín, J.Y. Pastor, A. Ureña https://doi.org/10.1016/j.jnucmat.2020.152504 Journal of Nuclear Materials
2020 EU Origin of increased helium density inside bubbles in Ni_(1-x)Fe_(x) alloys F. Granberg, X. Wang, D. Chen, K. Jin, Y. Wang, H. Bei, W. J. Weber, Y. Zhang, K. L. More, K. Nordlund and F. Djurabekova https://doi.org/10.1016/j.scriptamat.2020.08.051 Scripta Materialia
2020 EU Discrete stochastic model of point defect-dislocation interaction for simulating dislocation climb C. McElfresh, Y. Cui, S. Dudarev, G. Po, J. Marian https://doi.org/10.1016/j.ijplas.2020.102848 International Journal of Plasticity
2020 EU Dynamic Modelling of the Helium-cooled DEMO Fusion Power Plant with an Auxiliary Boiler in Apros M Szogradi, S. Norrman, E. Bubelis https://doi.org/10.1016/j.fusengdes.2020.111970 Fusion Engineering and Design
2020 JA High-Speed Analysis of Heating and Current Drive with Neutral Beam Injection in Tokamak Plasma R. Funabashi, T. Fujita and A. Okamoto https://doi.org/10.1585/pfr.15.2401071 Plasma and Fusion Research
2020 EU Thermal-hydraulic analysis of the DEMO WCLL elementary cell: BZ tubes layout optimization F. Edemetti, I. Di Piazza, A. Del Nevo, G. Caruso https://doi.org/10.1016/j.fusengdes.2020.111956 Fusion Engineering and Design
2020 EU ExB electron drift current across the aperture of an ion source surrounded by a cusped magnetic field profile GF. Fubiani, J.P Boeuf, Y. Jiang https://doi.org/10.1063/5.0013639 Physics of Plasmas
2020 EU TFC-PREDIM: A FE dimensioning procedure for the TF coil system of a DEMO tokamak reactor I. Ivashov, W. Biel, P. Mertens https://doi.org/10.1016/j.fusengdes.2020.111948 Fusion Engineering and Design
2020 EU 3D transient CFD simulation of an in-vessel Loss-Of-Coolant Accident in the EU DEMO fusion reactor A. Zappatore, A. Froio, G. A. Spagnuolo, R. Zanino https://doi.org/10.1088/1741-4326/abac6b Nuclear Fusion
2020 EU Approach in improving reliability of DEMO Tonio Pinna, Danilo N. Dongiovanni https://doi.org/10.1016/j.fusengdes.2020.111937 Fusion Engineering and Design
2020 JA Estimation of Magnetic Error Field with Alleviating Fabrication Tolerance of Large Superconducting Magnets on JA DEMO reactor H. Utoh, G. Matsunaga, H. Togashi, R. Hiwatari, Y. Sakamoto, K. Tobita, and Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2020.111900 Fusion Engineering and Design
2020 EU Fusion energy: a deeper look into attitudes among the general public C. Turcanu, A. Prades, R.Sala, T. Perko, C, Oltra https://doi.org/10.1016/j.fusengdes.2020.111891 Fusion Engineering and Design
2020 EU Numerical investigation of hydrogen isotope retention by an yttrium pebble-bed from flowing liquid lithium S. J. Hendricks, E.Carella, C.Moreno, J.Molla https://doi.org/10.1088/1741-4326/aba672 Nuclear Fusion
2020 EU Analysis of the effects of electrification of the road transport sector on the possible penetration of nuclear fusion in the long-term European energy mix D. Lerede, C. Bustreo, F. Gracceva, Y. Lechón, L. Savoldi https://doi.org/10.3390/en13143634 Energies
2020 EU Peculiarities of the diffusion-controlled radiation defect accumulation kinetics under high fluencies V. Kuzovkov, E.A. Kotomin, A.I. Popov, R. Vila https://doi.org/10.1016/j.nimb.2020.07.023 Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
2020 EU Development Progress of Coating First Wall Components with Functionally Graded W/EUROFER Layers on Laboratory Scale T. Emmerich, D. Qu, B.-E. Ghidersa, M. Lux, J. Rey, R. Vaßen, J. Aktaa https://doi.org/10.1088/1741-4326/aba336 Nuclear Fusion
2020 JA Deuterium recombination coefficient on tungsten surface determined by plasma driven permeation M. Zhao, S. Yamazaki, T. Wada, A. Koike, F. Sun, N. Ashikawa, Y. Someya, T. Mieno, Y. Oya https://doi.org/10.1016/j.fusengdes.2020.111853 Fusion Engineering and Design
2020 JA Helium-W co-deposition layer: TEM observation and D retention S. Kajita, K. Asai, N. Ohno, H. Tanaka, N. Yoshida, D. Nagata and M. Yajima https://doi.org/10.1016/j.jnucmat.2020.152350 Journal of Nuclear Materials
2020 JA D retention and depth profile behavior for single crystal tungsten with high temperature neutron irradiation Y. Oya, F. Sun, Y. Yamauchi, Y. Nobuta, M. Shimada, C.N. Taylor, W.R. Wampler, M. Nakata, L.M. Garrison, Y. Hatano https://doi.org/10.1016/j.jnucmat.2020.152323 Journal of Nuclear Materials
2020 EU Thermal hydraulics activities for consolidating HCPB breeding blanket of the European DEMO G Zhou, Q. Kang, F. Hernandez et al. https://doi.org/10.1088/1741-4326/ab96f2 Nuclear Fusion
2020 EU Polish input to beam dynamic research for a superconductive linear accelerator in the Early Neutron Source project W. Grabowski, M.Staszczak, A.Wysocka-Rabin https://doi.org/10.5506/APhysPolBSupp.13.801 Acta Physica Polonica B
Proceedings Supplement
2020 EU About complexity of the 2.16-eV absorption band in MgO crystals irradiated with swift Xe ions G. Baubekova, A. Akilbekov, A.I. Popov, E. Shablonin, E. Vasil’chenko, M. Zdorovets, A. Lushchik https://doi.org/10.1016/j.radmeas.2020.106379 Radiation Measurements
2020 EU Single-Step Port-Reconfigurable Cavity Combiner with High Efficiency C. de la Morena, D. Regidor, A. Lara, D. Iriarte, F. Sierra, F. García, M. Weber, J. Molla, A. Ibarra https://doi.org/10.1016/j.nima.2020.164108 Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
2020 EU Preliminary sensitivity analysis for an ex-vessel LOCA without plasma shutdown for the EU DEMO WCLL blanket concept Matteo D'Onorio, Fabio Giannetti, Maria Teresa Porfiri, Gianfranco Caruso https://doi.org/10.1016/j.fusengdes.2020.111745 Fusion Engineering and Design
2020 JA Spatiotemporal dynamics of cross-field ejection events in recombining detached plasma H. Tanaka, S. Kajita, H. Natsume, I. Saeki and N. Ohno https://doi.org/10.1088/1361-6587/ab8e19 Plasma Physics and Control Fusion
2020 EU Electrical loads and power systems for the DEMO nuclear fusion project S. Minucci, S. Panella, S. Ciattaglia, M. C. Falvo, A. Lampasi https://doi.org/10.3390/en13092269 Energies
2020 EU Impact of plasma thermal transients on the design of the EU DEMO first wall protection Francesco Maviglia, Christian Bachmann, Gianfranco Federici, Thomas Franke, Mattia Siccinio, Christian Vorpahl, Raffaele Albanese, Roberto Ambrosino, Emiliano Fable, Mehdi Firdaouss, Jonathan Gerardin, Vincenzo Paolo Loschiavo, Massimiliano Mattei, Francesco Palermo, Maria Lorena Richiusa, Fabio Villone, Zsolt Vizvary https://doi.org/10.1016/j.fusengdes.2020.111713 Fusion Engineering and Design
2020 JA Dependence of Operation Density on the Density Profile Shape in DEMO Plasmas with Ar Injection for Divertor Heat Load Reduction R. Sakai, T. Fujita and A. Okamoto https://doi.org/10.1585/pfr.15.1303031 Plasma and Fusion Research
2020 JA Atomic and Molecular Processes in Plasma Decomposition Method of Hydrocarbon Gas M. Oya, R. Ikeda and K. Katayama https://doi.org/10.1585/pfr.15.2405032 Plasma and Fusion Research
2020 EU DEMO physics challenges beyond ITER M. Siccinio, W. Biel, M. Cavedon, E. Fable, G. Federici, F. Janky, H. Lux, F. Maviglia, J. Morris https://doi.org/10.1016/j.fusengdes.2020.111603 Fusion Engineering and Design
2020 JA Measurement of Dynamic Retention with Fast Ejecting System of Targeted Sample (FESTA) Q. Yue, K. Hanada, M. Oya, S. Matsuo, S. Kojima, H. Idei, T. Onchi, K. Kuroda, N. Yoshida, R. Ikezoe, Y. Liu, M. Hasegawa, S. Shimabukuro, A. Higashijima, T. Nagata and S. Kawasaki https://doi.org/10.1585/pfr.15.2402013 Plasma and Fusion Research
2020 EU Application of the best-estimate model calibration and prediction through experimental data assimilation methodology to the tests performed on a helium cooled First Wall Mock-up Bruno Gonfiotti, B. Ghidersa, M. Ionescu-Bujor, X.Z. Jin, R. Stieglitz https://doi.org/10.1016/j.fusengdes.2020.111566 Fusion Engineering and Design
2020 JA Effect of dragged magnetic field lines into RAFM steel blanket modules on first wall heat load Y. Miyoshi, R. Hiwatari, Y. Someya, N. Asakura, S. Tokunaga, Y. Homma Y. Sakamoto, The Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2020.111568 Fusion Engineering and Design
2020 EU Preliminary safety analysis of an in-vessel LOCA for the EU-DEMO WCLL blanket concept Matteo D'Onorio, Fabio Giannetti, Maria Teresa Porfiri, Gianfranco Caruso https://doi.org/10.1016/j.fusengdes.2020.111560 Fusion Engineering and Design
2020 JA Effect of collisionality dependence of thermal force on impurity transport under lower collisional condition in DEMO scrape-off layer plasma Y. Homma, K. Hoshino, S. Yamoto, S. Tokunaga, N. Asakura, Y. Sakamoto and Joint Special Design Team for Fusion DEMO https://doi.org/10.1088/1741-4326/ab7537 Nuclear Fusion
2019 JA Analysis of peak heat load on the blanket module for JA DEMO Y. Miyoshi, R. Hiwatari, Y. Someya, S. Tokunaga, Y. Homma, N. Asakura, Y. Sakamoto, K. Tobita, The Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2019.111394 Fusion Engineering and Design
2019 EU Status of Pb-16Li technologies for European DEMO Fusion Reactor M Utili, S. Bassini, L. Boccaccini, L. Bühler, F. Cismondi, A. Del Nevo, M. Eboli, F. DiFonzo, T. Hernandez, S. Wulf, M. Kordač, D. Martelli, E. Mas De les Valls, T. Melichar, C. Mistrangelo, M. Tarantino, A. Tincani, L. Vála https://doi.org/10.1016/j.fusengdes.2019.04.083 Fusion Engineering and Design

Other 13 Papers have been submitted.

European Programme towards DEMO: The Pre-Concept Design Phase (FED Special Issue on the Gate Review)

Year IA Title Authors DOI Journal
2022 EU Benefits and Challenges of Advanced Divertor Configurations in DEMO R. Kembleton et al. https://doi.org/10.1016/j.fusengdes.2022.113120 Fusion Engineering and Design
2022 EU Development of the plasma scenario for EU-DEMO: status and plans M. Siccinio et al. https://doi.org/10.1016/j.fusengdes.2022.113047 Fusion Engineering and Design
2022 EU Divertor of the European DEMO: Engineering and technologies for power exhaust J.H. You et al. https://doi.org/10.1016/j.fusengdes.2022.113010 Fusion Engineering and Design
2022 EU EU-DEMO Design Space Exploration and Design Drivers R. Kembleton et al. https://doi.org/10.1016/j.fusengdes.2022.113080 Fusion Engineering and Design
2022 EU Integrated design strategy for EU-DEMO first wall protection from plasma transients F. Maviglia et al. https://doi.org/10.1016/j.fusengdes.2022.113067 Fusion Engineering and Design
2022 EU Maturation of critical technologies for the DEMO balance of plant systems L. Barucca et al. https://doi.org/10.1016/j.fusengdes.2022.113096 Fusion Engineering and Design
2022 EU Prospective Research and Development for Fusion Commercialisation R. Kembleton et al. https://doi.org/10.1016/j.fusengdes.2022.113069 Fusion Engineering and Design
2022 EU Status and challenges for the concept design development of the EU DEMO Plant Electrical System E. Gaio et al. https://doi.org/10.1016/j.fusengdes.2022.113052 Fusion Engineering and Design
2022 EU Tokamak coolant systems and power conversion system options I. Moscato et al. https://doi.org/10.1016/j.fusengdes.2022.113093 Fusion Engineering and Design
2021 EU Containment Structures and Port Configurations C. Bachmann et al. https://doi.org/10.1016/j.fusengdes.2021.112966 Fusion Engineering and Design
2021 EU Design and feasbility of Breeding blanket vertical segment-based architecture D. Chauvin et al. https://doi.org/10.1016/j.fusengdes.2021.112941 Fusion Engineering and Design
2021 EU Design and feasibility of a pumping concept based on tritium direct recycling T. Haertl et al. https://doi.org/10.1016/j.fusengdes.2021.112969 Fusion Engineering and Design
2021 EU Development of a concept and basis for the DEMO diagnostic and control system W. Biel et al. https://doi.org/10.1016/j.fusengdes.2022.113122 Fusion Engineering and Design
2021 EU Impact of the plasma operation on the technical requirements in EU-DEMO M. Siccinio et al. https://doi.org/10.1016/j.fusengdes.2022.113123 Fusion Engineering and Design
2021 EU Integrated design of breeding blanket and ancillary systems related to the use of helium or water as a coolant and impact on the overall plant design A. Spagnuolo et al. https://doi.org/10.1016/j.fusengdes.2021.112933 Fusion Engineering and Design
2021 EU Integrated design of tokamak building concepts incl. ex-vessel maintenance C. Gliss et al. https://doi.org/10.1016/j.fusengdes.2022.113068 Fusion Engineering and Design
2021 EU Materials for In-Vessel Components G. Pintsuk et al. https://doi.org/10.1016/j.fusengdes.2021.112994 Fusion Engineering and Design
2021 EU Safety assessment for EU DEMO – Achievements and open issues in view of a generic site safety report M.T. Porfiri et al. https://doi.org/10.1016/j.fusengdes.2020.111541 Fusion Engineering and Design
2021 EU Status and future development of Heating and Current Drive for the EU DEMO M.Q Tran et al. https://doi.org/10.1016/j.fusengdes.2022.113159 Fusion Engineering and Design
2021 EU The DEMO Magnet System – Status and Future Challenges V. Corato et al. https://doi.org/10.1016/j.fusengdes.2021.112971 Fusion Engineering and Design
2021 EU The EU DEMO staged design approach in the Pre-Concept Design Phase G. Federici et al. https://doi.org/10.1016/j.fusengdes.2021.112959 Fusion Engineering and Design
2021 EU The Plan Forward for EU DEMO G. Federici https://doi.org/10.1016/j.fusengdes.2021.112960 Fusion Engineering and Design
2021 EU The pre-concept design of the DEMO Tritium, Matter Injection and Vacuum Systems C. Day et al. https://doi.org/10.1016/j.fusengdes.2022.113139 Fusion Engineering and Design

In parallel, the activities in DEMO Design are presented in the various international conferences and others.

Presentation List

Year IA Title Author Conference
2023 EU Dynamic Simulation of the DEMO Full Blanket Transporter - Exploring Model Fidelity and Sensitivity J. Eldred, T. Deighan International Multibody Dynamics Conference 2023
2023 EU Design update of the European DEMO Helium Cooled Pebble Bed breeding blanket G. Zhou, A. Retheesh, J Park, I Cristescu, F.A. Hernández, C Köhly 21st International Workshop on ceramic breeder blanket interactions (CBBI-21)
2023 EU The HCCP Test Blanket Module: Current Status in Development and Qualification of Ceramic Breeder Material and an Overview of Open Issues R. Knitter, M. Zmitko, A.G. Spagnuolo 21st International Workshop on ceramic breeder blanket interactions (CBBI-21)
2023 EU Development of a plasma scenario for the EU-DEMO reactor M. Siccinio, C. Bachmann, C. Bourdelle, M. Coleman, F. Maviglia, S. Wiesen, H. Zohm 29th IAEA Fusion Energy Conference (FEC2023)
2023 EU Progress in design and experimental activities for the development of an advanced breeding blanket I.Fernandez, I.Palermo, F.R.Urgorri, D.Rapisarda, M.González, J.Alguacil, J.P.Catalán, J.M.García, M.Kordac, I.Krastins, T.Melichar, J.A.Nogueron, R.Petras, M.Roldan, D.Sosa, D.Suarez 29th IAEA Fusion Energy Conference (FEC2023)
2023 EU The compact radiative divertor in ASDEX Upgrade and EU-DEMO, experiments & simulation O Pan, T Lunt, M Bernert, D Brida, P David, M Faitsch, A Redl, D Stieglitz, S Wiesen, M Wischmeier, U Stroth, the ASDEX Upgrade team 29th IAEA Fusion Energy Conference (FEC2023)
2023 EU W-HYDRA: a new experimental platform for the Water-Cooled Lead Lithium Breeding Blanket P. Arena, A. Del Nevo, M. Eboli, B. Gonfiotti, P. Maccari, R. Marinari, A. Tincani, N. Badodi, G. Bongiovì, I. Catanzaro, F. Galleni, A. Tarallo, A. Vannoni 29th IAEA Fusion Energy Conference (FEC2023)
2023 JA Design and development study of large superconducting TF coils to withstand high electromagnetic forces for JA DEMO H. Utoh, H. Miura, H. Arakawa, D. Echizenya, M. Hasegawa, K. Nomoto, Y. Sakamoto, and the Joint Special Design Team for Fusion DEMO 29th IAEA Fusion Energy Conference (FEC2023)
2023 JA Physics and Engineering Design of Electron Cyclotron Current Drive System for JA DEMO Y. Oda, K. Nagasaki, A. Fukuyama, T. Maekawa, H. Idei, K. Yanagihara, N. Aiba, R. Ikeda, K. Kajiwara, S. Kubo, T. Seino, K. Tobita, H. Utoh, Y. Sakamoto 29th IAEA Fusion Energy Conference (FEC2023)
2023 JA Plasma operation scenario development and required conditions in JA DEMO S. Sugiyama, N. Aiba, N. Asakura, N. Hayashi, Y. Sakamoto 29th IAEA Fusion Energy Conference (FEC2023)
2023 JA Progress of Basic Conceptual Design of JA DEMO Y. Sakamoto for the Joint Special Design Team for Fusion DEMO 29th IAEA Fusion Energy Conference (FEC2023)
2023 JA Remote Maintenance Compatibility Design for JA DEMO S. Kakudate, H. Utoh, Y. Someya, Y. Sakamoto 29th IAEA Fusion Energy Conference (FEC2023)
2023 JA Safety study and Environmental Assessment on the JA DEMO reactor Y. Someya, M. Kato, H. Nakamura, Y. Sakamoto and the Joint Special Design Team for Fusion DEMO 29th IAEA Fusion Energy Conference (FEC2023)
2023 JA/EU Simulation studies of power and He exhaust for JA and EU DEMO divertors by SONIC divertor code N. Asakura, K. Hoshino, Y. Homma, F. Subba, S. Wiesen, Y. Sakamoto 29th IAEA Fusion Energy Conference (FEC2023)
2023 EU Beam-tracing analysis of EC-assisted breakdown and high-frequency core heating in various DEMO scenarios C. Tsironis, B. Baiocchi, A. Bruschi, L. Figini, J. P. Hogge, M. Siccinio, I. Tigelis, C. Wu 20th European Fusion Theory Conference (EFTC 2023)
2023 EU Electron Cyclotron Current Drive in DEMO Plasmas E. Poli, M. Siccinio, A. Snicker, C. Wu, H. Zohm 20th European Fusion Theory Conference (EFTC 2023)
2023 JA Impact of the kinetic effect of ion parallel heat conduction on DEMO-relevant SOL plasma Homma Yuki, Hoshino Kazuo, Yamoto Shohei, Tokunaga Shinsuke, Asakura Nobuyuki, Miyato Naoaki 19th International Workshop on Plasma Edge Theory in Fusion Devices (PET-19)
2023 EU Discretization error estimation for EU-DEMO plasma-edge simulations using SOLPS-ITER with fluid neutrals W. Van Uytven, W. Dekeyser, F. Subba, S. Wiesen, N. Horsten, S. Van den Kerkhof, N. Vervloesem, M. Baelmans 19th International Workshop on Plasma Edge Theory in Fusion Devices (PET-19)
2023 EU Enabling online pedestal stability analysis with machine learning A. Kit, AE. Järvinen, S. Wiesen, V. Menkovski, I. Zaitsev, L. Chone, L. Frassinetti, H. Nystrom, ASDEX Upgrade Team JET Contributors 27th Joint EU-US Transport Task Force Meeting (TTF 2023)
2023 EU Multi-machine validation of IMEP and fusion performance predictions for ITER and DEMO T Luda di Cortemiglia, C Angioni, M G Dunne, E Fable, A Kallenbach, N Bonanomi, P A Schneider, M Siccinio, G Tardini, P Rodriguez-Fernandez, J W Hughes, N Howard, L Frassinetti, S Saarelma, The ASDEX Upgrade Team, The EUROfusion MST1 Team, The Alcator C-Mod Team and JET contributors 27th Joint EU-US Transport Task Force Meeting (TTF 2023)
2023 EU Adaptation of the first wall cooling circuits to achieve an efficient distribution of the coolant flow in the SMS DCLL breeding blanket J.A. Nogueron, I.Fernández-Berceruelo, D. Rapisarda 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Applicability of neutron measurement techniques in fission reactors to breeding blankets of DEMO P. Filliatre 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Application of optimal control in remote maintenance of tokamak breeding blankets S Herschmann, F. Milella, M. Torrance, O. Crofts 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Assessment of architectural changes that benefit remote maintenance structural feasibility for Large Port-Based Tokamaks focusing on the study of the aspect ratio and the inboard blanket segmentation L. Poszovecz, I. Katona, B. Longauer, S. Budden, O. Crofts, J. Szymanowski, K. Grodzicki 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Design of the ENEA Water Loop facility in support of the design of the DEMO Water Cooled Lead Lithium Breeding Blanket P. Arena, N. Badodi, A. Del Nevo, M. Eboli, F. Giannetti, B. Gonfiotti, D. Jaramillo Sierra 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Development of Lower Manipulator System for Breeding Blanket Maintenance within Large Port-Based Tokamaks M. Malics, L. Poszovecz, I. Katona, A. Sinha, I. Chiang 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Experimental Investigation of Heat Transfer Performance of the Helium-cooled Annular Gap in the Breeder Zone of the EU-DEMO HCPB Breeding Blanket A Abou-Sena Bradut-Eugen Ghidersa, Guangming Zhou, Joerg Rey, Francisco Hernández 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Helical-shaped Double Wall Tubes solution for the Breeding Zone cooling in the WCLL Breeding Blanket Pietro Maccari, P. Arena, R. Marinari, A. Del Nevo 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Influence of a high magnetic field to the design of the EU DEMO C. Bachmann, M. Siccinio, M. Albino, A. Chiappa, G. Falcitelli, G. Federici, L. Giannini, M. Lungaroni, C. Luongo 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Investigation on MELCOR code capabilities for the simulation of Lithium-Lead chemical interactions for fusion safety applications F. Galleni, V.Cossu, M. Moscardini, N. Forgione 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Liquid metal MHD research at KIT: fundamental phenomena and flows in complex blanket geometries L. Bühler, C. Courtessole, V. Klüber, C. Koehly and C. Mistrangelo 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Modelling transport of dust particles in the Helium-Cooled Pebble Bed breeding blanket concept D. Passafiume, M. Kamlah 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Multiphysics tritium transport modelling in WCLL breeding blankets: Influence of MHD effects and neutron damage J.Dark, R.Delaporte-Mathurin, E.Hodille, J.Mougenot, Y.Charles 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Overview of the design activities of the EU DEMO Helium Cooled Pebble Bed breeding blanket G Zhou, J Aktaa, D Alonso, F Arbeiter, L V Boccaccini, I Cristescu,... 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Parametric assessment of the Activated Corrosion Products on the ITER Water Cooled Lithium Lead Test Blanket System A. Previti, A. Colangeli, F. Dacquait, S. D’Amico, F. Fantini, D. Flammini, N. Fonnesu, G. Mariano, F. Moro, S. Noce, N. Terranova, R. Villari, P. Wouters 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Preliminary thermo-mechanical assessment of the Top Cap region of the Water-Cooled Lead-Ceramic Breeder Breeding Blanket alternative concept S. Giambrone, I. Catanzaro, G. Bongiovì, P. A. Di Maio, E. Vallone, P. Arena, F.A. Hernández, I. Moscato, G.A. Spagnuolo, P. Chiovaro, M. Giardina, A. Quartararo, E. Tomarchio 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Preparing for the First Integrated Test of a Fusion Breeding Blanket Prototype in the CHIMERA Facility T.R. Barrett, M. Bamford, M. Bastar, T. Deighan, P. Efthymiou, M. Gorley, T. Grant, D. Horsley, M. Kovari, A. Lukenskas, D. Phillippo and M. Tindall 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Safety Approach for Future Power Machine joelle Elbez-Uzan 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU System code simulation of DEMO WCLL Central Outboard Blanket equatorial cell o perational t ransients M. Principato, C. Ciurluini, F. Giannetti, A. Del Nevo 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Thermal and structural analysis of the European Water-Cooled Lithium Lead breeding blanket concept in the L-H mode transition G. Bongiovi, M. Siccinio, G. A. Spagnuolo, I. Catanzaro, P. Chiovaro, P. A. Di Maio, E. Fable, A. Quartararo, E. Vallone 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Thermal-hydraulic study of the EU-DEMO Water Cooled Lithium Lead Breeding Blanket Primary Heat Transport System E.Vallone, G.Agnello, G.Bongiovì, P.Chiovaro, P. A.Di Maio, I.Moscato, A.Quartararo, S.Vacca 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Thermofluid-Dynamic and Thermal-Structural Assessment of the EU-DEMO WCLL “Double Bundle” Breeding Blanket Concept Left Outboard segment P. A. Di Maio, I. Catanzaro, G. Bongiovì, F.M. Castrovinci, P. Chiovaro, S.Giambrone, A. Gioè, F.A. Hernández, I. Moscato, G.A. Spagnuolo, A. Quartararo, E. Vallone 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 JA Optimization in cooling design of poloidal horseshoe limiter concept for JA DEMO W. Chen, Y. Someya, S. Sugiyama, H. Utoh, N. Umeda, Y. Sakamoto 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 JA Progress of JA-DEMO Divertor Conceptual Design: Coolant Distribution and Thermal Stress Analysis Nobuyuki Asakura, Satoshi Kakudate, Weixi Chen, Vivekanand Govind Dhumal, Kit Dictado Gulay, Hiroyasu Utoh, Youji Someya, Yoshiteru Sakamoto 15th International Symposium on Fusion Nuclear Technology (ISFNT-15)
2023 EU Conceptual design studies on the magnet system for the Volumetric Neutron Source (VNS) machine draft Lorenzo Giannini, C. Luongo, G. Federici, C. Bachman, M. Siccinio, D. Leichtle MT-28 International Conference on Magnet Technology
2023 EU TF coil system, driving constants and optimization parameters Lorenzo Giannini, V. Corato, C. Luongo, C. Bachmann, M. Siccinio 16th European Conference on Applied Superconductivity (EUCAS 2023)
2023 EU Neutrons induced radiation characteristics evaluation in EU DEMO divertor using WCLL breeding blanket S.Breidokaite, G.Stankunas FuseNet PhD Event 2023
2023 EU A Systems Code Investigation of Aspect Ratio for EU-DEMO A. Pearce, G. Turkington, M. Coleman, M. Siccinio, H. Zohm 30th IEEE Symposium on Fusion Engineering (SOFE2023)
2023 EU DEMO Remote Maintenance Test Facility (RMTF) M. Hrecinuc, S. Tate, O. Crofts 30th IEEE Symposium on Fusion Engineering (SOFE2023)
2023 EU Flow-induced vibration in Double-Walled Tubes of the ITER Water-Cooled Lithium-Lead Test Blanket Module N. Sashidharan, L. Fletcher, L. Humphrey, C. Harrington, A. Spagnuolo, C. Ferrer, F. Fantini 30th IEEE Symposium on Fusion Engineering (SOFE2023)
2023 EU Geometric optimization of electrically coupled liquid metal manifolds for WCLL blankets L. Bühler, C. Mistrangelo 30th IEEE Symposium on Fusion Engineering (SOFE2023)
2023 EU Initial development of a multi-purpose remote maintenance system M.Hora, B.Drumm, S.Jimenez, M.Torrance, O.Crofts 30th IEEE Symposium on Fusion Engineering (SOFE2023)
2023 EU Preliminary accident analysis of loss of vacuum in vacuum vessel of the European DEMO using the Helium Cooled Pebble Bed blanket concept X. Jin, W. Raskob 30th IEEE Symposium on Fusion Engineering (SOFE2023)
2023 EU Sensor Fusion and Oscillation Tracking for Breeding Blanket Remote Handling C. Hume, N. Milella 30th IEEE Symposium on Fusion Engineering (SOFE2023)
2023 JA DEMO Breeding Blanket R&D in Japan - Its Progress, Issues, and Prospects for Development with TRL Criteria Definition H. Tanigawa, Y. Someya, T. Nozawa, J.H. Kim, M.Nakamichi, Y. Sakamoto, Y. Kawamura 30th IEEE Symposium on Fusion Engineering (SOFE2023)
2023 JA Strategy and progress of JA DEMO development Yoshiteru Sakamoto 30th IEEE Symposium on Fusion Engineering (SOFE2023)
2023 EU First predictive modelling of global tungsten erosion and re-deposition in the EU-DEMO with the ERO2.0 code C. Baumann, J.Romazanov, S.Rode, D.Matveev, A.Kirschner, S.Wiesen, F.Subba, J.Gerardin, X.Sáez, F.Maviglia, S.Brezinsek, Ch.Linsmeier 49th European Conference on Plasma Physics (EPS 2023)
2023 EU Studies on EU-DEMO In-Vessel Coils requirements and conceptual design for axisymmetric plasma control F.Maviglia, R.Ambrosino, I.Zammuto, H.Zohm, M.Ariola, C. Bachmann, E.Gaio, J.Gerardin, T.Härtl, D.Leichtle, C.Luongo, M.Siccinio, M.Torrance, S.Wiesen 49th European Conference on Plasma Physics (EPS 2023)
2023 EU Thermal-hydraulic study of the EU-DEMO Helium Cooled Pebble Bed Breeding Blanket Primary Heat Transport System E.Vallone, G. Agnello, G. Bongiovì, F. M. Castrovinci, S. D’Amico, P. A. Di Maio, I. Moscato, A. Quartararo 40th International Heat Transfer Conference (UIT)
2023 EU Dose rate assessment for tungsten in divertor and breeding blanket armour structures for EU DEMO S.Breidokaite, G.Stankunas 19th International Conference on Plasma-Facing Materials and Components for Fusion Applications (PFMC-19)
2022 JA Predictive Calculation of Fuel Inventory in Plasma-Facing Wall of JA DEMO Reactor M. Oya, K. Hoshino, N. Asakura, Y. Sakamoto, N. Ohno, K. Hanada 31st International Toki Conference on Plasma and Fusion Research (ITC31)
2022 EU EIRENE modelling with improved CRMs for spectroscopic RT detachment control in EU-DEMO D. Borodin, F.Cianfrani, B.Küppers, S.Wiesen, P.Börner, Y.Marandet, S.Brezinsek, W.Biel 4th Technical Meeting on Divertor Concepts
2022 EU The EU-DEMO Exhaust Modelling Roadmap – Numerical Implementation and Methods S. Wiesen, L. Aho-Mantila, R. Osawa, F. Subba, S. Van den Kerkhof, S. Carusotti, M. Coleman, F. Maviglia, M. Siccinio, H. Zohm, M. Bernert, S. Brezinsek, S. Dasbach, A. Kit, Y. Poels, A. Jaervinen, D. Matveev, J. Romazanov, M. Wischmeier 4th Technical Meeting on Divertor Concepts
2022 JA Simulation studies of He and particle exhaust in detached divertor for JA DEMO design Nobuyuki Asakura, Kazuo Hoshino, Yuki Homma, Yoshiteru Sakamoto, Shinsuke Tokunaga and the Joint Special Design Team for Fusion DEMO 4th Technical Meeting on Divertor Concepts
2022 JA Bending strain property of DEMO candidate Nb3Sn wires in Japan Nobuya Banno, Tsuyoshi Yagai, Shinya Kawashima, Masahiro Sugimoto, Satoshi Awaji, Hiroyasu Utoh, Yoshiteru Sakamoto The Applied Superconductivity Conference (ASC2022)
2022 EU Kinetic and magnetic control of fusion power fluctuations in EU-DEMO M. Siccinio, P. David, L. E. Di Grazia, E. Fable, M. Mattei, F. Maviglia, Ch. Tsironis, D. Van Eester, P. Vincenzi, C. Wu, H. Zohm 64th Annual Meeting of the APS Division of Plasma Physics (APS)
2022 JA Techniques of tritium decontamination on plasma-facing walls in DEMO N. Ashikawa and Y. Torikai IAEA-TM on Plasma Physics and Technology Aspects of the Tritium Fuel Cycle for Fusion Energy
2022 JA Integrated modeling of runaway electrons in JA-DEMO disruptions Y. Yamamoto, A. Matsuyama 6th Asia Pacific Conference on Plasma Physics (AAPPS-DPP2021)
2022 EU The performance of EU-DEMO under different wave heating mixes: A look into the physics and technology of ECRH and ICRH scenarios G. Suarez Lopez, R. Bilato, V. Bobkov, A. Di Siena, F. Durodie, H. Faugel, E. Fable, V. Maquet, A. Messiaen, D. Milanesio, R. Ochoukov, M. Siccinio, G. Tardini, W. Tierens, M. Usoltceva, C. Wu, H. Zohm 24th Topical Conference on Radio-frequency Power in Plasmas
2022 JA Design Ac tivities of ECH/CD system for JA DEMO Yasuhisa Oda, Kazunobu Nagasaki, Atsushi Fukuyama, Takashi Maekawa, Hiroshi Idei, Kota Yanagihara, Nobuyuki Aiba, Ryosuke Ikeda, Ken Kajiwara, Shin Kubo, Tomohiro Seino, Kenji Tobita, Hiroyasu Utoh, Yoshiteru Sakamoto 24th Topical Conference on Radio-frequency Power in Plasmas
2022 EU A simple MHD model for coupling poloidal manifolds to breeder units in liquid metal blankets L. Buhler, C. Mistrangelo 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Advancements in the design of the DEMO driver blanket system during the EU DEMO Pre-Conceptual Design Phase: Overview, Challenges and Opportunities F.A. Hernandez, P. Arena, L.V. Boccaccini, I. Cristescu, A. Del Nevo, P. Sardain, G.A. Spagnuolo, M. Utili, A. Venturini, G. Zhou 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Alternative solution for breeding blanket remote maintenance in fusion reactors C. Li, H.Wu, H.Eskelinen 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU An alternative design strategy for the Water Cooled Lead-Lithium Breeding Blanket: the beam concept V Imbriani, P.Arena, A.Del Nevo, R.Mozzillo 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Concept of contamination control door for DEMO and proof of principle design Y. Wang, M. Mittwollen, C. Baars, J. Oellerich, V. Madzharov 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Development of a MELCOR thermal-hydraulic model for the EU-DEMO Tokamak building M. D'Onorio, M.T.Porfiri, S.Ciattaglia, C.Gliss, G.Carsuo 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Development of an Alternative Remote Handling Solution for Breeding Blanket Maintenance within DEMO A Sinha, S. Budden, S. Tate, M. Torrance, O. Crofts, S. Desiderati, F. Vigano, F. Lucca, E. Walcz, I. Katona, L. Poszovecz 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Experimental investigation of pressure drop in a WCLL TBM mock-up C. Courtessole, H.J. Brinkmann, L. Buhler, J. Roth 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Experimental thermal-hydraulic testing of a prototypical mock-up of the fuel-breeder pin concept for the EU-DEMO HCPB breeding blanket Ali Abou-Sena, Bradut-Eugen Ghidersa, Guangming Zhou, Joerg Rey, Francisco A. Hernández, Martin Lux, Georg Schlindwein 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Modelling the Transport of Activated Corrosion Products in the WCLL-TBS PbLi Loop with the GETTHEM System-Level Code A. Froio, F. Lisanti, P. Arena, R. Bonifetto, A. Del Nevo, A. Froio, G. A. Spagnuolo, and R. Zanino 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Remote maintenance system dynamic simulation - understanding model uncertainty and robust design of operation J Eldred, T. Deighan, R, Powell, S. Budden 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Studies on EU-DEMO 3D coils requirements and conceptual design for error field correction and plasma control F. Maviglia, L. Pigatto, F. Villone, H. Zohma, C. Albert, C. Bachmann , P. Bruzzone, R. Buchholz, B. Drumm, J. Gerardin, C. Luongo, M. Porton, M. Siccinio, S. Wiesen 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Thermal-hydraulic experiments in support of the Helium Cooled Pebble Bed Blanket design within the EU-DEMO project B-E Ghidersa, Bradut-Eugen Ghidersa, Guangming Zhou, Michael Rieth, Thomas Emmerich, Ali Abou-Sena, Jörg Rey, Georg Schlindwein, Francisco Alberto Hernandez Gonzalez, Frederik Arbeiter, Jarir Aktaa, Lorenzo Virgilio Boccaccini 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Water Chemistry Impact On Activated Corrosion Products Assessment In Tokamak Reactors M D'Onorio, M.Molinari, G.Mariano, N.Terranova, G.Caruso 32nd Symposium on Fusion Technology (SOFT2022)
2022 JA External control of three-dimensional magnetic field applicable to DEMO Go Matsunaga, Yasuhiro Suzuki, Kouji Shinohara, Nobuyuki Aiba, Hiroyasu Uto, Yoshiteru Sakamoto 32nd Symposium on Fusion Technology (SOFT2022)
2022 JA Study on T production using high temperature gas cooled reactor for DEMO fusion reactor H. Matsuura, T. Abe, K. Kitagawa, Y. Koga, K. Nakagwa, M. Naoi, K. Katayama, T. Otsuka, M. Goto, S. Nakagawa, S. Hamamoto, E. Ishitsuka, K. Tobita, S. Konishi, R. Hiwatari, Y. Someya, and Y. Sakamoto 32nd Symposium on Fusion Technology (SOFT2022)
2022 EU Analysis of Large Helium Ingress into the DEMO Cryostat Using MELCOR for Fusion R. Krpan, J.Kokalj, M.Uršič, M.Leskovar, B.Končar 31st International Conference Nuclear Energy for New Europe (NENE2020)
2022 JA Deuterium desorption from heavy ion irradiated tungsten using isothermal desorption method N.Ashikawa, A.Ohwada, Y.Torikai, Y.Hayashi, K.Yabuuchi, Y.Someya 13th International Symposium on Advanced Energy Science
2022 EU R&D and next-step devices for breeding blanket development toward EU-DEMO L.V. Boccaccini, A. Del Nevo, F. Hernandez, G.A. Spagnuolo 8th IAEA DEMO Programme Workshop (DPWS-8)
2022 EU/JA DEMO Activities in BA phase II Susana Clement and the IFERC Integrated Project Team 8th IAEA DEMO Programme Workshop (DPWS-8)
2022 JA JP facilities anticipated for DEMO BB preparation Hiroyasu Tanigawa 8th IAEA DEMO Programme Workshop (DPWS-8)
2022 JA Plasma physics performance and impact on plant efficiency Yoshiteru Sakamoto 8th IAEA DEMO Programme Workshop (DPWS-8)
2022 EU Magnetohydrodynamic flows in strong magnetic fields for application in fusion blankets L. Buhler, C. Courtessole, C. Mistrangelo 12th PAMIR International Conference on Fundamental and Applied MHD
2022 EU Impurity modelling with European Transport Simulator: implementation and verification D Yadykin, I. Ivanova-Stanik, T.Jonsson, D. Coster, K. Kirov, D. Kalupin 48th European Conference on Plasma Physics (EPS 2022)
2022 EU Integrated modeling of H-mode tokamak plasma confinement T. Luda di Cortemiglia, C. Angioni, M. G. Dunne, E. Fable, A. Kallenbach, T. Lunt, N. Bonanomi, P. A. Schneider, M. Siccinio, G. Tardini, the ASDEX Upgrade Team, the EUROfusion MST1 Team, P. Rodriguez-Fernandez, J. Hughes, the C-Mod Team, L. Frassinetti and JET Contributors 48th European Conference on Plasma Physics (EPS 2022)
2022 JA Recent Developments of Plasma Exhaust and Divertor Design for Tokamak DEMO Reactors Nobuyuki Asakura 25th International Conference on Plasma Surface Interactions in Controlled Fusion Devices (PSI-25)
2022 EU STATUS OF DESIGN BASIS ACCIDENT ANALYSES AND SAFETY CODES APPLICATION FOR EUROPEAN DEMO X. Jin, M. T. Porfiri, R. Stieglitz Technical Meeting on Synergies in Technology Development between Nuclear Fission and Fusion for Energy Production
2022 EU On the effectivenss of passive hydrogen mitigation systems during a beyond design basis accident in a fusion DEMO plant M D'Onorio, G. Mazzini, M.T. Porfiri, G. Caruso 19th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-19)
2021 JA Development of poloidal horseshoe limiter concept for JA DEMO Weixi Chen, Yoji Someya, Mitsuhiro Arikawa, Hiroyasu Utoh, Ryoji Hiwatari, Naotaka Umeda, Satoshi Kakudate, Yoshiteru Sakamoto, and Joint Special Design Team for Fusion DEMO 29th IEEE Symposium on Fusion Engineering (SOFE-2021)
2021 JA Effective Decomposition of Water Vapor in RF plasma with Carbon Deposition M. Oya, R. Ikeda and K. Katayama 30th International Toki Conference on Plasma and Fusion Research (ITC30)
2021 JA Extension of Particle Balance Model Including Plasma Wall Interaction for Long-Term Operation of Fusion Reactor K. Okumura, K. Hoshino, A. Hatayama, K. Hanada 30th International Toki Conference on Plasma and Fusion Research (ITC30)
2021 JA Progress of conceptual design and key engineering issues on JA DEMO Y. Someya, Y. Sakamoto, R. Hiwatari, N. Aiba, H. Utoh,
and The Joint Special Design Team for Fusion DEMO
30th International Toki Conference on Plasma and Fusion Research (ITC30)
2021 JA Design study of superconducting TF coil concept with rectangular conductor layer winding with high manufacturability and insulation reliability for JA DEMO Hiroyasu Utoh, Hideaki Miura, Hitoshi Arakawa, Daisuke Echizenya, Mitsuru Hasegawa, Kazuhiro Nomoto, Ryoji Hiwatari, Yoshiteru Sakamoto, Joint Special Design Team for Fusion Demo 27th International Conference on Magnet Technology (MT27)
2021 JA Study on tritium release behavior from neutron- irradiated Li2TiO3 under different purge gases Akito Ipponsugi, Kazunari Katayama, Tsuyoshi Hoshino 20th International Conference on Fusion Reactor Materials (ICFRM-20)
2021 JA Tritium permeation from tritiated water to water through Inconel Kazunari Katayama, Taku Matsumoto, Akito Ipponsugi, Youji Someya 20th International Conference on Fusion Reactor Materials (ICFRM-20)
2021 JA Pulse Shape Dependence of Vapor Shielding Efficiencies During Transient Heat Loads Kenzo IBANO, Yoshio UEDA, Tomonori TAKIZUKA 1st Workshop on Artificial Intelligence in Plasma Science
2021 JA Improvement of Neutral Transport Model in SONIC toward DEMO M. Nakano, K. Hoshino, S. Yamoto, Y. Homma, N. Asakura 18th International Workshop on Plasma Edge Theory in Fusion Devices (PET21)
2021 JA Investigation of neutral-neutral collision model in the DEMO level divertor by SONIC simulation K. Hoshino, S. Tokunaga, S. Yamoto, Y. Homma, N. Asakura 18th International Workshop on Plasma Edge Theory in Fusion Devices (PET21)
2021 JA Deuterium desorption from heavy ion irradiated tungsten using isothermal desorption method N.Ashikawa, H.Takaoka,Y.Torikai,Y.Hayashi,T.Hinoki, K.Yabuuchi,Y.Someya 12th International Symposium on Advanced Energy Science (2021)
2021 EU Design considerations of the european DEMO’s IR-interferometer/polarimeter based on TRAVIS simulations Brunner, K J International Conference on Diagnostics For Fusion Reactors (ICFRD2020)
2021 EU Diagnostic Integration concepts for DEMO – The reflectometry example Malaquias, A International Conference on Diagnostics For Fusion Reactors (ICFRD2020)
2021 EU On preliminary considerations towards development of radiated power and SXR diagnostics for DEMO Chernyshova, M International Conference on Diagnostics For Fusion Reactors (ICFRD2020)
2021 EU Overview on the development of the plasma diagnostic and control system for the European DEMO reactor concept Biel, W. International Conference on Diagnostics For Fusion Reactors (ICFRD2020)
2021 JA Present status of the conceptual study of the DEMO gamma-ray diagnostic Giacomelli, L. International Conference on Diagnostics For Fusion Reactors (ICFRD2020)
2021 EU Co-wound superconducting wire for quench detection in fusion magnets Bykovskiy, N 15th European Conference on Applied Superconductivity (EUCAS 2021)
2021 EU Diffusion bonding between strands for splices of Rutherford cables for highfield accelerator magnets DAuria, V 15th European Conference on Applied Superconductivity (EUCAS 2021)
2021 EU HTS fusion conductor from aligned stacks transposed in Roebel arrangement (ASTRA) Bykovskiy, N 15th European Conference on Applied Superconductivity (EUCAS 2021)
2021 EU Recent advances at ENEA on LTS and HTS Cable-in-Conduit Conductors for fusion Muzzi, L 23rd joint Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC/ICMC'21)
2021 EU Horizon EUROfusion: The EUROfusion programme during Horizon Europe Donné, AJH DTT (Divertor Taokamak Test) Science Meeting
2021 EU Analytical Inversion of Tridiagonal matrices used in solvers for Diffusion Problems Glage, Till Diffusion in Solids and Liquids
2021 EU Numerical Solution Strategies in Permeation Processes von der Weth, Axel Diffusion in Solids and Liquids
2021 EU Towards a fusion reactor: integration of physics and technology Morris, AW 47th European Conference on Plasma Physics (EPS 2020)
2021 EU Modelling WCLL breeder blankets Dark, J 15th International Workshop on Hydrogen Isotopes in Fusion Reactor Materials
2021 EU Predictive 3D modelling of erosion and deposition in ITER with ERO2.0: from beryllium main wall, tungsten divertor to full-tungsten device Kirschner, A 18th International Conference on Plasma-Facing Materials and Components for Fusion Applications (PFMC-18)
2021 EU Increasing irradiation and thermo-hydraulic performance of breeding blankets by ODS steel plating Rieth, M 28th IAEA Fusion Energy Conference (FEC 2020)
2021 EU Maintenance of a Fusion Power Plant: The EU Approach Crofts, O 28th IAEA Fusion Energy Conference (FEC 2020)
2021 EU Materials and Components for the DEMO Divertor Neu, R 28th IAEA Fusion Energy Conference (FEC 2020)
2021 EU/JA Plasma Exhaust and Divertor Designs in Japan and Europe Broader Approach, DEMO Design Activity N. Asakura, K. Hoshino, Y. Homma, C. Vorpahl, F. Subba, H. Utoh, Y. Someya, S. Kakudate, S. Suzuki, Y. Sakamoto, R. Hiwatari, M. Siccinio, G. Federici, J. You 28th IAEA Fusion Energy Conference (FEC 2020)
2021 JA Design study of large superconducting coil system for JA DEMO H. Utoh, Y. Itoh, R. Hiwatari, Y. Sakamoto, Y. Someya, N. Asakura, Y. Miyoshi, Y. Homma, N. Nakajima, K. Tobita and the Joint Special Design Team for Fusion DEMO 28th IAEA Fusion Energy Conference (FEC 2020)
2021 JA Plasma Exhaust and Divertor Designs in Japan and Europe Broader Approach, DEMO Design Activity N. Asakura, K. Hoshino, Y. Homma, C. Vorpahl, F. Subba, H. Utoh, Y. Someya, S. Kakudate, S. Suzuki, Y. Sakamoto, R. Hiwatari, M. Siccinio, G. Federici, J. You 28th IAEA Fusion Energy Conference (FEC 2020)
2021 JA Progress in design andengineering issues on JA DEMO Y. Someya,Y. Sakamoto, R. Hiwatari, Y. Miyoshi, S. Kakudate, H. Utoh, N. Asakura, Y. Homma, N. Nakajima, K. Tobita and the Joint Special Design Team for Fusion DEMO 28th IAEA Fusion Energy Conference (FEC 2020)
2021 EU Nuclear analysis and assessment of irradiation effects on the Divertor Plasma Facing Components of the DEMO fusion reactor Noce, S International Conference on Processing & Manufacturing of Advanced Materials (Thermec'2021)
2021 EU Nuclear fusion materials: supply and demand on the world market and manufacturing techniques needed Lungaroni, M International Conference on Processing & Manufacturing of Advanced Materials (Thermec'2021)
2021 EU Tungsten fibre-reinforced copper – a high-conductivity, high-strength composite material for plasma-facing component applications von Mueller, A TMS 2021 Annual Meeting & Exhibition
2021 EU Impact of plasma-wall interaction and exhaust on EU-DEMO design criteria Siccinio, M 24th International Conference on Plasma Surface Interactions in Controlled Fusion Devices (PSI2020)
2020 EU Thermal-Hydraulic Analysis of the DEMO PF Coils Designed by CEA M. Lewandowska, A. Dembkowska, L. Zani, B. Lacroix 33rd International Symposium on Superconductivity (ISS2020)
2020 JA Design study of superconducting magnet system for JA DEMO H.Utoh, H. Nakajima, R. Hiwatari, Y. Sakamoto, Y. Someya, N. Aiba, N. Nakajima, and Joint Special Design Team for Fusion Demo 33rd International Symposium on Superconductivity (ISS2020)
2020 EU Strategical approach for the neutronics in the European fusion programme D Leichtle, U. Fischer, C. Bachmann Technology of Fusion Energy (TOFE 2020)
2020 JA Influence of chemical form of bred tritium in the blanket on tritium dynamics in fuel cycle system of fusion reactors R. Oyama, A. Ipponsugi, T. Matsumoto, K. Katayama 3rd Asia Pacific Symposium on Tritium Science (APSOT-3)
2020 JA Modeling of Hydrogen Permeation Behavior through Tungsten Deposition Layer Growing on Nickel Substrate by Hydrogen Plasma Sputtering Y. Hara, K. Katayama, M. Oya, D. Mori 3rd Asia Pacific Symposium on Tritium Science (APSOT-3)
2020 JA Difference of Dynamic Retention from Different Samples Using Fast Ejecting System of Targeted Sample (FESTA) Q. Yue, K. Hanada, M. Oya, S. Kojima, H. Idei, T. Onchi, K. Kuroda, N. Yoshida, R. Ikezoe, M. Hasegawa, S. Shimabukuro, A. Higashijima, T. Nagata, S. Kawasaki 29th International Toki Conference on Plasma and Fusion Research (ITC29)
2020 JA Edge transport barrier model for simulating H-mode operation scenario in DEMO with integrated plasma transport code TOTAL Y. Itakura, T. Fujita, A. Okamoto 29th International Toki Conference on Plasma and Fusion Research (ITC29)
2020 JA Simulation of Deuterium Retention in Tungsten under Periodic Deuterium Plasma Irradiation M. Oya, R. Ikeda, K. Katayama and K. Ohya 29th International Toki Conference on Plasma and Fusion Research (ITC29)
2020 EU Measurement of Tc distribution in Nb3Sn React & Wind conductor prototype for European DEMO C. Frittitta, K.Sedlak, P.Bruzzone ASC Applied Superconductivity Conference (ASC 2020)
2020 EU From ITER to DEMO: Towards Multi-Purpose Multi-MW Gyrotrons Operating above 200 GHz Tobias. Ruess, K. A. Avramidis, G. Gantenbein, S. Illy, Z. Ioannidis, J. Jin, I. Gr. Pagonakis, T. Rzesnicki, M. Thumm, J. Weggen, and J. Jelonnek 7th ITG International Vacuum Electronics Workshop (IVEW) 2020 and 13th International Vacuum Electron Sources Conference (IVeSC) 2020
2020 EU High Power CW Gyrotron Development at KIT: Current Status and Future Prospects S. Illy, K.A. Avramidis, B. Ell, G. Gantenbein, Z. Ioannidis, J. Jin, L. Krier, A. Marek, I.Gr. Pagonakis, S. Stanculovic, T. Ruess, T. Rzesnicki, M. Thumm, C. Wu, and J. Jelonnek 7th ITG International Vacuum Electronics Workshop (IVEW) 2020 and 13th International Vacuum Electron Sources Conference (IVeSC) 2020
2020 EU Basic design considerations for a frequency-tunable ECRH&CD system to suppress NTMs in DEMO C. Wu, K. Avramidis, A. Bruschi, E. Fable, T. Franke, G. Gantenbein, G. Granucci, S. Garavaglia, S. Illy, F. Janky, J. Jelonnek, O. Kudlacek, A. Moro, E. Poli, R. Schramm, M. Siccinio, A. Snicker, G. Suárez López, G. Tardini, M. Thumm, M. Q. Tran, H. Zohm 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Challenges and progress on the path towards fusion energy AJH. Donné 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Cooling Water Chemistry for DEMO - Preliminary Testing Experience for Corrosion Evaluation R Torella, E. Lo Piccolo, N. Terranova, L. Di Pace 31st Symposium on Fusion Technology (SOFT2020)
2020 EU DEMO Maintenance Overview O. Crofts, A. O’Hare, S. Budden, R. Powell, V. Milushev, S. Mühlig-Hofmann 31st Symposium on Fusion Technology (SOFT2020)
2020 EU DEMO Single Null Inner Mid-plane Limiter RM feasibility study E. Flynn, P. Cooper, O. Crofts, A. Loving, Z. Vizvary, A. Wilde 31st Symposium on Fusion Technology (SOFT2020)
2020 EU High Temperature Superconductors for Fusion Applications M.J. Wolf, W.H. Fietz, R. Heller, D. Nickel, K.P. Weiss 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Hydraulic assessment of an upgraded pipework arrangement for the DEMO divertor plasma facing components cooling circuit P. A. Di Maio, R. Burlon, G. Mazzone, A. Quartararo, E. Vallone, J. H. You 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Integrated strategy of limiter design for EU-DEMO first wall protection from plasma transients F Maviglia, C. Bachmann, G. Federici, T. Franke, M. Siccinio, R. Albanese, R. Ambrosino, R. Bonifetto, G. Calabrò, R. De Luca, E. Fable, P. Fanelli, A. Fanni, M. Firdaouss, J. Gerardin, F. Palermo, G. Pautasso, S. Pestchanyi, M. Lorena Richiusa, G. Sias, F. Subba, F. Villone, Z. Vizvary 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Integration issues on tritium management of the European DEMO Breeding Blanket and ancillary systems G.A. Spagnuolo, R. Arredondo, M. Colemann, I. Cristescu, G. Federici, F. Franza, B. Garcinuño, C. Moreno, D. Rapisarda, F. R. Urgorri, M. Utili 31st Symposium on Fusion Technology (SOFT2020)
2020 EU MHD flow in liquid metal blankets: major design issues, numerical analysis and code validation C. Mistrangelo, L. Bühler, V. Klüber, S. Smolentsev, I. Maione, J. Aubert 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Neutronics studies in support of European DEMO Divertor design R Villari, D. Flammini, G. Mariano, G. Mazzone, F. Moro, S. Noce and J.H. You 31st Symposium on Fusion Technology (SOFT2020)
2020 EU New approaches for magnetic diagnostic of future fusion devices I. Duran, S. Entler, K. Kovařík, A. Torres, P. Turjanica, J. Reboun, L. Viererbl, D. Najman, M. Kočan, G. Vayakis, K. Výborný, Z. Šobáň, M. Kohout, V. Mortet, A. Taylor, P. Moreau, F.P. Pellissier, A. Le-Luyer, P. Spuig, W. Biel, T. Franke 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Overview of the current waste strategy for a European DEMO fusion reactor R. Vale, L.Di Pace, J.Bromley, M.Gilbert, T.Rey 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Poloidal distribution of penalty factors for DEMO single module segment with limiters in normal operation ML Richiusa, W. Arter, M. Firdaouss, J. Gerardin, F. Maviglia, Z. Vizvary 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Pre-conceptual design of EU-DEMO Divertor primary heat transfer systems E Vallone, L. Barucca, S. Ciattaglia, P. A.Di Maio, G. Federici, M. Giardina, I. Moscato, A. Tarallo. 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Structural assessment of the EU-DEMO WCLL Central Outboard Blanket Segment under normal and off-normal operating conditions I Catanzaro, P.Arena, G.Bongiovi, P.Chiovaro, A.Del Nevo, P.A.Di Maio, R.Forte, I.A.Maione 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Thermal-hydraulic study of the DEMO divertor cassette body cooling circuit equipped with a liner and two reflector plates P. A. Di Maio, G. Mazzone, I. Moscato, A. Quartararo, E. Tomarchio, E. Vallone, J. H. You 31st Symposium on Fusion Technology (SOFT2020)
2020 JA Effect of temperature gradient on tritium permeation rate to cooling water in JA DEMO condition K. Katayama, Y. Someya, T. Chikada, K. Tobita, H. Nakamura, Y. Hatano, R. Hiwatari and Y. Sakamoto 31st Symposium on Fusion Technology (SOFT2020)
2020 JA Evaluation of tritium confinement performance of the assembly composed of Zr and Al2O3 simulating Li rod D. Henzen, K. Katayama, H. Matsuura 31st Symposium on Fusion Technology (SOFT2020)
2020 JA Study on pulse shape dependence of tungsten mass erosion under disruption-like heat load in high magnetic field D. Motoi, K. Ibano, Y. Kikuchi, S. Saito, T. Okita, E. Hoashi and Y. Ueda 31st Symposium on Fusion Technology (SOFT2020)
2020 JA T containment property of Zr-included Li rod in high-temperature gas-cooled reactor as a T production device for fusion reactors H. Matsuura, T. Suganuma, Y. Koga, M. Naoi, K. Katayama, T. Otsuka, M. Goto, S. Nakagawa, S. Hamamoto, E. Ishitsuka, K. Tobita, S. Konishi, R. Hiwatari, Y. Someya, and Y. Sakamoto 31st Symposium on Fusion Technology (SOFT2020)
2020 JA Tritium Release Behavior from Neutron-Irradiated Li2TiO3 pebbles Long-term Heated under H2 Atmosphere A. Ipponsugi, K. Katayama, T. Hoshino 31st Symposium on Fusion Technology (SOFT2020)
2020 EU Strategy of an integrated limiter design for EU-DEMO first wall protection from plasma transient events F. Maviglia, G. Federici, M. Siccinio, R. Ambrosino, R. Bonifetto, G. Calabrò, R. De Luca, E. Fable, P. Fanelli, A. Fanni, M. Firdaouss, J. Gerardin, R. Lombroni, G. Maddaluno, M. Moscheni, F. Palermo, G. Pautasso, S. Pestchanyi, R. Giuseppe, M. L. Richiusa, G. Sias, F. Subba, F. Villone, Z. Vizvary IAEA Technical Meeting on Plasma Disruptions and their Mitigation
2020 EU Supervisory remote handling procedures at IFMIF-DONES M. Ferre, S.Coloma European Robotics Forum 2020
2020 JA Conceptual design study of superconducting magnet system for the JA DEMO H.Utoh, R. Hiwatari, Y. Sakamoto, Y. Someya, N. Nakajima, and Joint Special Design Team for Fusion Demo 10th ACASC/2nd Asian-ICMC/ CSSJ Joint Conference

DEMO design activity was summarized in the 1st intermediate report in February 2015, the 2nd intermediate report in February 2017, and final report in February 2020, respectively. Herein, scientific and technological achievements related to BA DEMO Design activity in 2012-2020 are presented as the peer reviewed papers. In total, 557 peer reviewed papers were published.

Year PI Title Authors DOI Journal name
2020 EU DEMO physics challenges beyond ITER M. Siccinio, W. Biel, M. Cavedon, E. Fable, G. Federici, F. Janky, H.Lux, F. Maviglia, J. Morris, F. Palermo, O. Sauter, F. Subba, H. Zohm https://doi.org/10.1016/j.fusengdes.2020.111603 Fusion Engineering and Design
2020 EU Experimental investigation of liquid metal MHD flow entering a flow channel insert L. Bühler, C. Mistrangelo, H.-J. Brinkmann https://doi.org/10.1016/j.fusengdes.2020.111484 Fusion Engineering and Design
2020 EU Impact of plasma thermal transients on the design of the EU DEMO first wall protection F. Maviglia, C. Bachmann, G. Federici, T. Franke, M. Siccinio, C. Vorpahl, R. Albanese, R. Ambrosino, E. Fable, M. Firdaous, J. Gerardin, V. Paolo Loschiavo, M. Mattei, F. Palermo, M. Lorena Richiusa, F. Villone, Z. Vizvary https://doi.org/10.1016/j.fusengdes.2020.111713 Fusion Engineering and Design
2020 EU Investigation of the DEMO WCLL Breeding Blanket Cooling Water Activation P. Chiovaro, S. Ciattaglia, F. Cismondi, A. Del Nevo, P.A. Di Maio, G. Federici, C. Frittitta, I. Moscato, G.A. Spagnuolo, E. Vallone https://doi.org/10.1016/j.fusengdes.2020.111697 Fusion Engineering and Design
2020 EU Key Design Integration Issues addressed in the EU DEMO pre-concept design phase C. Bachmann, S. Ciattaglia, F. Cismondi, C. Gliss, G. Federici, T. Härtl, G. Keech, R. Kembleton, F. Maviglia, M. Siccinio https://doi.org/10.1016/j.fusengdes.2020.111595 Fusion Engineering and Design
2020 EU Progress of the conceptual design of the European DEMO breeding blanket, tritium extraction and coolant purification systems F.C. Cismondi, L.V. Boccaccini, P. Chiovaro, S. Ciattaglia, I. Cristescu, C. Day, A. Del Nevo, P.A. Di Maio, G. Federici, F. Hernandez, C. Moreno, I. Moscato, D. Rapisarda, A. Santucci, G.A. Spagnuolo, M. Utili https://doi.org/10.1016/j.fusengdes.2020.111640 Fusion Engineering and Design
2020 EU Required, achievable and target TBR for the European DEMO U. Fischer, L.V. Boccaccini, F. Cismondi, M. Coleman, C. Day, Y. Hörstensmeyer, F. Moro, P. Pereslavtsev https://doi.org/10.1016/j.fusengdes.2020.111553 Fusion Engineering and Design
2020 EU Safety Assessment for European DEMO – Achievements and Open Issues in View of a Generic Site Safety Report M.T. Porfiri, N. Taylor, S. Ciattaglia, X. Z. Jin, J. Johnston, B. Colling, T. Eade, D. Carloni, T. Pinna, E. Urbonavicius, R. Vale, A. Volkanovski, G. Caruso, W. Hering, R. Stieglitz https://doi.org/10.1016/j.fusengdes.2020.111541 Fusion Engineering and Design
2020 EU Test Blanket Modules (ITER) and Breeding Blanket (DEMO): history of major fabrication technologies development of HCLL and HCPB and status L. Forest, L.V. Boccaccini, L. Cogneau, A. Li Puma, H. Neuberger, S. Pascal, J. Rey, N. Thomas, J. Tosi, M. Zmitko https://doi.org/10.1016/j.fusengdes.2020.111493 Fusion Engineering and Design
2020 EU Test Series D experimental results for SIMMER code validation of WCLL BB in-box LOCA in LIFUS5/Mod3 facility M. Eboli, S. Khani Moghanaki, N. Forgione, R. Maria Crugnola, A. Del Nevo https://doi.org/10.1016/j.fusengdes.2020.111582 Fusion Engineering and Design
2020 EU The EU DEMO equatorial outboard limiter – design and port integration concept T. Franke, C. Bachmann, W. Biel, F. Cismondi, O. Crofts, A. Cufar, G. Federici, W. Gonzalez, R. Gowland, G. Keech, R. Mozzillo, F. Maviglia, M. Roccella, M. Tokar, Z. Vizvary https://doi.org/10.1016/j.fusengdes.2020.111647 Fusion Engineering and Design
2020 JA Analysis of peak heat load on the blanket module for JA DEMO Y. Miyoshi, R. Hiwatari, Y. Someya, S. Tokunaga, Y. Homma, N. Asakura, Y. Sakamoto, K. Tobita and the Joint Special Design Team for FUsion DEMO https://doi.org/10.1016/j.fusengdes.2019.111394 Fusion Engineering and Design
2020 JA Effect of dragged magnetic field lines into RAFM steel blanket modules on first wall heat load Y. Miyoshi, R. Hiwatari, Y. Someya, N. Asakura, S. Tokunaga, Y. Homma Y. Sakamoto, The Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2020.111568 Fusion Engineering and Design
2020 EU AC Loss Measurement of the DEMO TF React&Wind Conductor Prototype No. 2 K. Sedlak, P. Bruzzone, B. Stepanov, V. Corato https://doi.org/10.1109/TASC.2019.2961067 IEEE Transactions on Applied Superconductivity
2020 EU CEA Broad Design Studies on EU DEMO TF, CS and PF Magnet Systems L. Zani, F. Bonne, V. Corato, Q.L. Coz, C. Hoa, B. Lacroix, N. Misiara, F. Nunio, R. Radhakrishnan, K. Sedlak, A. Torre, R. Vallcorba, C. Vorpahl https://doi.org/10.1109/TASC.2020.2976056 IEEE Transactions on Applied Superconductivity
2020 EU Progress in the Design of a Hybrid HTS-Nb3Sn-NbTi Central Solenoid for the EU DEMO X. Sarasola, R. Wesche, I. Ivashov, K. Sedlak, D. Uglietti, P. Bruzzone https://doi.org/10.1109/TASC.2020.2965066 IEEE Transactions on Applied Superconductivity
2020 EU&JA Comparison of the Process Systems Code With the SONIC Divertor Code J. Morris, N. Asakura, Y. Homma, K. Hoshino, M. Kovari https://doi.org/10.1109/TPS.2020.2967859 IEEE Transactions on Plasma Science
2020 JA Effect of collisionality dependence of thermal force on impurity transport under lower collisional condition in DEMO scrape-off layer plasma Y. Homma, K. Hoshino, S. Yamoto, S. Tokunaga, N. Asakura, Y. Sakamoto and Joint Special Design Team for Fusion DEMO https://doi.org/10.1088/1741-4326/ab7537 Nuclear Fusion
2019 EU Estimation of Tritium and Dust Source Term in European DEMOnstration Fusion Reactor During Accident Scenarios G. Mazzini, T. Kaliatka, M. T. Porfiri https://doi.org/10.1115/1.4043379 ASME Journal of Nuclear Egineering and Radiation Science
2019 EU Overview on recent progress in magnetron injection gun theory and design for high power gyrotrons I.Gr. Pagonakis, S. Alberti, K. Avramidis, F. Legrand, G. Gantenbein, J. Genoud, J.-P. Hogge, S. Illy, Z. Ioannidis, P. Kalaria, B. Piosczyk, S. Ruess, T. Ruess, T. Rzesnicki, M. Q. Tran, T.-M. Tran, M, Thumm, I. Vomvoridis, J. Jelonnek https://doi.org/10.1051/epjconf/201920304011 EPJ Web of Conferences
2019 EU Recent Status and Future Prospects of Coaxial-Cavity Gyrotron Development at KIT S. Illy, K. A. Avramidis, G. Gantenbein, Z. Ioannidis, J. Jin, P. C. Kalaria, I. Gr. Pagonakis, S. Ruess, T. Ruess, T. Rzesnicki, M. Thumm, J. Jelonnek https://doi.org/10.1051/epjconf/201920304005 EPJ Web of Conferences
2019 EU Theoretical Study on the Operation of the EU/KIT TE34,19-Mode Coaxial-Cavity Gyrotron at 170/204/238 GHz T. Ruess, K. Avramidis, G. Gantenbein, S. Illy, Z. Ioannidis, J. Jin, P. Kalaria, I. Gr. Pagonakis, S. Ruess, T. Rzesnicki, M. Thumm, J. Jelonnek https://doi.org/10.1051/epjconf/201920304014 EPJ Web of Conferences
2019 EU A conceptual system design study for an NBI beamline for the European DEMO C. Hopf, G. Starnella, N. den Harder, B. Heinemann, U. Fantz https://doi.org/10.1016/j.fusengdes.2019.01.060 Fusion Engineering and Design
2019 EU A multi-physics integrated approach to breeding blanket modelling and design G.A. Spagnuolo, P. Chiovaro, P. A. Di Maio, R. Favetti https://doi.org/10.1016/j.fusengdes.2019.03.131 Fusion Engineering and Design
2019 EU A new test method of AC loss assessment for fusion conductors P. Bruzzone, B. Stepanov, K. Sedlak https://doi.org/10.1016/j.fusengdes.2019.01.116 Fusion Engineering and Design
2019 EU A smart three-loop fuel cycle architecture for DEMO Chr. Day, B. Butler, T. Giegerich, B. Ploeckl, S. Varoutis https://doi.org/10.1016/j.fusengdes.2019.04.019 Fusion Engineering and Design
2019 EU Accident analysis with MELCOR-fusion code for DONES lithium loop and accelerator G. Dovidio, F. Martín-Fuertes https://doi.org/10.1016/j.fusengdes.2018.12.093 Fusion Engineering and Design
2019 EU Alternative design of DEMO Water Cooled Lithium Lead internal structure R. Mozzillo, A. Del Nevo, E. Martelli, G. Di Gironimo https://doi.org/10.1016/j.fusengdes.2019.02.001 Fusion Engineering and Design
2019 EU An enhanced, near-term HCPB design as driver blanket for the EU DEMO F.A. Hernandez, P. Pereslavtsev, G. Zhou, H. Neuberger, J. Rey, Q. Kang, L.V. Boccaccini, E. Bubelis, I. Moscato, D. Dongiovanni https://doi.org/10.1016/j.fusengdes.2019.02.037 Fusion Engineering and Design
2019 EU An overview of the EU breeding blanket design strategy as an integral part of the DEMO design effort G. Federici, L. Boccaccini, F. Cismondi, M. Gasparotto, Y. Poitevin, I. Ricapito, https://doi.org/10.1016/j.fusengdes.2019.01.141 Fusion Engineering and Design
2019 EU Analyses of the influence of the recycling coefficient on He confinement in DEMO reactor I. Ivanova-Stanik, M. Poradziński, R. Zagórski, M. Siccinio https://doi.org/10.1016/j.fusengdes.2019.03.091 Fusion Engineering and Design
2019 EU Characterization of ZAO® sintered getter material for use in fusion applications F. Siviero, L. Caruso , T. Porcelli, M. Mura, E. Maccallini, E. Sartori, M. Siragusa, C. Day, P. Sonato https://doi.org/10.1016/j.fusengdes.2019.03.026 Fusion Engineering and Design
2019 EU Chemistry and corrosion research and development for the water cooling circuits of European DEMO C. Harrington, A. Baron-Wiechec, R. Burrows, R. Holmes, R. Clark, S. Walters, T. Martin, R. Springell, J. Öijerholm, R. Becker https://doi.org/10.1016/j.fusengdes.2018.12.095 Fusion Engineering and Design
2019 EU Critical design issues in DEMO and solution strategies C. Bachmann, F. Cismondi, G. Federici, C. Gliss, G. Keech, F. Maviglia https://doi.org/10.1016/j.fusengdes.2018.12.013 Fusion Engineering and Design
2019 EU Deformation modeling of manipulators for DEMO using artificial neural networks M. Li, H. Wu, H. Handroos, R. Skilton, A. Loving https://doi.org/10.1016/j.fusengdes.2019.04.001 Fusion Engineering and Design
2019 EU DEMO Breeding Blanket Helium Cooled First Wall design investigation to cope high heat loads J. Aubert, G. Aiello, R. Boullon, F. Hernandez, J.-C. Jaboulay https://doi.org/10.1016/j.fusengdes.2019.01.009 Fusion Engineering and Design
2019 EU Design and analysis of the improved configuration of the secondary circuit for the EU-DEMO power plant L. Malinowski, M.Lewandowska, F.Giannetti https://doi.org/10.1016/j.fusengdes.2019.01.152 Fusion Engineering and Design
2019 EU Detailed structural analysis of a graded TF coil winding pack for EU DEMO I. Ivashov, A. Panin, W. Biel https://doi.org/10.1016/j.fusengdes.2019.01.016 Fusion Engineering and Design
2019 EU Development of a SIMMER¥RELAP5 coupling tool D. Martelli, B. Gonfiotti, S. K. Moghanaki, M. Eboli, G. Barone, A. Del Nevo https://doi.org/10.1016/j.fusengdes.2019.03.084 Fusion Engineering and Design
2019 EU Development of an electrochemical sensor for hydrogen detection in liquid lithium for IFMIF-DONES N. Holstein, W. Krauss, J. Konys, F.S. Nitti https://doi.org/10.1016/j.fusengdes.2019.02.100 Fusion Engineering and Design
2019 EU Development of self passivating W-Eurofer brazed joints M. Sanchez, J. de Prado, A. Calvo, C. García-Rosales, A. Ureña https://doi.org/10.1016/j.fusengdes.2019.03.041 Fusion Engineering and Design
2019 EU Development of W-monoblock divertor components with embedded thermal barrier interfaces A. Galatanu, M. Galatanu, M. Cioca, G. Ruiu, M. Enculescu, B. Popescu https://doi.org/10.1016/j.fusengdes.2019.02.074 Fusion Engineering and Design
2019 EU Diagnostics for plasma control – from ITER to DEMO W. Biel, R. Albanese, R. Ambrosino, M. Ariola, M.V. Berkel, I. Bolshakova, K.J. Brunner, R. Cavazzana, M. Cecconello, S. Conroy, A. Dinklage, I. Duran, R. Dux, T. Eade, S. Entler, G. Ericsson, E. Fable, D. Farina, L. Figini, C. Finotti, Th. Frankeg, L. Giacomelli, L. Giannone, W. Gonzalez, A. Hjalmarsson, M. Hron, F. Janky, A. Kallenbach, J. Kogoj, R. König, O. Kudlacek, R. Luis, A. Malaquias, O. Marchuk, G. Marchiori, M. Mattei, F. Mavigliac, G.De Masi, D. Mazon, H. Meister, K. Meyer, D. Micheletti, S. Nowak, Ch. Piron, A. Pironti, N. Rispoli, V. Rohde, G. Sergienko, S.El Shawish, M. Sicciniog, A. Silva, F.da Silva, C. Sozzi, M. Tardocchi, M. Tokar, W. Treutterer, H.Zohm https://doi.org/10.1016/j.fusengdes.2018.12.092 Fusion Engineering and Design
2019 EU Effect of neutral screening on pumping efficiency in the DEMO divertor S. Varoutis, Y. Igitkhanov, Chr. Day https://doi.org/10.1016/j.fusengdes.2019.03.029 Fusion Engineering and Design
2019 EU Electrochemical techniques as innovative tools for fabricating divertor and blanket components in fusion technology S.E. Wulf, J. Lorenz, N. Holstein, W. Krauss https://doi.org/10.1016/j.fusengdes.2018.12.091 Fusion Engineering and Design
2019 EU Electromagnetic analyses of single and double null configurations in DEMO device R. Albanese, R. Ambrosino, C. Bachmann, A. Castaldo, G. Federici, V.P. Loschiavo, M. Mattei, F. Maviglia, F. Villone https://doi.org/10.1016/j.fusengdes.2019.02.107 Fusion Engineering and Design
2019 EU Engineering and integration risks arising from advanced magnetic divertor configurations R. Kembleton, G. Federici, R. Ambrosino, F. Maviglia, M. Siccinio, H. Reimerdes https://doi.org/10.1016/j.fusengdes.2019.03.172 Fusion Engineering and Design
2019 EU Enhancements in the structural integrity assessment of plasma facing components P.M. Fursdon, M. Li, J.-H. You. https://doi.org/10.1016/j.fusengdes.2019.02.135 Fusion Engineering and Design
2019 EU Equatorial electron cyclotron port plug neutronic analyses for the EU DEMO A. Cufar, U. Fischer, T. Franke, G. ranucci,I.A. Kodeli, R. Villari https://doi.org/10.1016/j.fusengdes.2018.12.062 Fusion Engineering and Design
2019 EU EU DEMO safety and balance of plant design and operating requirements. Issues and possible solutions S. Ciattaglia, G. Federici, L. Barucca, R. Stieglitz, N. Taylor https://doi.org/10.1016/j.fusengdes.2019.03.149 Fusion Engineering and Design
2019 EU European Materials Development: Results and Perspective G. Pintsuk, E. Diegele, S.L. Dudarev, M. Gorley, J. Henry, J. Reiser, M. Rieth https://doi.org/10.1016/j.fusengdes.2019.02.063 Fusion Engineering and Design
2019 EU Evaluation of conservative and innovative manufacturing routes for gas cooled Test Blanket Module and Breeding Blanket First Walls H. Neuberger, J. Rey, F. Arbeiter, F. Hernandez, S. Ruck, C. Koehly, L. Stratil, R. Niewöhner, A. Felde https://doi.org/10.1016/j.fusengdes.2019.03.124 Fusion Engineering and Design
2019 EU Experimental activities for in-box LOCA of WCLL BB in LIFUS5/Mod3 facility M. Eboli, S. Khani Moghanaki, D. Martelli, N. Forgione, M. T. Porfiri, A. Del Nevo https://doi.org/10.1016/j.fusengdes.2019.01.113 Fusion Engineering and Design
2019 EU Experimental refutation of the deuterium permeability in vanadium, niobium and tantalum M. Malo, B. Garcinuño, D. Rapisarda https://doi.org/10.1016/j.fusengdes.2018.12.025 Fusion Engineering and Design
2019 EU Fabrication of thin-walled fusion blanket components like flow channel inserts by selective laser melting C. Koehly, H. Neuberger, L. Bühler https://doi.org/10.1016/j.fusengdes.2019.03.184 Fusion Engineering and Design
2019 EU Feasibility studies of DEMO potential waste recycling by proven existing industrial-scale processes L.Di Pace, T. Beone, A. Di Donato, P. Miceli, F. Macci, R. Piancaldini, E. Zanin https://doi.org/10.1016/j.fusengdes.2018.11.047 Fusion Engineering and Design
2019 EU High heat flux test results for a thermal break DEMO divertor target and subsequent design and manufacture development A. Lukenskas, T.R. Barrett, F. Domptail, M. Fursdon, F. Schoofs, H. Greuner, S. Roccella, E. Visca, F. Gallay, M. Richou, J.H. You https://doi.org/10.1016/j.fusengdes.2019.03.010 Fusion Engineering and Design
2019 EU High temperature microstructural stability of self-passivating W-Cr-Y alloys for blanket first wall application C. Garcia-Rosales, E. Sal Broco, A. Calvo, I. Iturriza, N. Ordás, J. Reiser https://doi.org/10.1016/j.fusengdes.2019.02.136 Fusion Engineering and Design
2019 EU Hydraulic analysis of EU-DEMO divertor plasma facing components cooling circuit under nominal operating scenarios P.A. Di Maio, S. Garitta, J.H. You, G. Mazzone, E. Vallone https://doi.org/10.1016/j.fusengdes.2019.03.030 Fusion Engineering and Design
2019 EU In-box LOCA accident analysis for the European DEMO water-cooled reactor M. D’Onorio, G. Caruso, F. Giannetti, M. T. Porfiri https://doi.org/10.1016/j.fusengdes.2019.01.066 Fusion Engineering and Design
2019 EU Industry supported improved design of DEMO BoP for HCPB BB concept with energy storage system E. Bubelis, W. Hering, S. Perez-Martin https://doi.org/10.1016/j.fusengdes.2019.03.183 Fusion Engineering and Design
2019 EU Initial configuration studies of the upper vertical port of the European DEMO C. Vorpahl, R. Mozzillo, C. Bachmann, G. Di Gironimo https://doi.org/10.1016/j.fusengdes.2019.04.021 Fusion Engineering and Design
2019 EU Initial integration concept of the DEMO lower horizontal port C. Gliss, R. Ambrosino, C. Bachmann, S. Ciattaglia, D. Flammini, T. Giegerich, S. Jimenez, A. Wilde https://doi.org/10.1016/j.fusengdes.2019.04.078 Fusion Engineering and Design
2019 EU Initial port integration concept for EC and NB systems in EU DEMO tokamak T. Franke, P. Agostinetti, C. Bachmann, A. Bruschi, M. Carr, F. Cismondi, A. Cufar, H.P.L. de Esch, G. Federici, N.Den Harder, S. Garavaglia, G. Grossetti, G. Granucci, A. Meakins, A. Moro, R. Mozzillo, E. Sartori, M. Siccinio, P. Sonato, D. Strauss, M. Q. Tran, A. Valentine, S. Zheng https://doi.org/10.1016/j.fusengdes.2019.03.007 Fusion Engineering and Design
2019 EU Interface and requirements analysis on the DEMO Heating and Current Drive system using Systems Engineering methodologies G. Grossetti, C. Baylard, T. Franke, J. Gafert, I. Jenkins, M. Siccinio, D. Strauß, M. Q. Tran, H. Zohm https://doi.org/10.1016/j.fusengdes.2019.03.107 Fusion Engineering and Design
2019 EU Issues of the vertical blanket segment architecture in DEMO: Current progress and resolution strategies G. Keech, G. Federici, C. Bachmann, C. Vorpahl, C. Gliss, T. Franke, F. Cismondi, S. Ciattaglia https://doi.org/10.1016/j.fusengdes.2019.02.029 Fusion Engineering and Design
2019 EU Materials development for new high heat-flux component mock-ups for DEMO J.W. Coenen, Y. Mao, S. Sistla, A.v. Mueller, G. Pintsuk, M. Wirtz, J. Riesch, T. Hoeschen, A. Terra, J-H. You, H. Greuner, A. Kreter, Ch. Broeckmann, R. Neu, Ch. Linsmeier https://doi.org/10.1016/j.fusengdes.2019.02.098 Fusion Engineering and Design
2019 EU Measurement of neutron fluence in the High-Flux Test Module of the Early Neutron Source by neutron activation A. Klix, F. Arbeiter, M. Majerle, M. Štefánik https://doi.org/10.1016/j.fusengdes.2019.02.053 Fusion Engineering and Design
2019 EU Methodology for Remote Handling Operations in IFMIF-DONES S. Coloma, M. Ferre, JM Cogollor, G. Miccichè https://doi.org/10.1016/j.fusengdes.2019.02.070 Fusion Engineering and Design
2019 EU MHD mixed convection flow in the WCLL: Heat transfer analysis and cooling system optimization A. Tassone, G. Caruso, F. Giannetti, A. Del Nevo https://doi.org/10.1016/j.fusengdes.2019.01.087 Fusion Engineering and Design
2019 EU Microstructural comparison of Oxide Dispersion Strengthened Fe-14Cr steels produced by HIP and SPS N. Ordas, D. Pazos, M. Suarez, A. Fernández, P. Fernández, I. Iturriza https://doi.org/10.1016/j.fusengdes.2019.03.182 Fusion Engineering and Design
2019 EU Multi-scale 3D modelling of a DEMO prototype cable from strand to full-size conductor based on X-ray tomography and image analysis I. Tiseanu, L. Muzzi, A. della Corte, V. Corato, A. Sima, D. Dumitru, C. Dobrea, T. Craciunescu, M. Lungu and I. Porosnicu https://doi.org/10.1016/j.fusengdes.2019.01.025 Fusion Engineering and Design
2019 EU Neutronics analyses for the bio-shield and liners of the IFMIF-DONES test cell Y. Qiu, F. Arbeiter, U. Fischer, K. Tian https://doi.org/10.1016/j.fusengdes.2019.01.064 Fusion Engineering and Design
2019 EU Neutronics of the IFMIF-DONES irradiation facility U. Fischer, B. Bienkowska, K. Drozdowicz, M. Frisoni, F. Mota, F. Ogando, Y. Qiu, G. Stankunas, G. Tracz https://doi.org/10.1016/j.fusengdes.2019.02.057 Fusion Engineering and Design
2019 EU Nuclear analyses of solid breeder blanket options for DEMO: Status, challenges and outlook P. Pereslavtsev, F.A.Hernández, G. Zhou, L. Lu, Ch. Wegmann, U. Fischer https://doi.org/10.1016/j.fusengdes.2019.01.023 Fusion Engineering and Design
2019 EU Numerical simulations of 3D magnetohydrodynamic flows in dual-coolant lead lithium blankets V. Klüber, C. Mistrangelo, L. Bühler https://doi.org/10.1016/j.fusengdes.2019.01.055 Fusion Engineering and Design
2019 EU Numerical study and experimental verification of protium permeation through Pd/Ag membranes for fusion applications R. Antunes, L. Frances, M. Incelli, A. Santucci https://doi.org/10.1016/j.fusengdes.2019.02.060 Fusion Engineering and Design
2019 EU Numerical study of conjugated heat transfer for DONES high flux test module S. Gordeev, F. Schwab, F. Arbeiter, Y. Qiu https://doi.org/10.1016/j.fusengdes.2019.01.035 Fusion Engineering and Design
2019 EU On the effects of the Double-Walled Tubes lay-out on the DEMO WCLL breeding blanket module thermal behavior R. Forte, P. Arena, A. Del Nevo, P.A. Di Maio https://doi.org/10.1016/j.fusengdes.2019.01.105 Fusion Engineering and Design
2019 EU Path planning and space occupation for remote maintenance operations of transportation in DEMO A. Vale, J. Dias https://doi.org/10.1016/j.fusengdes.2018.12.057 Fusion Engineering and Design
2019 EU Performance assessment of high heat flux W monoblock type target using thin graded and copper interlayers for application to DEMO divertor M. Richou, F. Gallay, A. Quet, M. Li, I. Chu, T. Loewenhoff, M. Lenci, H. Greuner, G. Kermouche, E. Meillot, G. Pintsuk, J. Reiser, E. Visca, and J.H. You https://doi.org/10.1016/j.fusengdes.2019.01.098 Fusion Engineering and Design
2019 EU Precipitation phenomena during corrosion testing in forced-convection Pb-15.7Li loop PICOLO W. Krauss, S.-E. Wulf, J. Lorenz, J. Konys https://doi.org/10.1016/j.fusengdes.2019.03.034 Fusion Engineering and Design
2019 EU Preliminary analysis on a maintainable test cell concept for IFMIF-DONES K. Tian, F. Arbeiter, M. Ascott, O. Crofts, G. McIntyre, G. Micciche, G. Mitchell, Y. Qiu, M. Tóth, A. Ibarra https://doi.org/10.1016/j.fusengdes.2019.01.007 Fusion Engineering and Design
2019 EU Preliminary CAD implementation of EU-DEMO primary heat transfer systems for HCPB breeding blanket option A. Tarallo, I. Moscato, E. Bubelis, L. Barucca https://doi.org/10.1016/j.fusengdes.2019.03.102 Fusion Engineering and Design
2019 EU Preliminary configuration of the torus vacuum pumping system installed in the DEMO lower port T. Giegerich; Chr. Day; C. Gliss; S. Jimenez; X. Luo; H. Strobel; A. Wilde https://doi.org/10.1016/j.fusengdes.2019.03.147 Fusion Engineering and Design
2019 EU Preliminary investigation on W foams as protection strategy for advanced FW PFCs R. De Luca, F. Maviglia, G. Federici, G Calabro, P. Fanelli, F. Vivioc https://doi.org/10.1016/j.fusengdes.2019.03.017 Fusion Engineering and Design
2019 EU Progress in high heat flux testing of European DEMO divertor mock-ups H. Greuner, B. Böswirth, T. R. Barrett, F. Crescenzi, F. Gallay, K. Hunger, M. Richou, E. Visca, A.v. Müller and J.H. You https://doi.org/10.1016/j.fusengdes.2018.12.021 Fusion Engineering and Design
2019 EU Progress in the design development of EU DEMO helium-cooled pebble bed primary heat transfer system I. Moscato, L. Barucca, S. Ciattaglia, F. D’Aleo, P.A. Di Maio, G. Federici, A. Tarallo https://doi.org/10.1016/j.fusengdes.2019.04.006 Fusion Engineering and Design
2019 EU Progress in the pre-conceptual CAD engineering of European DEMO divertor cassette D. Marzullo, C. Bachmann, D. Coccorese, G. Di Gironimo, P. Frosi, G. Mazzone, J.H. You https://doi.org/10.1016/j.fusengdes.2019.01.120 Fusion Engineering and Design
2019 EU Progress on an ion cyclotron range of frequency system for DEMO J.M. Noterdaeme, A. Messiaen, R. Ragona, W.Zhang, A.Bader, F. Durodié, U. Fischer, T. Franke, E. Smigelskis , J.Ongena, M.Q. Tran, D. Van Eester, M. Van Schoor https://doi.org/10.1016/j.fusengdes.2019.02.067 Fusion Engineering and Design
2019 EU Progress on the helium cooled Molten Lead Ceramic Breeder concept, as a near-term alternative blanket for EU DEMO G. Zhou, F.A.Hernández, Q. Kang, P. Pereslavtsev https://doi.org/10.1016/j.fusengdes.2019.01.151 Fusion Engineering and Design
2019 EU Prospects for the steady-state magnetic diagnostic based on antimony Hall sensors for future fusion power reactors S. Entler, I. Duran, M. Kocan, G. Vayakis, M. Kohout, J. Sebek, P. Sladek, O. Grover, K. Vyborny https://doi.org/10.1016/j.fusengdes.2019.01.013 Fusion Engineering and Design
2019 EU Rationale for the selection of the operating temperature of the DEMO vacuum vessel T Härtl, C.Bachmann, E.Diegele, G.Federici https://doi.org/10.1016/j.fusengdes.2019.02.014 Fusion Engineering and Design
2019 EU Recent achievements of the Pd-Ag membrane technologies in tritium extraction system applications A. Santucci, M. Incelli, R. Antunes, C. Espirito Santo, M.V. Ecclesia https://doi.org/10.1016/j.fusengdes.2019.03.162 Fusion Engineering and Design
2019 EU Recent progress in developing a feasible and integrated conceptual design of the WCLL BB in EUROfusion project A. Del Nevo, P. Arena, G. Caruso, P. Chiovaro, P.A. Di Maio, M. Eboli, F. Edemetti, N. Forgione, R.Forte, A. Froio, F. Giannetti, G. Di Gironimo, K. Jiang, S. Liu, F. Moro, R. Mozzillo, L. Savoldi, A. Tarallo, M. Tarantino, A. Tassone, M. Utili, R. Villari, R. Zanino, E. Martelli https://doi.org/10.1016/j.fusengdes.2019.03.040 Fusion Engineering and Design
2019 EU Reconstructing JET using LIDAR-Vision fusion E.T. Jonasson, R. Skilton, S. Kyberd, J. Boeuf, P. Amayo, G. Burroughes, S. Collins https://doi.org/10.1016/j.fusengdes.2019.03.069 Fusion Engineering and Design
2019 EU Rescue and recovery studies for the DEMO blanket transporter S. Budden, A. Barturen, V. Agudo, J. Keep, G. Keech, A. Loving, P. Shaughnessy https://doi.org/10.1016/j.fusengdes.2019.04.026 Fusion Engineering and Design
2019 EU Safety and Environment studies for a European DEMO design concept N. Taylor, S. Ciattaglia, D. Coombs, X. Zhou Jin, J. Johnston, K. Liger, G. Mazzini, J. Carlos Mora, T. Pinna, M. Teresa Porfiri, E. Urbanovicius, R. Vale, A. Widdowson https://doi.org/10.1016/j.fusengdes.2018.11.049 Fusion Engineering and Design
2019 EU Sensitivity of fast ion losses to magnetic perturbations in the European DEMO J. Varje, T. Kurki-Suonio, A. Snicker, K. Särkimäki, P. Vincenzi https://doi.org/10.1016/j.fusengdes.2019.03.001 Fusion Engineering and Design
2019 EU Simulation of magnetic control of the plasma shape on the DEMO tokamak M. Ariola, A. Pironti, R. Ambrosino, M. Mattei, W. Biel, T. Franke https://doi.org/10.1016/j.fusengdes.2019.01.065 Fusion Engineering and Design
2019 EU Status of Pb-16Li technologies for European DEMO fusion reactor M. Utili, S.Bassini, L. Boccaccini, L. Bühler, F. Cismondi, A. Del Nevo, M. Eboli, F. DiFonzo, T. Hernandez, S. Wulf, M. Kordač, D. Martelli, E. Mas De les Valls, T. Melichar, C. Mistrangelo, M. Tarantino, A. Tincani, L. Vála https://doi.org/10.1016/j.fusengdes.2019.04.083 Fusion Engineering and Design
2019 EU Structural verification and manufacturing procedures of the cooling system, for DEMO divertor target (OVT) G. Mazzone, J.H. You, V. Cerri, D. Coccorese, S. Garitta, G. Di Gironimo, D. Marzullo, P. A. Di Maio, E. Vallone, A. Tincani, U. Bonavolontà, V. Imbriani https://doi.org/10.1016/j.fusengdes.2019.02.139 Fusion Engineering and Design
2019 EU Sublimation of advanced tungsten alloys under DEMO relevant accidental conditions F. Klein, A. Litnovsky, T. Wegener, M. Rasinski, J. Schmitz, X. Y. Tan, J. W. Coenen, Ch. Linsmeier, J. Gonzalez-Julian, M. Bram, H. Du, and J. Mayer https://doi.org/10.1016/j.fusengdes.2019.02.039 Fusion Engineering and Design
2019 EU Systems engineering activities supporting the heating & current drive and fuelling lines systems integration in the European DEMO breeding blanket G. Bongiovì, G.A. Spagnuolo, I.A. Maione, F. Cismondi, A.Del Nevo, F. Hernandez, D. Rapisarda, R. Mozzillo https://doi.org/10.1016/j.fusengdes.2019.111265 Fusion Engineering and Design
2019 EU Testing of ceramic membranes for PEG separation and preliminary design of a membrane cascade S. Tosti, G. Bruni, D. De Meis, M. Sansovini https://doi.org/10.1016/j.fusengdes.2019.03.013 Fusion Engineering and Design
2019 EU The CIEMAT LiPb Loop Permeation Experiment D. Rapisarda, B. Garcinuño, I. Fernández-Berceruelo, E. Carella https://doi.org/10.1016/j.fusengdes.2019.02.045 Fusion Engineering and Design
2019 EU The DEMO Helium Cooled Lithium Lead “advanced-plus” Breeding Blanket: Design improvement and FEM studies R. Boullon, J. Aubert, G. Aiello, J-C. Jaboulay, A. Morin https://doi.org/10.1016/j.fusengdes.2019.03.092 Fusion Engineering and Design
2019 EU The design of the DONES lithium target system P. Arena, D. Bernardi, M. Frisoni, A. Ibarra, P.A. Di Maio, G. Micciche’, F.S. Nitti https://doi.org/10.1016/j.fusengdes.2019.02.024 Fusion Engineering and Design
2019 EU The remote handling system of IFMIF-DONES G. Micciche, M. Ascott, A. Bakic, D. Bernardi, J. Brenosa, S. Coloma , O. Crofts , G. Diginonimo, M. Ferre, G. Fisher, A. Ibarra,A. Karap, I. Kiss, C. Kunert, L. Lorenzelli, G. Mitchell, M. Mittwollen,J. Ollerich, P. Pagani, S. Papa, G. Porempovics, T. Tonci, M. Toth https://doi.org/10.1016/j.fusengdes.2019.01.112 Fusion Engineering and Design
2019 EU Thermal-hydraulic modeling and analyses of the water-cooled EU DEMO using RELAP5 system code E. Martelli, F. Giannetti, C. Ciurluini, G. Caruso, A.Del Nevo https://doi.org/10.1016/j.fusengdes.2019.02.021 Fusion Engineering and Design
2019 EU Thermophysical and mechanical properties of W-Cu laminates produced by FAST joining A. Galatanu, M. Galatanu, M. Enculescu, J. Reisner, S. Sickinger https://doi.org/10.1016/j.fusengdes.2019.03.193 Fusion Engineering and Design
2019 EU Towards reliable design-by-analysis for divertor plasma facing components – Guidelines for inelastic assessment (part 1: Unirradiated) M. Fursdon, M. Li, J.H. You https://doi.org/10.1016/j.fusengdes.2019.06.007 Fusion Engineering and Design
2019 EU Towards the EU fusion-oriented neutron source: The preliminary engineering design of IFMIF-DONES D. Bernardi, F. Arbeiter, M. Cappelli, U. Fischer, A. García, R. Heidinger, W. Krolas, F. Martin-Fuertes, G. Micciche’, A. Muñoz, F.S. Nitti, M. Pérez, T. Pinna, K. Tian, A. Ibarra https://doi.org/10.1016/j.fusengdes.2018.12.042 Fusion Engineering and Design
2019 EU Tritium and dust source term inventory evaluation issues in the European DEMO reactor concepts G. Mazzini, T. Kaliatka, M. T. Porfiri https://doi.org/10.1016/j.fusengdes.2019.01.008 Fusion Engineering and Design
2019 EU Ultrasonic analysis of tungsten monoblock divertor mock-ups after high heat flux test G. Dose, S. Roccella, M. Richou, F. Gallay, E. Visca, H. Greuner, F. Romanelli, K. Hunger, T. Barrett, J.H. You https://doi.org/10.1016/j.fusengdes.2019.01.102 Fusion Engineering and Design
2019 EU Validation and sensitivity of CFETR design using EU systems codes J Morris, M. Y. Ye, S. Mao https://doi.org/10.1016/j.fusengdes.2019.01.026 Fusion Engineering and Design
2019 EU Validation of SIMMER-III code for in-box LOCA of WCLL BB: Pre-test numerical analysis of Test D1.1 in LIFUS5/Mod3 facility S. Khani Moghanaki, M.Eboli, N.Forgione, D.Martelli, A.Del Nevo https://doi.org/10.1016/j.fusengdes.2019.01.131 Fusion Engineering and Design
2019 JA Development of a water-cooled blanket concept with pressure tightness against in-box LOCA for JA DEMO Y. Someya, H. Kudo, K. Tobita, R. Hiwatari, Y. Sakamoto and Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2019.01.107 Fusion Engineering and Design
2019 JA Development of plant concept related to tritium handling in the water-cooling system for JA DEMO R. Hiwatari, K. Katayama, M. Nakamura, Y. Miyoshi, A. Aoki, N. Asakura, H. Utoh, Y. Homma, S. Tokunaga, N. Nakajima, Y. Someya, Y. Sakamoto, K. Tobita, Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2019.03.174 Fusion Engineering and Design
2019 JA Li-rod structure in high-temperature gas-cooled reactor as a tritium production device for fusion reactors H. Matsuura, R. Okamoto, Y. Koga, T. Suganuma, K. Katayama, T. Otsuka, M. Goto, S. Nakagawa, E. Ishitsuka, K. Tobita https://doi.org/10.1016/j.fusengdes.2019.02.009 Fusion Engineering and Design
2019 JA Oxide layer formation in reduced activation ferritic steel F82H under DEMO reactor blanket condition K. Kimura, J. Mochizuki, S. Horikoshi, M. Matsunaga, H. Fujita, K. Okitsu, T. Tanaka, Y. Hishinuma, Y. Sakamoto, Y. Someya, H. Nakamura, T. Chikada, The joint Special Design Team for DEMO https://doi.org/10.1016/j.fusengdes.2019.02.129 Fusion Engineering and Design
2019 JA Progress on reliability of remote maintenance concept for JA DEMO H. Utoh, S. Kakudate, R. Hiwatari, Y. Someya, Y. Sakamoto, N.Asakura, S. Tokunaga, K. Tobita, Joint Special Design Team for Fusion Demo https://doi.org/10.1016/j.fusengdes.2019.02.133 Fusion Engineering and Design
2019 JA Surface oxidation effect on deuterium permeation in reduced activation ferritic/martensitic steel F82H for DEMO application T. Chikada, K. Kimura, J. Mochizuki, S. Horikoshi, M. Matsunaga, H. Fujita, K. Okitsu, T. Tanaka, Y. Hishinuma, Y. Sakamoto, Y. Someya, H. Nakamura, The Joint Special Design Team for DEMO https://doi.org/10.1016/j.fusengdes.2018.12.089 Fusion Engineering and Design
2019 EU Advancements in the Helium-Cooled Pebble Bed Breeding Blanket for the EU DEMO: Holistic Design Approach and Lessons Learned F.A. Hernández, P. Pereslavtsev, G. Zhou, B. Kiss, Q. Kang, H. Neuberger, V. Chakin, R. Gaisin, P. Vladimirov, L.V. Boccaccini, G.A. Spagnuolo, S. D’Amico & I. Moscato https://doi.org/10.1080/15361055.2019.1607695 Fusion Science and Technology
2019 EU Design of a Test Section to Analyze Magneto-Convection Effects in WCLL Blankets C. Koehly, L. Bühler, C. Mistrangelo https://doi.org/10.1080/15361055.2019.1607705 Fusion Science and Technology
2019 EU Design of Two Experimental Mock-Ups as Proof-of-Concept and Validation Test Rigs for the Enhanced EU DEMO HCPB Blanket G. Zhou, B.-E. Ghidersa, F.A. Hernández, Q. Kang, H. Neuberger https://doi.org/10.1080/15361055.2019.1629247 Fusion Science and Technology
2019 EU Identification of the Postulated Initiating Events of Accidents Occurring in a Toroidal Field Magnet of the EU DEMO R. Bonifetto, N. Pedroni, L. Savoldi, R. Zanino https://doi.org/10.1080/15361055.2019.1602398 Fusion Science and Technology
2019 JA Japan’s Efforts to Develop the Concept of JA DEMO During the Past Decade K. Tobita, R. Hiwatari, Y. Sakamoto, Y. Someya, N. Asakura, H. Utoh, Y. Miyoshi, S. Tokunaga, Y. Homma, N. Nakajima and the Joint Special Design Team for Fusion DEMO https://doi.org/10.1080/15361055.2019.1600931 Fusion Science and Technology
2019 EU Modeling the ITER CS AC losses based on the CS insert analysis R. Bonifetto, M. Bianchi, M. Breschi, A. Brighenti, N. Martovetsky, L. Savoldi, R. Zanino https://doi.org/10.1109/TASC.2019.2903626 IEEE Transactions on Applied Superconductivity
2019 EU Quench Analysis of the HTS CrossConductor for a Toroidal Field Coil R. Heller, P. Blanchier, W.H. Fietz, M.J. Wolf https://doi.org/10.1109/TASC.2019.2917154 IEEE Transactions on Applied Superconductivity
2019 EU Pre-conceptual study of the European DEMO neutron diagnostics M. Cecconello, S. Conroy, G. Ericsson, A. Hjalmarsson, T. Franke and W. Biel https://doi.org/10.1088/1748-0221/14/09/C09001 Journal of Instrumentation
2019 JA An Analysis of Japan’s Long-Term Energy Systems Reflecting Fusion Energy Development Roadmap by Using a Global Energy Systems Model K. Gi , F. Sano , K. Akimoto , R. Hiwatari, K. Tobita https://doi.org/10.24778/jjser.40.5_170 Journal of Japan Society of Energy and Resources
2019 JA Conceptual design of Japan’s fusion DEMO reactor (JADEMO) and superconducting coil issues K. Tobita, H. Utoh, R. Hiwatari, Y. Miyoshi, S. Tokunaga, Y. Sakamoto, Y. Someya, N. Asakura, Y. Homma, N. Nakajima and the Joint Special Design Team for Fusion DEMO https://doi.org/10.1088/1742-6596/1293/1/012078 Journal of Physics: Conference Series
2019 EU EU approach to the fusion-like neutron source: The DONES Project, present status and other applications A. Ibarra, F. Arbeiter, D. Bernardi, J. Castellanos, W. Krolas, M. Cappelli, U. Fischer, R. Heidinger, F. Martin-Fuertes, G. Micciché, A. Muñoz, F. S. Nitti, T. Pinna, J. Quiñones https://doi.org/10.1088/1741-4326/ab0d57 Nuclear Fusion
2019 EU Figure of merit for divertor protection in the preliminary design of the EU-DEMO reactor M. Siccinio, G. Federici, R. Kembleton, H. Lux, F. Maviglia and J. Morris https://doi.org/10.1088/1741-4326/ab3153 Nuclear Fusion
2019 EU Implications of uncertainties on European DEMO design H. Lux, M. Siccinio, W. Biel, G. Federici, R. Kembleton, A.W. Morris, E. Patelli and H. Zohm https://doi.org/10.1088/1741-4326/ab13e2 Nuclear Fusion
2019 EU Overview of recent gyrotron R&D towards DEMO within EUROfusion Work Package Heating and Current Drive K. A. Avramidis, G. Aiello, S. Alberti, P.T. Brücker, A. Bruschi, J. Chelis, T. Franke, G. Gantenbein, S. Garavaglia, J. Genoud, M. George, G. Granucci, G. Grossetti, J.-P. Hogge, S. Illy, Z. C. Ioannidis, J. Jelonnek, J. Jin, P. C. Kalaria, G. P. Latsas, A. Marek, I. Gr. Pagonakis, D. V. Peponis, S. Ruess, T. Ruess, T. Rzesnicki, T. Scherer, M. Schmid, D. Strauss, M. Thumm, J. Tigelis, M. Q. Tran, C. Wu, A. Zein, A. Zisis https://doi.org/10.1088/1741-4326/ab12f9 Nuclear Fusion
2019 EU Overview of the DEMO Staged Design Approach in Europe G. Federici, C. Bachmann, L. Barucca, C. Baylard, W. Biel, L.V. Boccaccini, C. Bustreo, S. Ciattaglia, F. Cismondi, V. Corato, C. Day, E. Diegele, T. Franke, E. Gaio, C. Gliss, T. Haertl, A. Ibarra, J. Holden, G. Keech, R. Kembleton,, A. Loving, F. Maviglia, J. Morris, B. Meszaros, I. Moscato, G. Pintsuk, M. Siccinio, N. Taylor, M.Q Tran, C. Vorpahl, H. Walden, J.H. You https://doi.org/10.1088/1741-4326/ab1178 Nuclear Fusion
2019 EU The European approach to the fusion-like neutron source: The IFMIF-DONES Project A. Ibarra, M. Pérez, F. Arbeiter, D. Bernardi, A. García, W. Krolas, M. Capelli, U. Fischer, R. Heidinger, D. et al. https://doi.org/10.1088/1741-4326/ab0d57 Nuclear Fusion
2019 EU Waste implications from minor impurities in European DEMO materials M.R. Gilbert, T. Eade, C. Bachmann, U. Fischer, N. Taylor https://doi.org/10.1088/1741-4326/ab154e Nuclear Fusion
2019 EU Additive manufacturing of pure tungsten by means of selective laser beam melting with substrate preheating temperatures up to 1000 °C A. von Mueller, G. Schlick, R. Neu, C. Anstaett, T. Klimkait, J. Lee, B. Pascher, M. Schmitt, C. Seidel https://doi.org/10.1016/j.nme.2019.02.034 Nuclear Materials and Energy
2019 EU Assessment of the 3D geometrical effects on the DEMO divertor pumping efficiency S. Varoutis, Yu. Igitkhanov, Chr. Day https://doi.org/10.1016/j.nme.2019.02.021 Nuclear Materials and Energy
2019 EU Development of innovative materials and thermal treatments for DEMO water cooled blanket L. Pilloni, C. Cristalli, O. Tassa, L. Bozzetto, E. Zanin, N. Bettocchi https://doi.org/10.1016/j.nme.2019.01.026 Nuclear Materials and Energy
2019 JA A Fast Discharge Scheme of Toroidal Field Coils for Fusion Demo Reactors Y. Itoh, H. Utoh, Y. Sakamoto, R. Hiwatari, and Joint Special Design Team for Fusion DEMO https://doi.org/10.1585/pfr.14.1405167 Plasma and Fusion Research
2019 JA Assessment on tokamak fusion power plant to contribute to global climate stabilization in the framework of Paris Agreement R. Hiwatari, T. Goto and Joint Special Design Team for Fusion DEMO https://doi.org/10.1585/pfr.14.1305047 Plasma and Fusion Research
2018 EU Cyclic plastic behavior of unidirectional SiC fibre-reinforced copper composites under uniaxial loads: An experimental and computational study S. Kimmig, J.H. You https://doi.org/10.1016/j.compstruct.2018.06.012 Composite Structures
2018 JA An extended kinetic model for the thermal force on impurity particles in weakly collisional plasmas Y. Homma, K. Hoshino, S. Tokunaga, S. Yamoto, A. Hatayama, N. Asakura, Y. Sakamoto, K. Tobita and Joint Special Design Team for Fusio DEMO https://doi.org/10.1002/ctpp.201700173 Contributions to Plasma Physics
2018 EU A hybrid analysis procedure enabling elastic design rule assessment of monoblock-type divertor components M. Fursdon, J.-H. You, T. Barrett, M. Li https://doi.org/10.1016/j.fusengdes.2018.07.014 Fusion Engineering and Design
2018 EU Analysis of the EU-DEMO fuel cycle elements: Intrinsic impact of technology choices Y. Hörstensmeyer, B. Butler, Chr. Day, F. Franza https://doi.org/10.1016/j.fusengdes.2018.02.015 Fusion Engineering and Design
2018 EU Assessment of Activated Corrosion Products for the DEMO WCLL L. Di Pace, L. Quintieri https://doi.org/10.1016/j.fusengdes.2018.04.095 Fusion Engineering and Design
2018 EU BB LOCA analysis for reference design of the EU DEMO HCPB blanket concept X.Z. Jin https://doi.org/10.1016/j.fusengdes.2018.04.046 Fusion Engineering and Design
2018 EU Computational thermofluid-dynamic analysis of DEMO divertor cassette body cooling circuit P.A. Di Maio, S. Garitta, J.H. You, G. Mazzone, E. Vallone https://doi.org/10.1016/j.fusengdes.2018.05.063 Fusion Engineering and Design
2018 EU Definition of the Q-PETE experiment for investigation of hydrogen isotopes permeation through the metal structures of a DEMO HCPB breeder zone D. Klimenko, F. Arbeiter, V. Pasler, G. Schlindwein, A. von der Weth, K. Zinn https://doi.org/10.1016/j.fusengdes.2018.03.024 Fusion Engineering and Design
2018 EU DEMO design activity in Europe: Progress and updates G. Federici, C. Bachmann, L. Barucca, W. Biel, L. Boccaccini. R. Brown, C. Bustreo, S. Ciattaglia, F. Cismondi, M. Coleman, V. Corato. C. Day. E. Diegele, U. Fischer, T. Franke, C. Gliss, A. Ibarra, R. Kembleton, A. Loving, F. Maviglia, B. Meszaros, G. Pintsuk, N. Taylor, M.Q. Tran, C. Vorpahl, R. Wenninger, J.H.You https://doi.org/10.1016/j.fusengdes.2018.04.001 Fusion Engineering and Design
2018 EU DEMO design using the SYCOMORE systems code: influence of technology constraints on the reactor performance C. Reux, S. Kahn, L. Zani, B. Pégourié, N. Piot, M. Owsiak, G.Aiello, J.-F. Artaud, A. Boutry, S. Dardour, L.Di Gallo, J.-L. Duchateau, D. Galassia, F. Imbeaux, J.-C. Jaboulay, P. Magaud, J. Said, B. Saoutic, P. Sardain https://doi.org/10.1016/j.fusengdes.2018.05.059 Fusion Engineering and Design
2018 EU Development and validation of the blanket First Wall mock-up model in RELAP5-3D V. Di Marcello, B.-E. Ghiders, X.Z. Jin, A. Abou-Sen, R. Stieglitz https://doi.org/10.1016/j.fusengdes.2018.05.050 Fusion Engineering and Design
2018 EU Development of EUROFER97 database and material property handbook E. Gaganidze, F. Gillemot, I. Szenthe, M. Gorley, M. Rieth, E. Diegele https://doi.org/10.1016/j.fusengdes.2018.06.027 Fusion Engineering and Design
2018 EU Discrete element method for effective thermal conductivity of packed pebbles accounting for the Smoluchowski effect M. Moscardini, Y. Gan, S. Pupeschi, M. Kamlah https://doi.org/10.1016/j.fusengdes.2018.01.013 Fusion Engineering and Design
2018 EU EU DEMO EC system preliminary conceptual design S. Garavaglia, G. Aiello, S. Alberti, K. Avramidis, A. Bruschi, I.G. Chelis, J. Franck, G. Gantenbein, G. Granucci, G. Grossetti, K. Hizanidis, S. Illy, J. Jelonnek, P. Kalaria, G. Latsas, A. Moro, I. Pagonakis, D.V.Peponis, E. Poli, N. Rispoli, S. Ruess, T. Rzesnicki, T. Scherer, D. Strauss, M. Thumm, I. Tigelis, C. Tsironis, C. Wu, T. Frankef, M.Q. Trand https://doi.org/10.1016/j.fusengdes.2018.04.097 Fusion Engineering and Design
2018 EU Exploring a broad spectrum of design options for DEMO R. Kemp, R. Wenninger, G. Federici, H. Reimerdes, R. Ambrosino, R. Brown, M. Coleman https://doi.org/10.1016/j.fusengdes.2018.04.049 Fusion Engineering and Design
2018 EU FEM and thermal fatigue testing comparison of ITER-like divertor PFUs mock-ups for DEMO F. Crescenzi, E. Cacciotti, V. Cerri, H. Greuner, S. Roccella, E. Visca, J.H. You https://doi.org/10.1016/j.fusengdes.2018.03.023 Fusion Engineering and Design
2018 EU Initial layout of DEMO buildings and configuration of the main plant systems C. Gliss, S. Ciattaglia, W. Korn, I. Moscato https://doi.org/10.1016/j.fusengdes.2018.02.101 Fusion Engineering and Design
2018 EU Laser cutting and welding tools for use in-bore on EU DEMO service pipes K. Keogh, S. Kirk, W. Suder, I. Farquhar, T. Tremethick, A.Loving https://doi.org/10.1016/j.fusengdes.2018.02.098 Fusion Engineering and Design
2018 EU Manufacturing and testing of ITER-like divertor plasma facing mock-ups for DEMO E. Visca, B. Böswirth, E. Cacciotti, V. Cerri, F. Crescenzi, F. Gallay, H. Greuner, Reale, M. Richou, S. Roccella, J.H. You, F. Maviglia https://doi.org/10.1016/j.fusengdes.2018.05.064 Fusion Engineering and Design
2018 EU Materials engineering and design for fusion – Towards DEMO design criteria M. Gorley, E. Diegele, S. Dudarev, G. Pintsuk https://doi.org/10.1016/j.fusengdes.2018.02.012 Fusion Engineering and Design
2018 EU Metal Foil Pump performance aspects in view of the implementation of Direct Internal Recycling for future fusion fuel cycles B.J. Peters, S. Hanke, Chr. Day https://doi.org/10.1016/j.fusengdes.2018.05.036 Fusion Engineering and Design
2018 EU Modelling an in-vessel loss of coolant accident in the EU DEMO WCLL breeding blanket with the GETTHEM code A. Froio, A. Bertinetti, S. Ciattaglia, F. Cismondi, L. Savoldi, R. Zanino https://doi.org/10.1016/j.fusengdes.2018.04.106 Fusion Engineering and Design
2018 EU On the thermal-hydraulic optimization of DEMO divertor plasma facing components cooling circuit P.A. Di Maio, S. Garitta, J.H. You, G. Mazzone, E. Vallone https://doi.org/10.1016/j.fusengdes.2018.05.032 Fusion Engineering and Design
2018 EU Overview over DEMO design integration challenges and their impact on component design concepts C. Bachmann, S. Ciattaglia, F. Cismondi, T. Eade, G. Federici, U. Fischer, T. Franke, C. Gliss, F. Hernandez, J. Keep, M. Loughlin, F. Maviglia, F. Moro, J. Morris, P. Pereslavtsev, N. Taylor, Z. Vizvary, R.Wenninger https://doi.org/10.1016/j.fusengdes.2017.12.040 Fusion Engineering and Design
2018 EU Plasma physics for fusion reactor system codes: Framework and model code E. Fable, C. Angioni, M. Siccinio, H. Zohm https://doi.org/10.1016/j.fusengdes.2018.03.061 Fusion Engineering and Design
2018 EU Preliminary design of EU DEMO helium-cooled breeding blanket primary heat transfer system I. Moscato, L. Barucca, S. Ciattaglia, P.A.Di Maio, G.Federici https://doi.org/10.1016/j.fusengdes.2018.05.058 Fusion Engineering and Design
2018 EU Progress in EU Breeding Blanket design and integration F. Cismondi, L.V. Boccaccini, G. Aiello, J. Aubert, C. Bachmann, T. Barrett, L. Barucca, E.Bubelis, S. Ciattaglia, A.Del Nevo, E. Diegele, M. Gasparotto, G.Di Gironimo, P.A.Di Maio, F. Hernandez, G. Federici, I.F. Berceruelo, T. Franke, A. Froio, C. Gliss, J. Keep, A. Loving, E. Martelli, F. Maviglia, I. Moscato, R. Mozzillo, Y. Poitevin, D. Rapisarda, L. Savoldi, A. Tarallo, M.Utili, L. Vala, G. Veres, R.Zanino https://doi.org/10.1016/j.fusengdes.2018.04.009 Fusion Engineering and Design
2018 EU Progress in the design of the superconducting magnets for the EU DEMO V. Corato, T. Bagni, M.E. Biancolini, R. Bonifetto, P. Bruzzone, N. Bykovsky, D. Ciazynski, M. Colemang, A.della Corte, A. Dembkowska, A.Di Zenobio, M. Eisterer, W.H. Fietz, D.X. Fischer, E. Gaio, L. Giannini, F. Giorgetti, R. Heller, I. Ivashov, B. Lacroix, M. Lewandowska, A. Maistrello, L. Morici, L. Muzzi, A. Nijhuis, F. Nunio, A. Panin, X. Sarasola, L. Savoldi, K. Sedlak, B. Stepanov, G. Tomassetti, A. Torre, S. Turtù, D. Uglietti, R. Vallcorba, K.-P. Weiss, R. Wesche, M.J. Wolf, K. Yagotintsev, L. Zani, R.Zanino https://doi.org/10.1016/j.fusengdes.2018.05.065 Fusion Engineering and Design
2018 EU Simulations and pre-experiment uncertainty analyses for a hydrogen diffusion experiment using a “two side purged membrane” setup F. Arbeiter, D. Klimenko, C. Klein, G. Schlindwein, V. Pasler, A. von der Weth https://doi.org/10.1016/j.fusengdes.2018.02.010 Fusion Engineering and Design
2018 EU Smart first wall materials for intrinsic safety of a fusion power plant A. Litnovsky, F. Klein, J. Schmitz, T. Wegener, Ch. Linsmeier, M.R. Gilbert, M. Rasinski, A. kreter, X. Tan, Y. Mao, J.W. Coenen, M. bram, J. Gonzalez-Julian https://doi.org/10.1016/j.fusengdes.2018.04.028 Fusion Engineering and Design
2018 EU Status of EU DEMO Heat Transport and Power Conversion Systems L. Barucca, S. Ciattaglia, M. Chantant, A. Del Nevo, W. Hering, E. Martelli, I. Moscato https://doi.org/10.1016/j.fusengdes.2018.05.057 Fusion Engineering and Design
2018 EU Structural assessment of the HCPB breeding blanket segments in the EU DEMO reactor under normal operation and a central plasma disruption C. Zeile, F.A. Hernández, I.A. Maione, G. Zhou, C. Bachmann https://doi.org/10.1016/j.fusengdes.2018.02.024 Fusion Engineering and Design
2018 EU Study of EU DEMO WCLL Breeding Blanket and Primary Heat Transfer System Integration E. Martelli, F. Giannett, G. Caruso, A. Tarallo, M. Polidori, L. Barucca, A. Del Nevo https://doi.org/10.1016/j.fusengdes.2018.04.016 Fusion Engineering and Design
2018 EU Systems engineering perspective to the integration of the heating and current drive system in the EU DEMO: Analysis of requirements and functions G. Grossetti, R. Brown, T. Franke, J. Gafert, T. Galliara, I. Jenkins, N. Mantel, D. Strauß, M. Q. Tran, R. Wenninger https://doi.org/10.1016/j.fusengdes.2017.12.023 Fusion Engineering and Design
2018 EU Technology developments for a beam source of an NNBI system for DEMO U. Fantz, C. Hopf, R. Friedl, S. Cristofaro, B. Heinemann, S. Lishev, A. Mimo https://doi.org/10.1016/j.fusengdes.2018.02.025 Fusion Engineering and Design
2018 EU Tritium breeding performance of a DEMO based on the Double Null divertor configuration P. Pereslavtsev, U. Fischer, L. Lu, C. Bachmann, G. Federici, F. Maviglia https://doi.org/10.1016/j.fusengdes.2018.02.009 Fusion Engineering and Design
2018 EU Wall protection strategies for DEMO plasma transients F. Maviglia, R. Albanese, R. Ambrosino, W. Arter, C. Bachmann, T. Barrett, G. Federici, M. Firdaous, J. Gerardin, M. Kovari, V. Loschiavo, M. Mattei, F. Villone, R. Wenninger https://doi.org/10.1016/j.fusengdes.2018.02.064 Fusion Engineering and Design
2018 EU Waste assessment of European DEMO fusion reactor designs M.R. Gilbert, T. Eade, C. Bachmann, U. Fischer, N.P.Taylor https://doi.org/10.1016/j.fusengdes.2017.12.019 Fusion Engineering and Design
2018 EU&JA Plasma exhaust and divertor studies in Japan and Europe broader approach, DEMO design activity N. Asakura, K. Hoshino, H. Utoh, Y. Someya, S. Suzuki, C. Bachmann, H. Reimerdes, R. Wenninger, H. Kudo, S. Tokunaga, Y. Homma, Y. Sakamoto, R. Hiwatari, K. Tobita, J.-H. You, G. Federici, K. Ezato, Y. Seki, Y. Ueda, N. Ohno https://doi.org/10.1016/j.fusengdes.2018.04.104 Fusion Engineering and Design
2018 EU&JA Studies of the plasma vertical instability and its stabilized concepts in JA and EU broader approach, DEMO design activity H. Utoh, S. Tokunaga, N. Asakura, Y. Sakamoto, Y. Someya, R. Hiwatari, K. Tobita, G. Federici, R. Wenninger, F. Maviglia, R. Albanese, R. Ambrosino, M. Mattei, F. Villone https://doi.org/10.1016/j.fusengdes.2018.04.026 Fusion Engineering and Design
2018 JA Cooling water system design of Japan’s DEMO for fusion power production Y. Miyoshi, A. Aoki, R. Hiwatari, Y. Someya, Y. Sakamoto, K. Tobita, The Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2017.11.013 Fusion Engineering and Design
2018 JA Evaluation of tritium leakage rate into seawater in fusion DEMO cooling water system Y. Miyoshi, A. Aoki, R. Hiwatari, Y. Sakamoto, K. Tobita, the Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2018.05.060 Fusion Engineering and Design
2018 JA Fusion DEMO reactor design based on nuclear analysis Y. Someya, K. Tobita, R. Hiwatari, Y. Sakamoto, the Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2018.04.129 Fusion Engineering and Design
2018 JA Modeling of chemical reactions of beryllium/beryllide pebbles with steam for hydrogen safety design of water-cooled DEMO M.M. Nakamura, J.H. Kim, M. Nakamichi, Y. Someya, K. Tobita, Y. Sakamoto, R. Hiwatari, Joint Special Design Team for Fusion Demo https://doi.org/10.1016/j.fusengdes.2018.05.039 Fusion Engineering and Design
2018 JA Overview of the DEMO conceptual design activity in Japan K. Tobita, R. Hiwatari, H. Utoh, Y. Miyoshi, N. Asakura, Y. Sakamoto, Y. Someya, Y. Homma, M. Nakamura, K. Hoshino, H. Tanigawa, M. Nakamichi, S. Tokunaga, H. Kudo, A. Nishimura, The Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2018.04.059 Fusion Engineering and Design
2018 EU A Prototype Conductor by React&Wind Method for the EUROfusion DEMO TF Coils P. Bruzzone, K. Sedlak, X. Sarasola, B. Stepanov, D. Uglietti, R. Wesche, L. Muzzi, A. della Corte https://doi.org/10.1109/TASC.2017.2777939 IEEE Transactions on Applied Superconductivity
2018 EU DEMO Central Solenoid Design Based on the Use of HTS Sections at Highest Magnetic Field R. Wesche, X. Sarasola, K. Sedlák, N. Bykovsky, B. Stepanov, D. Uglietti, P. Bruzzone https://doi.org/10.1109/TASC.2018.2797955 IEEE Transactions on Applied Superconductivity
2018 EU Mechanical Analysis of the ENEA TF Coil Proposal for the EU DEMO Fusion Reactor M.E. Biancolini, R. Bonifetto, A. Chiappa, F. Giorgetti, V. Corato, L. Muzzi, S.Turtu https://doi.org/10.1109/TASC.2018.2796619 IEEE Transactions on Applied Superconductivity
2018 EU Quench Simulation of a DEMO TF Coil Using a Quasi-3D Coupling Tool Q. Le Coz, D. Ciazynski, M. Coleman, V. Corato, B. Lacroix, S. Nicollet, F. Nunio, R. Vallcorba and L. Zani https://doi.org/10.1109/TASC.2017.2786717 IEEE Transactions on Applied Superconductivity
2018 EU Status of CEA Magnet Design Tools and Applications to EU DEMO PF and CS Magnets L. Zani, D. Ciazynski, B. Lacroix, M. Coleman, V. Corato, Q. Le Coz, N. Misiara, S. Nicollet, F. Nunio, K. Sedlak, A. Torre and R. Vallcorba https://doi.org/10.1109/TASC.2018.2803073 IEEE Transactions on Applied Superconductivity
2018 EU Thermal-Hydraulic Test and Analysis of the ENEA TF Conductor Sample for the EU DEMO Fusion Reactor R. Bonifetto, P.Bruzzone, V.Corato, I. Muzi, L. Savoldi, B. Stepanov, R. Zanino, A. Zappatore https://doi.org/10.1109/TASC.2018.2821367 IEEE Transactions on Applied Superconductivity
2018 EU Comparison of deformation models of flexible manipulator joints for use in DEMO M. Li, H. Wu, H. Handroos, R. Skilton, J. Keep, A. Loving https://doi.org/10.1109/TPS.2018.2795084 IEEE Transactions on Plasma Science
2018 EU Core fueling of DEMO by direct line injection of high-speed pellets from the HFS A. Frattolillo, L. R. Baylor, F. Bombarda, S. K. Combs, Chr. Day, P. T. Lang, S. Migliori, B. Pégourié, B. Ploeckl https://doi.org/10.1109/TPS.2018.2798502 IEEE Transactions on Plasma Science
2018 EU Optics and Thermomechanical Analysis of the Accelerator for the DEMO Neutral Beam Injector P. Agostinetti and P. Sonato https://doi.org/10.1109/TPS.2018.2808409 IEEE Transactions on Plasma Science
2018 EU Overview of the HCPB Research Activities in EUROfusion F.A. Hernández, F. Arbeiter, L.V. Boccaccini, E. Bubelis, V.P. Chakin, I. Cristescu, B.E. Ghidersa, M. Gonzalez, W. Hering, T. Hernandez, X.Z. Jin, M. Kamlah, B. Kiss, R. Knitter, M.H.H. Kolb, P. Kurinskiy, O. Leys, I.A. Maione, M. Moscardini, G. Nadasi, H. Neuberger, P. Preslavtsev, S. Pupeschi, R. Rolli, S. Ruck, G.A. Spagnuolo, P.V. Vladimirov, C. Zeile, G. Zhou https://doi.org/10.1109/TPS.2018.2830813 IEEE Transactions on Plasma Science
2018 EU Recent Progress in the WCLL Breeding Blanket Design for the DEMO Fusion Reactor A. Tassone, A. Del Nevo, P. Arena, G. Bongiovì, G. Caruso, P. Alessandro di Maio, G. di Gironimo, M. Eboli, N. Forgione, R. Forte, F. Giannetti, G. Mariano, E. Martelli, F. Moro, R. Mozzillo, A. Tarallo, R. Villari https://doi.org/10.1109/TPS.2017.2786046 IEEE Transactions on Plasma Science
2018 EU Review of the innovative H&CD designs and the impact of their configurations on the performance of the EU DEMO fusion power plant reactor T. Franke, P. Agostinetti, G. Aiello, K. Avramidis, Ch. Bachmann, A. Bruschi, G. Federici, S. Garavaglia, G. Granucci, G. Grossetti, J. Jelonnek, J.-M. Noterdaeme, A. Simonin, T. Scherer, P. Sonato, D. Strauss, M. Q. Tran, A. Valentine, P. Vincenzi, R. Wenninger, S. Zheng https://doi.org/10.1109/TPS.2018.2800405 IEEE Transactions on Plasma Science
2018 EU Advancements in DEMO WCLL breeding blanket design and integration E. Martelli, A. Del Nevo, et. al., https://doi.org/10.1002/er.3750 International Journal of Energy Research
2018 EU The brittle-to-ductile transition in cold rolled tungsten: On the decrease of the brittle-to-ductile transition by 600K to -65°C C. Bonnekoh, A. Hoffmann, J. Reiser https://doi.org/10.1016/j.ijrmhm.2017.11.017 International Journal of Refractory Metals and Hard Materials
2018 EU Radiation effects on deuterium permeation for PLD alumina coated Eurofer steel measured during 1.8 MeV electron irradiation P. Muñoz, T. Hernández, I. García-Cortés, F.J. Sánchez, A. Maira, D. Iadicicco, M. Vanazzi, M.Utili, F.Di Fonzo, A.Moroño https://doi.org/10.1016/j.jnucmat.2018.10.008 Journal of Nuclear Materials
2018 EU The thermo-mechanical behaviour of W-Cu metal matrix composites for fusion heat sink applications: The influence of the Cu content E. Tejado, A.v. Müller, J-H You, J Y. Pastor https://doi.org/10.1016/j.jnucmat.2017.08.020 Journal of Nuclear Materials
2018 EU Evolution of mechanical performance with temperature of W/Cu and W/CuCrZr composites for fusion heat sink applications E. Tejado, A.v. Müller, J-H. You, J.Y. Pastor https://doi.org/10.1016/j.msea.2017.12.054 Materials Science and Engineering: A
2018 EU Impact of an integrated core/SOL description on the R and B T optimization of tokamak fusion reactors M. Siccinio, E. Fable, C. Angioni, S. Saarelma, A. Scarabosio and H. Zohm https://doi.org/10.1088/1741-4326/aa9583 Nuclear Fusion
2018 EU Multi-scale model for stresses, strains and swelling of reactor components under irradiation S.L. Dudarev, D.R. Mason, E. Tarleton, P.-W. Ma, A.E. Sand https://doi.org/10.1088/1741-4326/aadb48 Nuclear Fusion
2018 EU Tritium resources available for fusion reactors in the long term M. Kovari, M. Coleman, I. Cristescu, R. Smith https://doi.org/10.1088/1741-4326/aa9d25 Nuclear Fusion
2018 EU Crack bridging in as-fabricated and embrittled tungsten single fibre-reinforced tungsten composites shown by a novel in-situ high energy synchrotron tomography bending test J. Riesch, T. Höschen, M. Scheel, J.H. You, Ch. Linsmeier, J.-Y. Buffiere https://doi.org/10.1016/j.nme.2018.03.007 Nuclear Materials and Energy
2018 EU European divertor target concepts for DEMO: Design rationales and high heat flux performance J.H. You, E. Visca, Ch. Vorpahl, Ch. Bachmann, T. Barrett, B. Böswirth, F. Crescenzi, F. Domptail, M. Fursdon, F. Gallay, B-E. Ghidersa, H. Greuner, M. Li, A.v. Müller, J. Nicholas, J. Prokupek, J. Reiser, M. Richou, S. Roccella https://doi.org/10.1016/j.nme.2018.05.012 Nuclear Materials and Energy
2018 EU Improvement of EUROFER’s mechanical properties by optimized chemical compositions and thermo-mechanical treatments J. Hoffmann, M. Rieth, M. Klimenkov, S. Baumgärtner https://doi.org/10.1016/j.nme.2018.05.028 Nuclear Materials and Energy
2018 EU Long-term corrosion behavior of Al-based coatings in flowing Pb-15.7Li, produced by electrochemical ECX process S.-E. Wulf, W. Krauss, J. Konys, https://doi.org/10.1016/j.nme.2018.06.019 Nuclear Materials and Energy
2018 EU ODS ferritic steels obtained from gas atomized powders through the STARS processing route: Reactive synthesis as an alternative to mechanical alloying D. Pazos, A. Cintins, V. Castro, P. Fernández, J. Hoffmann, W.G. Vargas, T. Leguey, J. Purans, A. Anspoks, A. Kuzmin, I. Iturriza, N. Ordás https://doi.org/10.1016/j.nme.2018.06.014 Nuclear Materials and Energy
2018 EU Structural impact of creep in tungsten monoblock divertor target at 20 MW/m² M. Li, J.-H. You https://doi.org/10.1016/j.nme.2017.12.001 Nuclear Materials and Energy
2018 EU The effects of heat treatment at temperatures of 1100 °C to 1300 °C on the tensile properties of high-strength drawn tungsten fibres A.v. Müller, M. Ilg, H. Gietl, T. Höschen, R. Neu, G. Pintsuk, J. Riesch, U. Siefken, J.H. You https://doi.org/10.1016/j.nme.2018.06.003 Nuclear Materials and Energy
2018 EU Kink-limited Orowan strengthening explains the brittle to ductile transition of irradiated and unirradiated bcc metals T.D. Swinburne, S.L. Dudarev https://doi.org/10.1103/PhysRevMaterials.2.073608 Physical Review Materials
2018 EU AC loss, inter-strand resistance and mechanical properties of prototype EU DEMO TF conductors up to 30,000 load cycles K. Yagotyntsev, A. Nijhuis https://doi.org/10.1088/1361-6668/aaa34e Superconductor Science and Technology
2018 EU The effect of fast neutron irradiation on the superconducting properties of REBCO coated conductors with and without artificial pinning centers D. X. Fischer, R. Prokopec, J. Emhofer, M. Eisterer https://doi.org/10.1088/1361-6668/aaadf2 Superconductor Science and Technology
2017 EU The European DEMO fusion reactor: Design status and challenges from balance of plant point of view S. Ciattaglia, G. Federici, L. Barucca, A. Lampasi, S. inucci, I. Moscato https://doi.org/10.1109/EEEIC.2017.7977853 2017 IEEE International Conference on Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe)
2017 EU A new HCPB breeding blanket for the EU DEMO: Evolution, rationale and preliminary performances F.A. Hernández, P. Pereslavtsev, Q. Kang, P. Norajitra, B. Kiss, G. Nádasi, O.Bitz https://doi.org/10.1016/j.fusengdes.2017.02.008 Fusion Engineering and Design
2017 EU Accuracy improvement studies for remote maintenance manipulators Y. Wang, H. Wu, H. Handroos, M. Li, B. Mao, J. Wu, A. Loving, M. Coleman, O. Crofts, J. Keep https://doi.org/10.1016/j.fusengdes.2017.04.097 Fusion Engineering and Design
2017 EU Analysis of low pressure hydrogen separation from fusion exhaust gases by the means of superpermeability B.J. Peters, C. Day https://doi.org/10.1016/j.fusengdes.2017.05.124 Fusion Engineering and Design
2017 EU Analysis of steady state thermal-hydraulic behaviour of the DEMO divertor cassette body cooling circuit P.A. Di Maio, S. Garitta, J.-H. You, G. Mazzone, E. Vallone https://doi.org/10.1016/j.fusengdes.2017.02.012 Fusion Engineering and Design
2017 EU Analysis of the secondary circuit of the DEMO fusion power plant using GateCycle L. Malinowski, M. Lewandowska, F. Giannetti https://doi.org/10.1016/j.fusengdes.2017.03.026 Fusion Engineering and Design
2017 EU Application of the novel VTTJ technique (Vacuum Tight Threaded Junction) to fusion reactor relevant geometry and materials P. Agostinetti, F.Degli Agostini, P.Sonato https://doi.org/10.1016/j.fusengdes.2017.01.048 Fusion Engineering and Design
2017 EU Automated parametric neutronics analysis of the Helium Cooled Pebble Bed breeder blanket with Be12Ti J. Shimwell, L. Lu, Y. Qiu, P. Pereslavtsev, A. Häußler, F. Hernández, C. Zeile, T. Eade, G.A. Spagnuolo, S. McIntosh, L. Packer, T. Barrett https://doi.org/10.1016/j.fusengdes.2017.01.004 Fusion Engineering and Design
2017 EU Ceramic membranes for processing plasma enhancement gases S. Tosti, A. Santucci, M. Incelli, G. Bruni https://doi.org/10.1016/j.fusengdes.2017.01.010 Fusion Engineering and Design
2017 EU CFD analysis of WCLL BB PbLi manifold E. Martelli, G. Caruso, F. Giannetti, A. Giovinazzi, A. Del Nevoc https://doi.org/10.1016/j.fusengdes.2017.04.108 Fusion Engineering and Design
2017 EU CFD simulation of the magnetohydrodynamic flow inside the WCLL breeding blanket module A. Tassone, G. Caruso, A. Del Nevo, I.Di Piazza https://doi.org/10.1016/j.fusengdes.2017.05.098 Fusion Engineering and Design
2017 EU Choice of a low operating temperature for the DEMO EUROFER97 divertor cassette G. Mazzone, J. Aktaa, C. Bachmann, D.De Meis, P. Frosi, E. Gaganidze, G.Di Gironimo, G. Mariano, D. Marzullo, M.T. Porfiri, M. Rieth, R. Villari, J.H.You https://doi.org/10.1016/j.fusengdes.2017.02.013 Fusion Engineering and Design
2017 EU Concept design of DEMO Divertor Cassette Remote Handling: Simply Supported Beam Approach R. Mozzillo, G. Di Gironimo, H. Mäkinen, G. Miccichè, T. Määttäb https://doi.org/10.1016/j.fusengdes.2017.01.021 Fusion Engineering and Design
2017 EU Cyclic load effect on round strands made by twisted stacks of HTS tapes N. Bykovsky, D. Uglietti, R. Wesche, P. Bruzzone https://doi.org/10.1016/j.fusengdes.2017.04.050 Fusion Engineering and Design
2017 EU Design and fabrication of a Permeator Against Vacuum prototype for small scale testing at Lead-Lithium facility B. Garcinuño, D. Rapisarda, I. Fernández-Berceruelo, D. Jiménez-Rey, J. Sanz, C. Moreno, I. Palermo, Á. Ibarra https://doi.org/10.1016/j.fusengdes.2017.02.060 Fusion Engineering and Design
2017 EU Design options to mitigate deep cracking of tungsten armor M. Li, J.-H. You https://doi.org/10.1016/j.fusengdes.2017.01.015 Fusion Engineering and Design
2017 EU Effect of engineering constraints on charged particle wall heat loads in DEMO F. Maviglia, G. Federici, R. Wenninger, R. Albanese, R. Ambrosino, C. Bachmann, L. Barbato, F. Cismondi, M. Firdaouss, V.P. Loschiavo, C. Lowry https://doi.org/10.1016/j.fusengdes.2017.02.077 Fusion Engineering and Design
2017 EU Effective thermal conductivity of advanced breeder pebble beds S. Pupeschi, R. Knitter, M. Kamlah https://doi.org/10.1016/j.fusengdes.2017.01.026 Fusion Engineering and Design
2017 EU EU DEMO transient phases: Main constraints and heating mix studies for ramp-up and ramp-down P. Vincenzi, R. Ambrosino, J.F. Artaud, T. Bolzonella, L. Garzotti, G. Giruzzi, G. Granucci, F. Köchl, M. Mattei, M.Q. Tran, R.Wenninger https://doi.org/10.1016/j.fusengdes.2017.02.064 Fusion Engineering and Design
2017 EU Heating & current drive efficiencies, TBR and RAMI considerations for DEMO T. Franke, P. Agostinetti, K. Avramidis, A. Bader, Ch. Bachmann, W. Biel, T. Bolzonella, S. Ciattaglia, M. Coleman, F. Cismondi, G. Granucci, G. Grossetti, J. Jelonnek, I. Jenkins, M. Kalsey, R. Kembleton, N. Mantel, J.-M.Noterdaeme, N. Rispoli, A. Simonin, P. Sonato, M.Q. Tran, P. Vincenzi, R.Wenninger https://doi.org/10.1016/j.fusengdes.2017.02.007 Fusion Engineering and Design
2017 EU Heavy water decontamination tests through a Pd-Ag membrane reactor: Water Gas Shift and Isotopic Swamping performances M. Incelli, A. Santucci, S. Tosti, M. Sansovini, M. Carlinic https://doi.org/10.1016/j.fusengdes.2017.06.021 Fusion Engineering and Design
2017 EU Identification of accident sequences for the DEMO plant T. Pinna, D. Carloni, A. Carpignano, S. Ciattaglia, J. Johnston, M.T. Porfiri, L. Savoldi, N. Taylor, G. Sobrero, A.C. Uggenti, M. Vaisnoras, R. Zanino https://doi.org/10.1016/j.fusengdes.2017.02.026 Fusion Engineering and Design
2017 EU Identification of blanket design points using an integrated multi-physics approach G.A. Spagnuolo, F. Franza, U. Fischer, L. V. Boccaccini https://doi.org/10.1016/j.fusengdes.2017.03.057 Fusion Engineering and Design
2017 EU Impact of pretreatment conditions on defect formation during the fabrication of Al-based corrosion barriers by ECX process S.-E. Wulf, W. Krauss, J. Konys https://doi.org/10.1016/j.fusengdes.2017.03.115 Fusion Engineering and Design
2017 EU Improved solid decomposition algorithms for the CAD-to-MC conversion tool McCad L. Lu, Y. Qiu, U. Fischer https://doi.org/10.1016/j.fusengdes.2017.02.040 Fusion Engineering and Design
2017 EU Influence of modifications of HCLL blanket design on MHD pressure losses C. Mistrangelo, L. Bühler, C. Koehly, H.-J. Brinkmann https://doi.org/10.1016/j.fusengdes.2016.11.012 Fusion Engineering and Design
2017 EU Initial definition of structural load conditions in DEMO C. Bachmann, W. Biel, S. Ciattaglia, G. Federici, F. Maviglia, G. Mazzone, G. Ramogida, F. Villone, N. Taylor https://doi.org/10.1016/j.fusengdes.2017.02.061 Fusion Engineering and Design
2017 EU Matter injection technology for DEMO, state of the art B. Ploeckl, C. Day, A. Frattolillo, Y. Igitkhanov, P.T. Lang, B. Pégourié, H. Zohm https://doi.org/10.1016/j.fusengdes.2017.02.020 Fusion Engineering and Design
2017 EU Melt infiltrated tungsten–copper composites as advanced heat sink materials for plasma facing components of future nuclear fusion devices A.v. Muller, D. Ewert, A. Galatanu, M. Milwich, R. Neu, J.Y. Pastor, U. Siefken, E. Tejado, J.H.You https://doi.org/10.1016/j.fusengdes.2017.01.042 Fusion Engineering and Design
2017 EU Methodological approach for DEMO neutronics in the European PPPT programme: Tools, data and analyses U. Fischer, C. Bachmann, J.P. Catalan, T. Eade, D. Flammini, M.Gilbert, J.-Ch.Jaboulay, A. Konobeev, D. Leichtle, L. Lu, F. Malouch, F. Moro, P. Pereslavtsev, Y. Qiu, J. Sanz, P. Sauvan, G. Stankunas, A. Travleev, A. Turner, F. Ogando, I. Palermo, R.Villari https://doi.org/10.1016/j.fusengdes.2017.01.053 Fusion Engineering and Design
2017 EU MHD flow and heat transfer in model geometries for WCLL blankets L. Buehler, C. Mistrangelo https://doi.org/10.1016/j.fusengdes.2017.01.014 Fusion Engineering and Design
2017 EU Neutron activation of impurity seeding gases within a DEMO environment R.J. Walker, M.R. Gilbert https://doi.org/10.1016/j.fusengdes.2017.01.057 Fusion Engineering and Design
2017 EU Neutronic analyses for the optimization of the advanced HCPB breeder blanket design for DEMO P. Pereslavtsev, U. Fischer, F. Hernandez, L. Lu https://doi.org/10.1016/j.fusengdes.2017.01.028 Fusion Engineering and Design
2017 EU Nuclear Analysis of the HCLL blanket for the European DEMO J.-C. Jaboulay, G. Aiello, J. Aubert, A. Morin, M. Troisne https://doi.org/10.1016/j.fusengdes.2017.01.050 Fusion Engineering and Design
2017 EU On the thermo-mechanical behaviour of DEMO water-cooled lithium lead equatorial outboard blanket module P.A. Di Maio, P. Arena, G. Bongiovì, P. Chiovaro, A.Del Nevo, M.L. Richiusa https://doi.org/10.1016/j.fusengdes.2017.05.051 Fusion Engineering and Design
2017 EU Options for a high heat flux enabled helium cooled first wall for DEMO F. Arbeiter, Y. Chen, B.-E. Ghidersa, C. Klein, H. Neuberger, S. Ruck, G. Schlindwein, F. Schwab, A. von der Weth https://doi.org/10.1016/j.fusengdes.2017.04.083 Fusion Engineering and Design
2017 EU Potential approach of IR-analysis for high heat flux quality assessment of divertor tungsten monoblock components H. Greuner, B. Böswirth, H. Maier, T. Hirai, S. Panayotis, F. Crescenzi, S. Roccella, E. Visca, M. Missirlian, M. Richou https://doi.org/10.1016/j.fusengdes.2017.02.092 Fusion Engineering and Design
2017 EU Preliminary safety analysis of LOCAs in one EU DEMO HCPB blanket module Q. Kang, D. Carloni https://doi.org/10.1016/j.fusengdes.2017.03.082 Fusion Engineering and Design
2017 EU Progress in EU-DEMO in-vessel components integration F. Cismondi, P. Agostinetti, G. Aiello, J. Aubert, C. Bachmann, W. Biel, L.V. Boccaccini, A. Bruschi, Chr. Day, A. Del Nevo, G. Di Gironimo, I. Fernandez, T. Frankea, G. Grossetti, F. Hernandez, D. Iglesias, J. Keep, P. Lang, A. Loving, P. Norajitra, G. Mazzone, D. Marzullo, B. Ploeckl, R. Mozzillo, D. Rapisarda, P. Sonato, M.Q. Tran, A. Vaccaro, R. Villari, J.H. You, C.Zeile https://doi.org/10.1016/j.fusengdes.2017.03.147 Fusion Engineering and Design
2017 EU Progress in the initial design activities for the European DEMO divertor: Subproject “Cassette” J.H. You, G. Mazzone, Ch. Bachmann, D. Coccorese, V. Cocilovo, D.De Meis, P.A.Di Maio, D. Dongiovanni, P. Frosi, G.Di Gironimo, S. Garitta, G. Mariano, D. Marzullo, M.T. Porfiri, G. Ramogida, E. Vallone, R. Villari, M. Zucchetti https://doi.org/10.1016/j.fusengdes.2017.03.018 Fusion Engineering and Design
2017 EU Rationale and method for design of DEMO WCLL breeding blanket poloidal segmentation R. Mozzillo, A.Del Nevo, E. Martellib, G.Di Gironimo https://doi.org/10.1016/j.fusengdes.2017.01.039 Fusion Engineering and Design
2017 EU Remote handling of DEMO breeder blanket segments: Blanket transporter conceptual studies J. Keep, S. Wood, N. Gupta, M. Coleman, A. Loving https://doi.org/10.1016/j.fusengdes.2017.02.016 Fusion Engineering and Design
2017 EU Resolving safety issues for a demonstration fusion power plant N. Taylor, S. Ciattaglia, H. Boyer, D. Coombs, X.Z. Jin, K. Liger, J.C. Mora, G. Mazzini, T. Pinna, E. Urbonavicius https://doi.org/10.1016/j.fusengdes.2017.02.018 Fusion Engineering and Design
2017 EU Review of hydrogen isotopes transport parameters and considerations to corresponding experiments A. von der Weth, F. Arbeiter, D. Klimenko, V. Pasler, G. Schlindwein https://doi.org/10.1016/j.fusengdes.2017.04.024 Fusion Engineering and Design
2017 EU Self-passivating W-Cr-Y alloys: Characterization and testing A. Calvo, C. García-Rosales, N. Ordás, I. Iturriza, K. Schlueter, F. Koch, G. Pintsuk, E. Tejado, J.Y. Pastor https://doi.org/10.1016/j.fusengdes.2017.03.001 Fusion Engineering and Design
2017 EU Status of the engineering activities carried out on the European DCLL D. Rapisarda, I. Fernandez, I. Palermo, F.R. Urgorri, L. Maqueda, D. Alonso, T. Melichar, O. Frýbort, L. Vála, M. Gonzalez, P. Norajitra, H. Neubergerd, A. Ibarra https://doi.org/10.1016/j.fusengdes.2017.02.022 Fusion Engineering and Design
2017 EU Structural analysis of DEMO divertor cassette body and design study based on RCC-MRx P. Frosi, C. Bachmann, G.Di Gironimo, G. Mazzone, D. Marzullo, J.-H. You https://doi.org/10.1016/j.fusengdes.2017.02.062 Fusion Engineering and Design
2017 EU Structural analysis of the back supporting structure of the DEMO WCLL outboard blanket P.A. Di Maio, P. Arena, G. Bongiovì, P. Chiovaro, A.Del Nevo, R. Giammusso, M.L. Richiusa https://doi.org/10.1016/j.fusengdes.2016.12.018 Fusion Engineering and Design
2017 EU Systems code studies on the optimization of design parameters for a pulsed DEMO tokamak reactor W. Biel, M. Beckers, R. Kemp, R. Wenninger, H. Zohm https://doi.org/10.1016/j.fusengdes.2017.01.009 Fusion Engineering and Design
2017 EU Systems engineering approach for pre-conceptual design of DEMO divertor cassette D. Marzullo, C. Bachmann, D. Coccorese, G.Di Gironimo, G. Mazzone, J.-H. You https://doi.org/10.1016/j.fusengdes.2017.02.017 Fusion Engineering and Design
2017 EU Tensile deformation behavior of tungsten fibre-reinforced tungsten composite specimens in as-fabricated state H. Gietl, J. Riesch, J.W. Coenen, T. Höschen, Ch. Linsmeier, R. Neu https://doi.org/10.1016/j.fusengdes.2017.02.054 Fusion Engineering and Design
2017 EU The impact on remote maintenance of varying the aspect ratio and number of TF coils for DEMO D. Wolff, M. Coleman, D. Cooper, O. Crofts, J. Horne, J. Keep, A. Loving https://doi.org/10.1016/j.fusengdes.2017.04.023 Fusion Engineering and Design
2017 EU Thermal optimization of the Helium-Cooled Lithium Lead breeding zone layout design regarding TBR enhancement P. Arena, J. Aubert, G. Aiello, R. Boullon, J.C. Jaboulay, P.A.Di Maio, A. Morin, G. Rampal https://doi.org/10.1016/j.fusengdes.2017.03.086 Fusion Engineering and Design
2017 EU Thermal performance augmentation by rib-arrays for helium-gas cooled First Wall applications S. Ruck, B. Kaiser, F. Arbeiter https://doi.org/10.1016/j.fusengdes.2017.03.171 Fusion Engineering and Design
2017 EU Thermal radiation analysis of DEMO tokamak B. Končar, M. Draksler, O.C. Garrido, B. Meszaros https://doi.org/10.1016/j.fusengdes.2017.03.134 Fusion Engineering and Design
2017 EU Thermal-hydraulic and quench analysis of the DEMO toroidal field winding pack WP1 K. Sedlak, P. Bruzzone, M. Lewandowska https://doi.org/10.1016/j.fusengdes.2017.03.065 Fusion Engineering and Design
2017 EU Thermal-hydraulic design of a DCLL breeding blanket for the EU DEMO I. Fernández-Berceruelo, D. Rapisarda, I. Palermo, L. Maqueda, D. Alonso, T. Melichar, O. Frýbort. L. Vála, Á. Ibarra https://doi.org/10.1016/j.fusengdes.2017.03.108 Fusion Engineering and Design
2017 EU Thermo-mechanical analyses and ways of optimization of the helium cooled DEMO First Wall under RCC-MRx rules J. Aubert, G. Aiello, P. Arena, R. Boullon, J.-C. Jaboulay, A.Morin https://doi.org/10.1016/j.fusengdes.2016.12.040 Fusion Engineering and Design
2017 EU Time-dependent power requirements for pulsed fusion reactors in systems codes J. Morris, M. Kovari https://doi.org/10.1016/j.fusengdes.2017.04.033 Fusion Engineering and Design
2017 EU Tritium modelling in HCPB breeder blanket at a system level E. Carella, C. Moreno, F. Roca Urgorri, D. Rapisarda, A. Ibarra https://doi.org/10.1016/j.fusengdes.2017.01.051 Fusion Engineering and Design
2017 EU Uncertainties in power plant design point evaluations H. Lux, R. Kemp, R. Wenninger, W. Biel, G. Federici, W. Morris, H.Zohm https://doi.org/10.1016/j.fusengdes.2017.01.029 Fusion Engineering and Design
2017 EU WCLL breeding blanket design and integration for DEMO 2015: status and perspectives A.Del Nevo, E. Martelli, P. Agostini, P. Arena, G. Bongiovì, G. Caruso, G.Di Gironimo, P.A.Di Maio, M. Eboli, R. Giammusso, F. Giannetti, A. Giovinazzi, G. Mariano, F. Moro, R. Mozzillo, A. Tassone, D. Rozzia, A. Tarallo, M. Tarantino, M. Utili, R. Villari https://doi.org/10.1016/j.fusengdes.2017.03.020 Fusion Engineering and Design
2017 JA Conceptual design study of pellet fueling system for DEMO S. Tokunaga, A. Matsuyama, Y. Someya, H. Utoh, Y. Sakamoto, N. Asakura, K. Tobita, Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2017.02.079 Fusion Engineering and Design
2017 JA New model of plasma heat load on the first wall Y. Miyoshi, N. Asakura, K. Hoshino, H. Takase, R. Hiwatari, Y. Someya, Y. Sakamoto, K. Tobita, Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2017.04.068 Fusion Engineering and Design
2017 JA Physics design study of the divertor power handling in 8m class DEMO reactor K. Hoshino, N. Asakura, S. Tokunaga, Y. Homma, K. Shimizu, Y. Sakamoto, K. Tobita, Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2017.03.068 Fusion Engineering and Design
2017 JA Shutdown dose-rate assessment during the replacement of in-vessel components for a fusion DEMO reactor Y. Someya, H. Utoh, R. Hiwatari, H. Tanigawa, K. Tobita, Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2017.02.108 Fusion Engineering and Design
2017 JA Technological assessment between vertical and horizontal remote maintenance schemes for DEMO reactor H. Utoh, R. Hiwatari, K. Tobita, Y. Someya, A. Aoki, Y. Sakamoto, N. Asakura, Joint Special Design Team for Fusion DEMO https://doi.org/10.1016/j.fusengdes.2017.03.036 Fusion Engineering and Design
2017 EU Preliminary system modelling for the EUROfusion Dual Cooled Lithium Lead blanket F.R. Urgorri, C. Moreno, E. Carella, J. Castellanos, A. Del Nevo, Á. Ibarra https://doi.org/10.1080/15361055.2016.1273712 Fusion Science and Technology
2017 EU Quench propagation in a TF coil of the EU DEMO L. Savoldi, R. Bonifetto, A. Brighenti, V. Corato, L. Muzzi, S. Turtu’, R. Zanino & A. Zappatore https://doi.org/10.1080/15361055.2017.1333866 Fusion Science and Technology
2017 EU Tritium Plant Technology Development for a European DEMO Power Plant R. Lawless, B. Butler, A. Hollingsworth, P. Camp, R. Shaw https://doi.org/10.1080/15361055.2017.1290948 Fusion Science and Technology
2017 EU&JA Radioactive Waste Studies in the Frame of the IEA Cooperative Program on the Environmental, Safety, and Economic Aspects of Fusion Power M. Zucchetti, Z. Chang, L. El-Guebaly, Jung-Hoon Han, B. Kolbasov, V. Khripunov, M. Riva, Y. Someya, R. Testoni & K. Tobita https://doi.org/10.1080/15361055.2017.1350474 Fusion Science and Technology
2017 JA Design strategy and recent design activity on Japan’s DEMO K. Tobita, N. Asakura, R. Hiwatari, Y. Someya, H. Utoh, K. Katayama, A. Nishimura, Y. Sakamoto, Y. Homma, H. Kudo, Y. Miyoshi, M. Nakamura, S. Tokunaga, A. Aoki, The Joint Special Design Team for Fusion DEMO https://doi.org/10.1080/15361055.2017.1364112 Fusion Science and Technology
2017 JA Estimation of tritium permeation rate to cooling water in fusion DEMO condition K. Katayama, Y. Someya, K. Tobita, H. Nakamura, H. Tanigawa, M. Nakamura, N. Asakura, K. Hoshino, T. Chikada, Y. Hatano and S. Fukada https://doi.org/10.1080/15361055.2017.1288423 Fusion Science and Technology
2017 EU Design and R&D for the DEMO Toroidal Field Coils Based on Nb3Sn React and Wind Method K. Sedlak, P. Bruzzone, X. Sarasola, B. Stepanov, R. Wesche https://doi.org/10.1109/TASC.2016.2628814 IEEE Transactions on Applied Superconductivity
2017 EU Design, manufacture and test of an 80 kA-class Nb3Sn cable-in-conduit conductor with rectangular geometry and distributed pressure relief channels L. Muzzi, L. Affinito, S. Chiarelli, V. Corato, A. della Corte, A. Di Zenobio, R. Freda, S. Turtu, A. Anemona, R. Righetti, A. Bragagni, M. Seri, F. Gabiccini, G. Roveta, A. Aveta, S. Galignano, P. Bruzzone, K. Sedlak, B. Steponov, R. Wesche https://doi.org/10.1109/TASC.2016.2627539 IEEE Transactions on Applied Superconductivity
2017 EU EU-DEMO TF and CS Magnet Systems Design and Analyses performed at CEA A. Torre, D. Ciazynski, L. Zani https://doi.org/10.1109/TASC.2016.2640446 IEEE Transactions on Applied Superconductivity
2017 EU Thermodynamics of impurity-enhanced vacancy formation in metals. L. Bukonte, T. Ahlgren, K. Heinola https://doi.org/10.1063/1.4974530 Journal of Applied Physics
2017 EU A stepladder approach to a tokamak fusion power plant H. Zohm, F. Träuble, W. Biel, E. Fable, R. Kemp, H. Lux, M. Siccinio and R. Wenninger https://doi.org/10.1088/1741-4326/aa739e Nuclear Fusion
2017 EU Activation, decay heat, and waste classification studies of the European DEMO concepts M.R. Gilbert, T. Eade, C. Bachmann, U. Fischer and N.P. Taylor https://doi.org/10.1088/1741-4326/aa5bd7 Nuclear Fusion
2017 EU Conceptual design of the DEMO neutral beam injectors: main developments and R&D achievements P. Sonato, P. Agostinetti, T. Bolzonella, F. Cismondi, U. Fantz, A. Fassina, T. Franke, I. Furno, C. Hopf, I. Jenkins, E. Sartori, M.Q. Tran, J. Varje, P. Vincenzi and L. Zanotto https://doi.org/10.1088/1741-4326/aa6186 Nuclear Fusion
2017 EU Conceptual design of the EU DEMO EC-system: main developments and R&D achievements G. Granucci, G. Aiello, S. Alberti, K.A. Avramidis, F. Braunmüller, A. Bruschi, J. Chelis, J. Franck, L. Figini, G. Gantenbein, S. Garavaglia, G. Grossetti, S. Illy, Z. Ioannidis, J. Jelonnek, P. Kalaria, G. Latsas, A. Moro, I. Gr. Pagonakis, D. Peponis, E. Poli, N. Rispoli, T. Rzesnicki, T. Scherer, D. Strauss, M. Thumm, I. Tigelis, C. Tsironis, C. Wu, T. Franke and M.Q. Tran https://doi.org/10.1088/1741-4326/aa7b15 Nuclear Fusion
2017 EU Dealing with uncertainties in fusion power plant conceptual development R. Kemp, H. Lux, M. Kovari, J. Morris, R. Wenninger, H. Zohm, W. Biel and G. Federici https://doi.org/10.1088/1741-4326/aa5e2c Nuclear Fusion
2017 EU DEMO port plug design and integration studies G. Grossetti, L.V. Boccaccini, F. Cismondi, A. Del Nevo, U. Fischer, T. Franke, G. Granucci, F. Hernández, R. Mozzillo, D. Strauß, M.Q. Tran, A. Vaccaro and R. Villari https://doi.org/10.1088/1741-4326/aa7f67 Nuclear Fusion
2017 EU European DEMO design strategy and consequences for materials G. Federici, W. Biel, M.R. Gilbert, R. Kemp, N. Taylor and R. Wenninger https://doi.org/10.1088/1741-4326/57/9/092002 Nuclear Fusion
2017 EU Selected transport studies of a tokamak-based DEMO fusion reactor E. Fable, R. Wenninger and R. Kemp https://doi.org/10.1088/0029-5515/57/2/022015 Nuclear Fusion
2017 EU Self-consistent coupling of DSMC method and SOLPS code for modeling tokamak particle exhaust F. Bonelli, S. Varoutis, D. Coster, C. Day, R. Zanino and JET Contributors https://doi.org/10.1088/1741-4326/aa686f Nuclear Fusion
2017 EU The DEMO wall load challenge R. Wenninger, R. Albanese, R. Ambrosino, F. Arbeiter, J. Aubert, C. Bachmann, L. Barbato, T. Barrett, M. Beckers, W. Biel, L. Boccaccini, D. Carralero, D. Coster, T. Eich, A. Fasoli, G. Federici, M. Firdaouss, J. Graves, J. Horacek, M. Kovari, S. Lanthaler, V. Loschiavo, C. Lowry, H. Lux, G. Maddaluno, F. Maviglia, R. Mitteau, R. Neu, D. Pfefferle, K. Schmid, M. Siccinio, B. Sieglin, C. Silva, A. Snicker, F. Subba, J. Varje and H. Zohm https://doi.org/10.1088/1741-4326/aa4fb4 Nuclear Fusion
2017 EU The physics and technology basis entering European system code studies for DEMO R. Wenninger, R. Kembleton, C. Bachmann, W. Biel, T. Bolzonella, S. Ciattaglia, F. Cismondi, M. Coleman, A.J.H. Donné, T. Eich, E. Fable, G. Federici, T. Franke, H. Lux, F. Maviglia, B. Meszaros, T. Pütterich, S. Saarelma, A. Snickers, F. Villone, P. Vincenzi, D. Wolff and H. Zohm https://doi.org/10.1088/0029-5515/57/1/016011 Nuclear Fusion
2017 EU Towards powerful negative ion beams at the test facility ELISE for the ITER and DEMO NBI systems U. Fantz, C. Hopf, D. Wünderlich, R. Friedl, M. Fröschle, B. Heinemann, W. Kraus, U. Kurutz, R. Riedl, R. Nocentini and L. Schiesko https://doi.org/10.1088/1741-4326/aa778b Nuclear Fusion
2017 JA Reduction of poloidal magnetic flux consumption during plasma current ramp-up in DEMO relevant plasma regimes T. Wakatsuki, T. Suzuki, N. Hayashi, J. Shiraishi, Y. Sakamoto, S. Ide, H. Kubo and Y. Kamada https://doi.org/10.1088/0029-5515/57/1/016015 Nuclear Fusion
2017 JA Studies of Power Exhaust and Divertor Design for a 1.5 GW-level Fusion Power DEMO N. Asakura, K. Hoshino, S. Suzuki, S. Tokunaga, H. Kudo, Y. Someya, H. Utoh, Y. Sakamoto, R. Hiwatari, K. Tobita, K. Shimizu, K. Ezato, Y. Seki, N. Ohno, Y. Ueda https://doi.org/10.1088/1741-4326/aa867a Nuclear Fusion
2017 EU Investigations of the first-wall erosion of DEMO with the CELLSOR code M. Beckers, W. Biel, M. Tokar, U. Samm https://doi.org/10.1016/j.nme.2017.01.006 Nuclear Materials and Energy
2017 EU Optimization of pumping efficiency and divertor operation in DEMO S. Varoutis, F. Bonelli, C. Day, Y. Igitkhanov https://doi.org/10.1016/j.nme.2017.04.001 Nuclear Materials and Energy
2017 JA Numerical analysis of tungsten erosion and deposition processes under a DEMO divertor plasma Y. Homma, K. Hoshino, S. Yamoto, N. Asakura, S. Tokunaga, A. Hatayama, Y. Sakamoto, R. Hiwatari, K. Tobita, Joint Special Design Team for Fusion Demo https://doi.org/10.1016/j.nme.2017.05.003 Nuclear Materials and Energy
2017 EU Thermal – hydraulic analysis of LTS cables for the DEMO TF coil using simplified models M. Lewandowska, A. Dembkowska https://doi.org/10.1515/nuka-2017-0004 Nukleonika
2017 JA Progress of divertor study on DEMO design K. Hoshino, N. Asakura, S. Tokunaga, K. Shimizu, Y. Homma, Y. Someya, H. Utoh, Y. Sakamoto, K. Tobita, The Joint Special Design Team for Fusion DEMO https://doi.org/10.1585/pfr.12.1405023 Plasma and Fusion Research
2016 EU 4C Code Analysis of High-Margin Quench Propagation in a DEMO TF Coil R. Zanino, R. Bonifetto, L. Savoldi, L. Muzzi https://doi.org/10.1109/SOFE.2015.7482374 2015 IEEE 26th Symposium on Fusion Engineering (SOFE)
2016 EU On the present status of the EU demo H&CD systems, technology, functions and mix T. Franke, K. Avramidis, G. Granucci, J. Jelonnek, M. Kalsey, J.-M. Noterdaeme, A. Simonin, P. Sonato, P. Vincenzi, M.Q. Tran https://doi.org/10.1109/SOFE.2015.7482410 2015 IEEE 26th Symposium on Fusion Engineering (SOFE)
2016 EU Overview of DCLL research activities in the EU/Spain D. Rapisarda, I. Fernandez, I. Palermo, M. Gonzalez, C. Moreno, E. Mas de les Valls, A. Ibarra https://doi.org/10.1109/SOFE.2015.7482358 2015 IEEE 26th Symposium on Fusion Engineering (SOFE)
2016 EU&JA Progress in Thermohydraulic Analysis of Accident Scenarios of a Water-Cooled Fusion Demo Reactor M. Nakamura, K. Watanabe, K. Tobita, Y. Someya, H. Tanigawa, H. Utoh, Y. Sakamoto, T. Araki, S. Asano, K. Asano, T. Kunugi, T. Yokomine, W. Gulden https://doi.org/10.1109/SOFE.2015.7482295 2015 IEEE 26th Symposium on Fusion Engineering (SOFE)
2016 JA Analysis on Ex-Vessel Loss of Coolant Accident for a Water-Cooled Fusion Demo Reactor K. Watanabe, M. Nakamura, T. Araki, K. Tobita, Y. Someya, H. Tanigawa, H. Utoh, Y. Sakamoto, S. Asano, K. Asano https://doi.org/10.1109/SOFE.2015.7482333 2015 IEEE 26th Symposium on Fusion Engineering (SOFE)
2016 JA Photon Trapping Effects in DEMO Divertor Plasma K. Hoshino, K. Sawada, R. Idei, S. Tokunaga, N. Asakura, K. Shimizu, N. Ohno https://doi.org/10.1002/ctpp.201610039 Contributions to Plasma Physics
2016 EU Thermo-hydraulic analyses associated with a CEA design proposal for a DEMO TF conductor R. Vallcorba, B. Lacroix, D. Ciazynski, A. Torre, F. Nunio, L. Zani, Q. Le Coz, M. Lewandowska, M. Coleman https://doi.org/10.1016/j.cryogenics.2016.05.004 Cryogenics
2016 EU Supercritical CO2Brayton power cycles for DEMO fusion reactor based on Dual Coolant Lithium Lead blanket J. Linares, A. Cantizano, B. Moratilla, Víctor Martín-Palacios, L. Batet https://doi.org/10.1016/j.energy.2016.01.020 Energy
2016 EU Activity inventories and decay heat calculations for a DEMO with HCPB and HCLL blanket modules G. Stankunas, A.Tidikas, P.Pereslavstev, J.Catalan, R.Garcia, F.Ogando, U.Fischer https://doi.org/10.1016/j.fusengdes.2016.02.101 Fusion Engineering and Design
2016 EU Advanced design of the mechanical Tritium pumping system for JET DTE2 T. Giegerich, N. Bekris, P. Camp, C. Day, M. Gethins, S. Lesnoy, X. Luo, R. Müller, S. Ochoa, P. Pfeil, R. Smith, H. Strobel, H. Stump https://doi.org/10.1016/j.fusengdes.2016.02.098 Fusion Engineering and Design
2016 EU Advanced Tungsten Materials for Plasma-facing Components of DEMO and Fusion Power Plants R. Neu, J. Riesch, J. W. Coenen, M. Avello, J. Brinkmann, A. Calvo, J. Du, S. Elgeti, G. Holzner, C. Garcia-Rosales, H. Greuner, Y. Han, T. Hoeschen, B. Jasper, F. Koch, C. Linsmeier, A. Litnovsky, M. Munoz, T. Wegener, S. Wurster, J-H. You, P. Zhao https://doi.org/10.1016/j.fusengdes.2016.01.027 Fusion Engineering and Design
2016 EU Busbar arcs at large fusion magnets: Model experiments on busbar arcing in a double-walled feeder tube with the LONGARC device D. Klimenko, V.Pasler https://doi.org/10.1016/j.fusengdes.2015.11.059 Fusion Engineering and Design
2016 EU Catalytic membrane reactor for tritium extraction system from He purge A. Santucci, M. Incelli, M. Sansovini, S. Tosti https://doi.org/10.1016/j.fusengdes.2016.02.028 Fusion Engineering and Design
2016 EU Conceptual design studies for the European DEMO divertor: Rationale and first results J.H. You, G. Mazzone, E. Visca, Ch. Bachmann, T. Barrett, G. Brolatti, V. Cocilovo, F. Crescenzi, P. K. Domalapally, D. Dongiovanni, S. Entler, G. Federici, P. Frosi, M. Fursdon, H. Greuner, D. Hancock, S. McIntosh, A. v. Müller, M. T. Porfiri, G. Ramogida, J. Reiser, M. Richou, M. Rieth, S. Roccella, A. Rydzy, R. Villari, V. Widak https://doi.org/10.1016/j.fusengdes.2015.11.012 Fusion Engineering and Design
2016 EU Configuration Management of the EU DEMO Conceptual Design Data B. Meszaros, M. Shannon, D. Marzullo, C. Woodley, S. Rowe, G. Di Gironimo https://doi.org/10.1016/j.fusengdes.2015.11.008 Fusion Engineering and Design
2016 EU Consequences of the technology survey and gap analysis on the EU DEMO R&D programme in tritium, matter injection and vacuum C. Day, B. Butler, T. Giegerich, P.L. Lang, R. Lawless, B. Meszaros https://doi.org/10.1016/j.fusengdes.2016.03.008 Fusion Engineering and Design
2016 EU Divertor Power Spreading in DEMO Reactor by Impurity Seeding R. Zagorski, I. Ivanova-Stanik, K. Galazka https://doi.org/10.1016/j.fusengdes.2016.03.058 Fusion Engineering and Design
2016 EU Electro-magnetic Flow Coupling for Liquid Metal Blanket Applications C. Mistrangelo, L. Buehler https://doi.org/10.1016/j.fusengdes.2015.11.052 Fusion Engineering and Design
2016 EU Evaluation of EM loads distribution on DEMO blanket segments and their effect on mechanical integrity I.A. Maione, L.V. Boccaccini, C. Zeile https://doi.org/10.1016/j.fusengdes.2016.02.035 Fusion Engineering and Design
2016 EU Failure Rate modeling using Fault Tree analysis and Bayesian Network: DEMO pulsed operation Turbine study case D.N. Dongiovanni, T. Iesmantas https://doi.org/10.1016/j.fusengdes.2016.02.036 Fusion Engineering and Design
2016 EU Implementation of the Chemical PbLi/Water Reaction in the SIMMER Code M. Eboli, A. Del Nevo, N. Forgione https://doi.org/10.1016/j.fusengdes.2016.02.080 Fusion Engineering and Design
2016 EU Issues and Strategies for DEMO In-vessel System Integration C. Bachmann, F. Arbeiter, L. Boccaccini, M. Coleman, G. Federici, U. Fischer, R. Kemp, F. Maviglia, G. Mazzone, P. Pereslavtsev, R. Roccella, N. Taylor, R. Villari, F. Villone, R. Wenninger, J.-H. You https://doi.org/10.1016/j.fusengdes.2016.05.040 Fusion Engineering and Design
2016 EU Limitations of Transient Power Loads on DEMO and Analysis of Mitigation Techniques F. Maviglia, G. Federici, G. Strohmayer, R. Wenninger, C. Bachmann, R. Albanese, R. Ambrosino, M. Li, V.P. Loschiavo, J.H. You, L. Zani https://doi.org/10.1016/j.fusengdes.2016.01.023 Fusion Engineering and Design
2016 EU Multicriteria Selection in Concept Design of a Divertor Remote Maintenance Port in the EU DEMO Reactor using an AHP Participative Approach D. Carfora, G. Di Gironimo, G. Esposito, K. Huhtala, T. Määttä, H. Mäkinen, G. Miccichè, R. Mozzillo https://doi.org/10.1016/j.fusengdes.2016.08.023 Fusion Engineering and Design
2016 EU Neutronic analyses of design issues affecting the tritium breeding performance in different DEMO blanket concepts P. Pereslavtsev, U. Fischer, C. Bachmann https://doi.org/10.1016/j.fusengdes.2015.12.053 Fusion Engineering and Design
2016 EU Neutronic analyses of the preliminary design of a DCLL blanket for the EUROfusion DEMO power plant I. Palermo, I. Fernandez, D. Rapisarda, A. Ibarra https://doi.org/10.1016/j.fusengdes.2016.03.065 Fusion Engineering and Design
2016 EU Neutronic Performance Issues of the Breeding Blanket Options for the European DEMO fusion power plant U. Fischer, C. Bachmann, I. Palermo, P. Pereslavstev, F. Moro https://doi.org/10.1016/j.fusengdes.2015.11.051 Fusion Engineering and Design
2016 EU Neutronics studies for the design of the European DEMO vacuum vessel D. Flammini, R. Villari, F. Moro, C. Bachmann https://doi.org/10.1016/j.fusengdes.2016.01.075 Fusion Engineering and Design
2016 EU Objectives and status of EUROfusion DEMO blanket studies L.V. Boccaccini, G. Aiello, J. Aubert, C. Bachmann, T. Barrett, A. Del Nevo, D. Demange, L. Forest, F. Hernandez, P. Norajitra, G. Porempovic, D. Rapisarda, P. Sardain, M. Utili, L. vala https://doi.org/10.1016/j.fusengdes.2015.12.054 Fusion Engineering and Design
2016 EU On the optimization of the first wall of the DEMO water-cooled lithium lead outboard breeding blanket equatorial module P.A. Di Maio, P. Arena, G. Bongiovi, P. Chiovaro, R. Forte, S. Garitta https://doi.org/10.1016/j.fusengdes.2016.02.103 Fusion Engineering and Design
2016 EU Optimization of the breeder zone cooling tubes of the DEMO Water-Cooled Lithium Lead breeding blanket P.A. Di Maio, P. Arena, G. Bongiovi, P. Chiovaro, A. Del Nevo, R. Forte https://doi.org/10.1016/j.fusengdes.2016.03.021 Fusion Engineering and Design
2016 EU Overview of Progress on the European DEMO Remote Maintenance Strategy O. Crofts, A.Loving, D. Iglesias, M.Coleman, M.Siuko, M.Mittwollen, V.Queral, A.Vale, E.Villedieu https://doi.org/10.1016/j.fusengdes.2015.12.013 Fusion Engineering and Design
2016 EU Overview of the design approach and prioritization of R&D activities towards an EU DEMO G. Federici, C. Bachmann, W. Biel, L. Boccaccini, F. Cismondi, S. Ciattaglia, M. Coleman, C. Day, E. Diegelea, T. Franke, M. Grattarola, H. Hurzlmeier, A. Ibarra, A. Loving, F. Maviglia, B. Meszaros, C. Morlock, M. Rieth, M. Shannon, N. Taylor, M.Q. Tran, J.H. You, R. Wenninger, L.Zani https://doi.org/10.1016/j.fusengdes.2015.11.050 Fusion Engineering and Design
2016 EU Preliminary structural assessment of DEMO vacuum vessel against a vertical displacement event R. Mozzillo, A. Tarallo, D. Marzullo, C. Bachmann, G. Di gironimo, G. Mazzone https://doi.org/10.1016/j.fusengdes.2016.09.017 Fusion Engineering and Design
2016 EU PROCESS: a systems code for fusion power plants – Part 2: Engineering M. Kovari, F. Fox, C. Harrington, R. Kembleton, P. Knight, H. Lux, J. Morris https://doi.org/10.1016/j.fusengdes.2016.01.007 Fusion Engineering and Design
2016 EU Progress in the engineering design and assessment of the European DEMO first wall and divertor plasma facing components T.R. Barrett, G. Ellwood, G. Pérez, M. Kovari, M. Fursdon, F. Domptail, S. Kirk, S.C. Mclntosh, S. Roberts, S. Zheng, L.V. Boccaccini, J.-H. You, C. Bachmann, J. Reiser, M. Rieth, E. Visca, G. Mazzone, F. Arbeiter and P.K. Domalapally https://doi.org/10.1016/j.fusengdes.2016.01.052 Fusion Engineering and Design
2016 EU Safety Issues related to the Intermediate Heat Storage for the DEMO BoP R. Zanino, A. Carpignano, T. Pinna, L. Savoldi, G. Sobrero, A.C. Uggenti https://doi.org/10.1016/j.fusengdes.2016.01.078 Fusion Engineering and Design
2016 EU Scoping studies for NBI launch geometries on DEMO I. Jenkins, C.D. Challis, D.L. Keeling, E. Surrey https://doi.org/10.1016/j.fusengdes.2016.02.077 Fusion Engineering and Design
2016 EU Simulation of hydrogen effect on equilibrium shape of gas bubbles in beryllium D.V. Bachurin, P.V. Vladimirov https://doi.org/10.1016/j.fusengdes.2015.12.004 Fusion Engineering and Design
2016 EU Status on DEMO Helium Cooled Lithium Lead Breeding Blanket thermo-mechanical analyses J. Aubert, G. Aiello, J.-C. Jaboulay, B. Kiss, A. Morin https://doi.org/10.1016/j.fusengdes.2016.01.037 Fusion Engineering and Design
2016 EU Structural design of DEMO Divertor Cassette Body:FEM analysys and introductive application of RCC-MRx rules P. Frosi, G. Mazzone, Y. Jeong-Ha https://doi.org/10.1016/j.fusengdes.2016.03.055 Fusion Engineering and Design
2016 EU Theoretical Studies of MHD Flows in Support to HCLL Design Activities L. Buehler, C. Mistrangelo https://doi.org/10.1016/j.fusengdes.2015.11.010 Fusion Engineering and Design
2016 EU Thermohydraulics of Rib-Roughened Helium Gas Running Cooling Channels for First Wall Applications S. Ruck, S.Arbeiter https://doi.org/10.1016/j.fusengdes.2016.01.029 Fusion Engineering and Design
2016 EU Transient analyses on the cooling channels of the DEMO HCPB blanket concept under accidental conditions Y. Chen, B. Ghidersa, X. Jin, D. Carloni https://doi.org/10.1016/j.fusengdes.2016.01.062 Fusion Engineering and Design
2016 EU Tritium Extraction Technologies and DEMO Requirements D. Demange, R. Antunes, O. Borisevich, L. Frances, D. Rapisarda, A. Santucci, M. Utili https://doi.org/10.1016/j.fusengdes.2016.01.053 Fusion Engineering and Design
2016 EU Tritium release from advanced beryllium materials after loading by tritium/hydrogen gas mixture V. Chakin, R. Rolli, A. Moeslang, P. Kurinskiy, P. Vladimirov, C. Dorn, I. Kupriyanov https://doi.org/10.1016/j.fusengdes.2016.04.018 Fusion Engineering and Design
2016 EU&JA Safety research on fusion DEMO in Japan: Toward development of safety strategy of a water-cooled DEMO M. Nakamura, K. Tobita, Y. Someya, H. Utoh, Y. Sakamoto, W. Gulden https://doi.org/10.1016/j.fusengdes.2015.12.008 Fusion Engineering and Design
2016 EU&JA Safety studies of plasma-wall events with AINA code for Japanese DEMO J.C. Rivas, M. Nakamura, Y. Someya, K. Hoshino, N. Asakura, H. Takase, Y. Miyoshi, H. Utoh, K.Tobita, J. Dies, A.de Blas, A. Riego, M. Fabbri https://doi.org/10.1016/j.fusengdes.2015.10.037 Fusion Engineering and Design
2016 EU&JA Simulation of collisional effects on divertor pumping in JT-60SA C. Gleason-González, S. Varoutis, X. Luo, K. Shimizu, T. Nakano, K. Hoshino, H. Kawashima, N. Asakura, C. Day, S. Sakurai https://doi.org/10.1016/j.fusengdes.2016.02.016 Fusion Engineering and Design
2016 JA Analysis of Plasma Position Control for DEMO Reactor H. Takase, H. Utoh, Y. Sakamoto, K. Mori, T. Kudoa, K. Tobita https://doi.org/10.1016/j.fusengdes.2015.12.016 Fusion Engineering and Design
2016 JA Design concept of conducting shell and in-vessel components suitable for plasma vertical stability and remote maintenance scheme in DEMO reactor H. Utoh, H. Takase, Y. Sakamoto, K. Tobita, K. Mori, T. Kudo, Y. Someya, N. Asakura, K. Hoshino, M. Nakamura, S. Tokunaga https://doi.org/10.1016/j.fusengdes.2015.12.048 Fusion Engineering and Design
2016 JA Influence of hydrogen addition to a sweep gas on tritium behavior in a blanket model containing Li2TiO3pebbles K. Katayama, Y. Someya, K. Tobita, S. Fukada, Y. Hatano and T.Chikada https://doi.org/10.1016/j.fusengdes.2016.08.031 Fusion Engineering and Design
2016 EU Approaches to Analyze Structural Issues of the European DEMO Toroidal Field Coil System at an Early Design Stage A. Panin, W. Biel, Ph. Mertens, F. Nunio, K. Sedlak, L. Zani, and M. Coleman https://doi.org/10.1109/TASC.2016.2516998 IEEE Transactions on Applied Superconductivity
2016 EU Conceptual Design Improvement of a Toroidal Field Coil for EU DEMO using High Temperature Superconductors R. Heller, P. V. Gade, W. H. Fietz, T. Vogel, K. P. Weiss https://doi.org/10.1109/TASC.2016.2520662 IEEE Transactions on Applied Superconductivity
2016 EU Design, Manufacture and Test of a 82 kA React&Wind TF Conductor for DEMO P. Bruzzone, K. Sedlak, B. Stepanov, R. Wesche, L. Muzzi, M. Seri, L. Zani, M. Coleman https://doi.org/10.1109/TASC.2016.2532462 IEEE Transactions on Applied Superconductivity
2016 EU Development of a Thermal-Hydraulic Model for the European DEMO TF Coil R. Zanino, R. Bonifetto, O. Dicuonzo, L. Muzzi, G. F. Nallo, L. Savoldi, S. Turtu’ https://doi.org/10.1109/TASC.2016.2523241 IEEE Transactions on Applied Superconductivity
2016 EU Overview of Progress on the EU DEMO Reactor Magnet System Design L. Zani, C. M. Bayer, M. E. Biancolini, R. Bonifetto, P. Bruzzone, C. Brutti, D. Ciazynski, M. Coleman, I. Duran, M. Eisterer, W. H. Fietz, P. V. Gade, E. Gaio, F. Giorgetti, W. Goldacker, F. Gömöry, X. Granados, R. Heller, P. Hertout, C. Hoa, A. Kario, B. Lacroix, M. Lewandowska, A. Maistrello, L. Muzzi, A. Nijhuis, F. Nunio, A. Panin, T. Petrisor, J.-M. Poncet https://doi.org/10.1109/TASC.2016.2536755 IEEE Transactions on Applied Superconductivity
2016 EU Thermal-hydraulic Analysis of the Low Tc Superconductor (LTS) Winding Pack Design Concepts for the DEMO Toroidal Field (TF) Coil M. Lewandowska, K. Sedlak, L. Zani https://doi.org/10.1109/TASC.2016.2542003 IEEE Transactions on Applied Superconductivity
2016 EU Tools Used at CEA for Designing the DEMO Toroidal Field Coils Winding Pack A. Torre, D. Ciazynski, P. Hertout, L. Zani https://doi.org/10.1109/TASC.2016.2520578 IEEE Transactions on Applied Superconductivity
2016 EU Winding Pack Proposed for the TF and CS Coils of European DEMO R. Wesche, K. Sedlak, N. Bykovsky, P. Bruzzone, L. Zani, M. Coleman https://doi.org/10.1109/TASC.2016.2515941 IEEE Transactions on Applied Superconductivity
2016 EU Analyses of Low- and High-Margin Quench Propagation in the European DEMO TF Coil Winding Pack L. Savoldi, R. Bonifetto, R. Zanino, L. Muzzi https://doi.org/10.1109/TPS.2016.2542920 IEEE Transactions on Plasma Science
2016 EU Effect of the Dome on the Collisional Neutral Gas Flow in the Demo Divertor C. Day, S. Varoutis, Yu. Igitkhanov https://doi.org/10.1109/TPS.2016.2565727 IEEE Transactions on Plasma Science
2016 EU&JA Thermohydraulic Analysis of Accident Scenarios of a Fusion DEMO Reactor Based on Water-Cooled Ceramic Breeder Blanket: Analysis of LOCAs and LOVA M. Nakamura, K. Watanabe, K. Tobita, Y. Someya, H. Tanigawa, H. Utoh, Y. Sakamoto, T. Kunugi, T. Yokomine, W. Gulden https://doi.org/10.1109/TPS.2016.2578348 IEEE Transactions on Plasma Science
2016 EU Ductilisation of tungsten (W) through cold-rolling: R-curve behaviour J. Reiser, S. Wurster, J. Hoffmann, S. Bonk, C. Bonnekoh, D. Kiener, R. Pippan, A. Hoffmann, M. Rieth https://doi.org/10.1016/j.ijrmhm.2016.03.006 International Journal of Refractory Metals and Hard Materials
2016 EU Ductilisation of tungsten (W): On the shift of the brittle-to-ductile transition (BDT) to lower temperatures through cold-rolling J. Reiser, J. Hoffmann, U. Jäntsch, M. Klimenkov, S. Bonk, C. Bonnekoh, M. Rieth, A. Hoffmann, T. Mrotzek https://doi.org/10.1016/j.ijrmhm.2015.09.001 International Journal of Refractory Metals and Hard Materials
2016 EU Concentration dependent hydrogen diffusion in tungsten T. Ahlgren, L. Bukonte https://doi.org/10.1016/j.jnucmat.2016.06.044 Journal of Nuclear Materials
2016 EU The effect of triple ion beam irradiation on cavity formation on pure EFDA iron M. Roldan, P. Fernandez, R.Vila, A. Gómez-Herrero, F.J. Sanchez https://doi.org/10.1016/j.jnucmat.2016.06.043 Journal of Nuclear Materials
2016 EU Ab initio simulations on migration paths of interstitial oxygen in corundum Yu.F. Zhukovskii, A. Platonenko, S. Piskunov, E. A. Kotomin https://doi.org/10.1016/j.nimb.2015.08.087 Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
2016 EU Influence of complex impurity centres on radiation damage in wide-gap metal oxides A. Lushchik, Ch.Lushchik, A.I. Popov, K. Schwartz, E. Shablonin, E. Vasilchenko https://doi.org/10.1016/j.nimb.2015.07.004 Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
2016 EU Kinetics of F center annealing and colloid formation in Al2O3 E. Kotomin, V. N. Kuzovkov, A.I. Popov, R. Vila https://doi.org/10.1016/j.nimb.2015.08.055 Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
2016 EU ANSYS creep-fatigue assessment tool for EUROFER97 components M. Mahler, F. Özkan, J. Aktaa https://doi.org/10.1016/j.nme.2016.05.017 Nuclear Materials and Energy
2016 EU Chemical deposited tungsten fibre-reinforced tungsten – The way to a mock-up for divertor application J. Riesch, J. Almanstoetter, M. Aumann, J.W.Coenen, Y. Han, T. Hoeschen, M. Munoz, Ch.Linsmeier, B. Wendland, P. Zhao, R.Neu https://doi.org/10.1016/j.nme.2016.03.005 Nuclear Materials and Energy
2016 EU Corrosion resistance of Al-based coatings in flowing Pb-15.7Li produced by aluminum electrodeposition from ionic liquids S.E. Wulf, W. Krauss, J. Konys https://doi.org/10.1016/j.nme.2016.03.008 Nuclear Materials and Energy
2016 EU Fe+ ion irradiation induced changes in structural and magnetic properties of iron films K. Mergia, K. Papamichail, F. Ott, Y. Serruys, Th. Speliotis, G. Apostolopoulos https://doi.org/10.1016/j.nme.2016.03.006 Nuclear Materials and Energy
2016 EU Improvement of reduced activation 9%Cr steels by Ausforming J. Hoffmann, M. Rieth, L. Commin, P. Fernandez, M. Roldan https://doi.org/10.1016/j.nme.2015.12.001 Nuclear Materials and Energy
2016 EU Microstructural defects in EUROFER 97 after different neutron irradiation conditions C. Dethloff, E. Gaganidze, J. Aktaa https://doi.org/10.1016/j.nme.2016.05.009 Nuclear Materials and Energy
2016 EU PKA distributions: contributions from transmutation products and from radioactive decay M.R. Gilbert https://doi.org/10.1016/j.nme.2016.02.006 Nuclear Materials and Energy
2016 EU Simulation of nanostructural evolution under irradiation in Fe-9%Cr-C alloys: an object kinetic Monte Carlo study of the effect of temperature and dose-rate M. Chiapetto, C.S. Becquart, L. Malerba https://doi.org/10.1016/j.nme.2016.04.009 Nuclear Materials and Energy
2016 EU The influence of carbon on the resistivity recovery of proton irradiated Fe–11 at.% Cr alloys G. Apostolopoulos, V. Lukianova, Z. Kotsina, A. Lagoyannis, K. Mergia, S. Harissopoulos, S. Messoloras https://doi.org/10.1016/j.nme.2016.09.007 Nuclear Materials and Energy
2016 EU Development of tungsten fibre-reinforced tungsten composites towards their use in DEMO – potassium doped tungsten wire J. Riesch, J. Coenen, T. Höschen, B. Jasper, P. Zhao, Y. Han, Ch. Linsmeier, R. Neu https://doi.org/10.1088/0031-8949/T167/1/014006 Physica Scripta
2016 EU Manufacturing and Characterization of PIM-W Materials as Plasma Facing Materials G. Pintsuk, S. Antusch, M. Rieth, M. Wirtz https://doi.org/10.1088/0031-8949/T167/1/014056 Physica Scripta
2016 EU Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes A. Calvo, N. Ordás, I. Iturriza, J.Y. Pastor, E. Tejado, T. Palacios, C. Garcia-Rosales https://doi.org/10.1088/0031-8949/T167/1/014041 Physica Scripta
2016 EU Materials for DEMO and reactor applications – Boundary condition and new concepts J.W. Coenen, S. Antusch, M. Aumann, W. Biel, J. Du, J. Engels, S. Heuer, A. Houben, T. Hoeschen, B. Jasper, F. Koch, J. Linke, A. Litnovsky, Y. Mao, R. Neu, G. Pintsuk, J. Riesch, M. Rasinski, J. Reiser, M. Rieth, A. Terra, B. Unterberg, Th. Weber, T. Wegener, J.-H. You and Ch. Linsmeier https://doi.org/10.1088/0031-8949/2016/T167/014002 Physica Scripta
2016 EU Primary damage in tungsten using the binary collision approximation, molecular dynamic simulations and the density functional theory A. De Backer, A. Sand, C.J. Ortiz, C. Domain, P. Olsson, C.S. Becquart https://doi.org/10.1088/0031-8949/T167/1/014018 Physica Scripta
2016 EU Thermal Shock Tests to Qualify Different Tungsten Grades as Plasma Facing Material M. Wirtz, J. Linke, T. Loewenhoff, G. Pintsuk, I. Uytdenhouwen https://doi.org/10.1088/0031-8949/T167/1/014015 Physica Scripta
2016 EU Electron elevator: Excitations across the band gap via a dynamical gap state A. Lim, W. Foulkes, A. Horsfield, D. Mason, A. Schleife, E. Draeger and A. Correa https://doi.org/10.1103/PhysRevLett.116.043201 Physical Review Letters
2016 EU Magneto-convective instabilities in horizontal cavities C. Mistrangelo, L. Buehler https://doi.org/10.1063/1.4940788 Physics of Fluids
2016 JA Conceptual design of temporary storage area in hot cell for fusion DEMO reactor M. Kondo, Y. Someya, M. Tsuji, S. Yanagihara, H. Utoh, T. Kato, K. Tobita, S. Matsuda https://doi.org/10.1585/pfr.11.2405077 Plasma and Fusion Research
2016 JA Particle pinch model of passing/trapped high-Z impurity with centrifugal force effect Y. Shimizu, T. Fujita, A. Okamoto, H. Arimoto, T. Nakano, K. Hoshino, N. Hayashi, M. Honda https://doi.org/10.1585/pfr.11.2403082 Plasma and Fusion Research
2016 EU A 0D stationary model for the evaluation of the degree of detachment on the divertor plates M. Siccinio, E. Fable, K. Lackner, A. Scarabosio, R.P. Wenninger and H. Zohm https://doi.org/10.1088/0741-3335/58/12/125011 Plasma Physics and Controlled Fusion
2016 EU Radiation and confinement in 0D fusion systems codes H. Lux, R. Kemp, E. Fable, R. Wenninger https://doi.org/10.1088/0741-3335/58/7/075001 Plasma Physics and Controlled Fusion
2016 EU Dynamic thermal-hydraulic modelling of the EU DEMO HCPB breeding blanket cooling loops A. Froio, C. Bachmann, F. Cismondi, L. Savoldi, R. Zanino https://doi.org/10.1016/j.pnucene.2016.08.007 Progress in Nuclear Energy
2016 EU Mechanical reinforcement for RACC cables in high magnetic background fields C.M. Bayer, P.V. Gade, C. Barth, A. Preuß, A. Jung, K.P. Weiß https://doi.org/10.1088/0953-2048/29/2/025007 Superconductor Science and Technology
2016 EU Gas flow towards an adsorbing planar wall subject to partial gas-surface thermal accommodation C. Tantos, S. Naris, D.Valougeorgis https://doi.org/10.1016/j.vacuum.2015.12.002 Vacuum
2015 EU Surface-induced vacancy loops and damage dispersion in irradiated Fe thin films M.J. Aliaga, R. Schäublin, J. F. Löffler, M.J. Caturla https://doi.org/10.1016/j.actamat.2015.08.063 Acta Materialia
2015 EU Ion source development for a Photoneutralization based NBI system of Fusion reactors A. Simonin, H.P.L. De-Esch, P. Garibaldi, C. Grand, S. Bechu, A. Bès, A. Lacoste https://doi.org/10.1063/1.4916459 AIP Conference Proceedings
2015 EU Development of mode conversion waveguides at KIT J. Jin, G. Gantenbein, J. Jelonnek, T. Rzesnicki, M. Thumm https://doi.org/10.1051/epjconf/20158704003 EPJ Web of Conferences
2015 EU Direct observation of size scaling and elastic interaction between nano-scale defects in collision cascades X. Yi, A.E. Sand, D.R. Mason, M.A. Kirk, S.G. Roberts, K. Nordlund, S.L. Dudarev https://doi.org/10.1209/0295-5075/110/36001 Europhysics Letters
2015 EU An approach to verification and validation of MHD codes for fusion applications S. Smolentsev, S. Badia, R. Bhattacharyay, L. Buehler, L. Chen, Q. Huang, H.-G. Jin, D. Krasnov, D.-W. Lee, E. Mas de les Valls, C. Mistrangelo, R. Munipalli, M.-J. Ni, D. Pashkevich, A. Patel, G. Pulugundla, P. Satyamurthy, A. Snegirev, V. Sviridov, P. Swain, T. Zhou, and O. Zikanov https://doi.org/10.1016/j.fusengdes.2014.04.049 Fusion Engineering and Design
2015 EU Assessment of ex-vessel movers in remote maintenance systems of DEMO A. Vale https://doi.org/10.1016/j.fusengdes.2015.06.158 Fusion Engineering and Design
2015 EU Assessment of W7-X Plasma Vessel Pressurisation In Case of LOCATaking Into Account In-Vessel Components E. Urbonavicius, M. Povilaitis, A. Kontautas https://doi.org/10.1016/j.fusengdes.2015.08.001 Fusion Engineering and Design
2015 EU Basic considerations on the pump-down time in the dwell phase of a pulsed fusion DEMO K. Battes, C. Day, V. Rohde https://doi.org/10.1016/j.fusengdes.2015.07.011 Fusion Engineering and Design
2015 EU Considerations on the DEMO pellet fuelling system P.T. Lang, Ch. Day, E. Fable, Y. Igitkhanov, F. Köchl, R. Mooney, B. Pegourie, B. Plöckl, R. Wenninger, H. Zohm https://doi.org/10.1016/j.fusengdes.2015.04.014 Fusion Engineering and Design
2015 EU Definition of the basic DEMO tokamak geometry based on systems code studies B. Meszaros, C. Bachmann, R. Kemp, G. Federici https://doi.org/10.1016/j.fusengdes.2015.06.097 Fusion Engineering and Design
2015 EU DEMO diagnostics and burn control W. Biel, M. de Baar, A. Dinklage, F. Felici, R. Koenig, H. Meister, W. Treutterer, R. Wenninger https://doi.org/10.1016/j.fusengdes.2015.01.046 Fusion Engineering and Design
2015 EU Development of a Zonal Applicability Tool for Remote Handling Equipment in DEMO V. Madzharov, M. Mittwollen, D. Leichtle, G. Hermon https://doi.org/10.1016/j.fusengdes.2015.06.057 Fusion Engineering and Design
2015 EU Divertor Remote Handling for DEMO: concept design and preliminary FMECA studies D. Carfora, G. Di Gironimo, J. Järvenpää, T. Määttä. K. Huhtala, M. Siuko https://doi.org/10.1016/j.fusengdes.2015.06.056 Fusion Engineering and Design
2015 EU Dynamic Modelling of Balance of Plant Systems for a Pulsed DEMO Power Plant C. Harrington https://doi.org/10.1016/j.fusengdes.2015.03.029 Fusion Engineering and Design
2015 EU Electromagnetic and mechanical analysis of a toroidal field coil winding pack for EU DEMO P. Gade, C. Bayer, W. H. Fietz, R. Heller, K. P. Weiss https://doi.org/10.1016/j.fusengdes.2015.06.165 Fusion Engineering and Design
2015 EU Experimental study of instabilities in magnetohydrodynamic boundary layers V. Chowdhury, L. Buehler, C. Mistrangelo, and H.-J. Brinkmann https://doi.org/10.1016/j.fusengdes.2015.02.027 Fusion Engineering and Design
2015 EU Experimental study of permeation and selectivity of different inorganic membrane for tritium processes O. Borisevich, R. Antunes, D. Demange https://doi.org/10.1016/j.fusengdes.2015.04.015 Fusion Engineering and Design
2015 EU Facilities, testing program and modeling needs for studying liquid metal magnetohydrodynamic flows in fusion blankets L. Buehler, C. Mistrangelo, J. Konys, R. Bhattacharyay, Q. Huang, D. Obukhov, S. Smolentsev, and M. Utili https://doi.org/10.1016/j.fusengdes.2014.03.078 Fusion Engineering and Design
2015 EU First disruption studies and simulations in view of the development of the DEMO Physics Basis G. Ramogida, G. Maddaluno, F. Villone, R. Albanese, L. Barbato, F. Crisanti, S. Mastrostefano, R. Mazzuca, R. Palmaccio, G. Rubinacci, S. Ventre, R. Wenninger https://doi.org/10.1016/j.fusengdes.2015.06.172 Fusion Engineering and Design
2015 EU Implications of toroidal field coil stress limits on power plant design using PROCESS J. Morris, R. Kemp, M. Kovari, J. Last, P. Knight https://doi.org/10.1016/j.fusengdes.2015.06.100 Fusion Engineering and Design
2015 EU Impurity Radiation in DEMO systems modelling H. Lux, R. Kemp, D. J. Ward, M. Sertoli https://doi.org/10.1016/j.fusengdes.2015.10.002 Fusion Engineering and Design
2015 EU Initial DEMO tokamak design configuration studies C. Bachmann, G. Aiello, R. Albanese, R. Ambrosino, F. Arbeiter, J. Aubert, L. Boccaccini, D. Carloni, G. Federici, U. Fischer, M. Kovari, A. Li Puma, A. Loving, I. Maione, M. Mattei, G. Mazzone, B.Meszaros, I. Palermo, P. Pereslavtsev, V. Riccardo, P. Sardain, N. Taylor, S. Villari, Z. Vizvary, A. Vaccaro, E. Visca, R. Wenninger https://doi.org/10.1016/j.fusengdes.2015.05.027 Fusion Engineering and Design
2015 EU Interpretation of the deep cracking phenomenon of tungsten monoblock targets observed in high-heat-flux fatigue tests at 20 MW/m2 M. Li, J.H. You https://doi.org/10.1016/j.fusengdes.2015.09.008 Fusion Engineering and Design
2015 EU Magnetohydrodynamic flow in ducts with discontinuous electrical insulation C. Mistrangelo, L. Buehler https://doi.org/10.1016/j.fusengdes.2015.04.009 Fusion Engineering and Design
2015 EU Neutronics Requirements for a DEMO Fusion Power Plant U. Fischer, C. Bachmann, I. Palermo, P. Pereslavtsev, R. Villari https://doi.org/10.1016/j.fusengdes.2015.02.029 Fusion Engineering and Design
2015 EU Overview on ITER and DEMO blanket fabrication activities of the KIT INR and related frameworks H. Neuberger, J. Rey, A. Weth, F. Hernandez, T. Martin, M. Zmitko, A. Felde, R. Niewöhner, F. Krüger https://doi.org/10.1016/j.fusengdes.2015.06.174 Fusion Engineering and Design
2015 EU Remote Handling Assessment of Attachment Concepts for DEMO Blanket Segments D. Iglesias, R. Bastow, D. Cooper, R. Crowe, D. Middleton-Gear, R. Sibois, D. Carloni, Z. Vizvary, O. Crofts, J. Harman, A. Loving https://doi.org/10.1016/j.fusengdes.2015.06.176 Fusion Engineering and Design
2015 EU Technological and physics assessments on heating and current drivesystems for DEMO T. Franke, E. Barbatoc, G. Bosia, A. Cardinali, S. Ceccuzzi, R. Cesario, D. Van Eester, G. Federici, G. Gantenbein, W. Helou, J. Hillairet, I. Jenkins, Y.O. Kazakov, R. Kemp, E. Lerche, F. Mirizzi, J.-M. Noterdaeme, E. Poli, L. Porte, G.L. Ravera, E. Surrey, G. Tardini, M.Q. Tran, C. Tsironis, A.A. Tuccillo, R. Wenninger, H. Zohm, the EFDA PPP&T Team https://doi.org/10.1016/j.fusengdes.2014.12.036 Fusion Engineering and Design
2015 EU Testing candidate interlayers for an enhanced water-cooled divertor target D. Hancock, T. Barett, J. Foster, M. Fursdon, G. Keech, S. McIntosh, W. Timmis, M. Rieth, J. Reiser https://doi.org/10.1016/j.fusengdes.2014.12.026 Fusion Engineering and Design
2015 EU The enhanced pellet centrifuge launcher at ASDEX Upgrade: advanced operation and application as technology test facility for ITER and DEMO B. Ploeckl, Chr. Day, Ph. Lamalle, P. T. Lang, V. Rohde, E. Viezzer and ASDEX Upgrade team https://doi.org/10.1016/j.fusengdes.2015.01.006 Fusion Engineering and Design
2015 JA A system dynamics model for stock and flow of tritium in fusion power plant R. Kasada, S. Kwon, S. Konishi, Y. Sakamoto, T. Yamanishi, K. Tobita https://doi.org/10.1016/j.fusengdes.2015.03.047 Fusion Engineering and Design
2015 JA Comparative evaluation of remote maintenance schemes for fusion DEMO reactor H. Utoh, K. Tobita, Y. Someya, N. Asakura, Y. Sakamoto, K. Hoshino, M. Nakamura https://doi.org/10.1016/j.fusengdes.2015.06.139 Fusion Engineering and Design
2015 JA Design study of blanket structure based on a water-cooled solid breeder for DEMO Y. Someya, K. Tobita, H. Utoh, S. Tokunaga, K. Hoshino, N. Asakura, M. Nakamura, Y. Sakamoto https://doi.org/10.1016/j.fusengdes.2015.05.042 Fusion Engineering and Design
2015 EU Conceptual design of the mechanical tritium pumping system for JET DTE2 T. Giegerich, N. Bekris, B. Butler, C. Day, M. Gethins, S. Lesnoj, X. Luo, R. Müller, S. Ochoa, P. Pfeil, R. Smith, JET Contributors https://doi.org/10.13182/FST14-950 Fusion Science and Technology
2015 JA Management Strategy for Radioactive Waste in the Fusion DEMO Reactor Y. Someya, K. Tobita, H. Utoh, N. Asakura, Y. Sakamoto, K. Hoshino, M. Nakamura, S. Tokunaga https://doi.org/10.13182/FST15-101 Fusion Science and Technology
2015 EU Assessment studies and manufacturing trials for the conductors of DEMO TF coils L. Muzzi, A. Anemona, A. Della Corte, A. Di Zenobio, S. Turtù, P. Bruzzone, K. Sedlak, B. Stepanov, C. Brutti, M.E. Biancolini, L. Reccia, and J. Harman https://doi.org/10.1109/TASC.2014.2360561 IEEE Transactions on Applied Superconductivity
2015 EU Influence of the notch root radius on the fracture toughness of brittle metals: nanostructure tungsten alloy, a case study T. Palacios, J.Y. Pastor https://doi.org/10.1016/j.ijrmhm.2015.05.012 International Journal of Refractory Metals and Hard Materials
2015 EU Tungsten laminates made of ultrafine-grained (UFG) tungsten foil – Ageing of tungsten-titanium (W-Ti) laminates J. Reiser, P. Franke, T. Weingärtner, J. Hoffmann, A. Hoffmann, M. Rieth https://doi.org/10.1016/j.ijrmhm.2015.04.032 International Journal of Refractory Metals and Hard Materials
2015 EU Modelling of Ingress of Coolant Event into Vacuum Experiments with ASTEC Code T. Kacegavicius, E. Urbonavicius https://doi.org/10.1007/s10894-014-9804-4 Journal of Fusion Energy
2015 EU Modelling of Water Ingress into Vacuum Vessel Experiments Using RELAP5 Code T. Kaliatka, E. Uspuras, A. Kaliatka https://doi.org/10.1007/s10894-014-9790-6 Journal of Fusion Energy
2015 EU Effect of Cr content on the nanostructural evolution of irradiated ferritic/martensitic alloys: an object kinetic Monte Carlo model M. Chiapetto, L. Malerba, C.S. Becquart https://doi.org/10.1016/j.jnucmat.2015.06.012 Journal of Nuclear Materials
2015 EU Energy spectra of primary knock-on atoms under neutron irradiation M.R. Gilbert, J. Marian, J.-Ch. Sublet https://doi.org/10.1016/j.jnucmat.2015.09.023 Journal of Nuclear Materials
2015 EU Interaction of dislocations with carbides in BCC Fe studied by molecular dynamic F. Granberg, D. Terentyev, K. Nordlund https://doi.org/10.1016/j.jnucmat.2015.01.064 Journal of Nuclear Materials
2015 EU Mitigation of the divertor heat load in DEMO reactor by impurity seeding I. Ivanova-Stanik, R. Zagorski https://doi.org/10.1016/j.jnucmat.2014.11.105 Journal of Nuclear Materials
2015 EU Model-Based Radiation Scalings for the ITER-like Divertors of JET and ASDEX Upgrade L. Aho-Mantila, X. Bonnin, D.P. Coster, C. Lowry, M. Wischmeier, S. Brezinsek, G. Federici, the ASDEX Upgrade Team and the JET-EFDA Contributors https://doi.org/10.1016/j.jnucmat.2014.11.049 Journal of Nuclear Materials
2015 EU Modelling irradiation-induced softening in BCC Iron by crystal plasticity approach X. Xiao, D. Terentyev, L. Yu, D. Song, A. Bakaev, H. Duan https://doi.org/10.1016/j.jnucmat.2015.08.017 Journal of Nuclear Materials
2015 EU On the lower energy limit of electronic stopping in simulated collision cascades in Ni, Pd and Pt A. E. Sand, K. Nordlund https://doi.org/10.1016/j.jnucmat.2014.09.029 Journal of Nuclear Materials
2015 EU The effects of tantalum addition on the microtexture and mechanical behaviour of tungsten for ITER applications E. Tejado, P.A. Carvalho, A. Munoz, M. Dias, J.B. Correia, U.V. Mardolcar, J.Y. Pastor https://doi.org/10.1016/j.jnucmat.2015.10.034 Journal of Nuclear Materials
2015 JA Simulation study of power load with impurity seeding in advanced divertor “short super-X divertor” for a tokamak reactor N. Asakura, K. Hoshino, K. Shimizu, K. Shinya, H. Utoh, S. Tokunaga, K. Tobita, N. Ohno https://doi.org/10.1016/j.jnucmat.2015.01.068 Journal of Nuclear Materials
2015 JA The influence of the radial particle transport on the divertor plasma detachment K. Hoshino, K. Shimizu, T. Takizuka, N. Asakura, T. Nakano https://doi.org/10.1016/j.jnucmat.2014.11.133 Journal of Nuclear Materials
2015 EU Incorporating non-adiabatic effects in embedded atom potentials for radiation damage cascade simulations D. Mason https://doi.org/10.1088/0953-8984/27/14/145401 Journal of Physics: Condensed Matter
2015 EU Dislocation-mediated strain hardening in tungsten: thermo-mechanical plasticity theory and experimental validation D. Terentyev, X. Xiao, A. Dubinko, A. Bakaeva, H. Duan https://doi.org/10.1016/j.jmps.2015.08.015 Journal of the Mechanics and Physics of Solids
2015 EU Magneto convective instabilities driven by internal uniform volumetric heating C. Mistrangelo and L. Buehler http://mhd.sal.lv/contents/2015/2/MG.51.2.14.R.html Magnetohydrodynamics
2015 EU MHD issues related to the use of lithium lead eutectic as breeder material for blankets of fusion power plants G. Aiello, C. Mistrangelo, L. Buehler, E. Mas de les Valls, J. Aubert, A. Li Puma, D. Rapisarda, and A. Del Nevo http://mhd.sal.lv/contents/2015/2/MG.51.2.2.R.html Magnetohydrodynamics
2015 EU Validity of quasi-2D models for magneto-convection L. Buehler, C. Mistrangelo, and S. Molokov http://mhd.sal.lv/contents/2015/2/MG.51.2.16.R.html Magnetohydrodynamics
2015 EU Powder Metallurgical Tungsten Fiber-Reinforced Tungsten B. Jasper, B. Jasper, S. Schoenen, J. Du, T. Hoeschen, C. Linsmeier, R. Neu, J. Riesch, A. Terra and J.W. Coenen https://doi.org/10.4028/www.scientific.net/MSF.825-826.125 Materials Science Forum
2015 EU A generic mode selection strategy for high-order mode gyrotrons operating at multiple frequencies J. Franck, K. Avramidis, G. Gantenbein, S. Illy, J. Jianbo, M. Thumm, J. Jelonnek https://doi.org/10.1088/0029-5515/55/1/013005 Nuclear Fusion
2015 EU A review on two previous divertor target concepts for DEMO: Mutual impact between structural design requirements and materials performance J.H. You https://doi.org/10.1088/0029-5515/55/11/113026 Nuclear Fusion
2015 EU Advances in the physics basis for the European DEMO design R. Wenninger, F. Arbeiter, J. Aubert, L. Aho-Mantila, R. Albanese, R. Ambrosino, C. Angioni, J.-F. Artaud, M. Bernert, E. Fable, A. Fasoli, G. Federici, J. Garcia, G. Giruzzi, F. Jenko, P. Maget, M. Mattei, F. Maviglia, E. Poli, G. Ramogida, C. Reux, M. Schneider, B. Sieglin, F. Villone, M. Wischmeier and H. Zohm https://doi.org/10.1088/0029-5515/55/6/063003 Nuclear Fusion
2015 EU DEMO reactor design using the new modular system code SYCOMORE C. Reux, L. Di Gallo, F. Imbeaux, J.-F. Artaud, P. Bernardi, J. Bucalossi, G. Ciraolo, J.-L. Duchateau, C. Fausser, D. Galassi, P. Hertout, J.-C. Jaboulay, A. Li-Puma, B. Saoutic, L. Zani and ITM-TF Contributors https://doi.org/10.1088/0029-5515/55/7/073011 Nuclear Fusion
2015 EU Fuelling and density control for DEMO P. Vincenzi, F. Koechl, L. Garzotti, D. B. King, E. Tindale, T. Bolzonella, P. T. Lang, B. Pegourié, M. Romanelli and R. Wenninger https://doi.org/10.1088/0029-5515/55/11/113028 Nuclear Fusion
2015 EU Influence of the divertor plate material on the plasma performance in DEMO I. Ivanova-Stanik, R. Zagórski https://doi.org/10.1088/0029-5515/55/7/073034 Nuclear Fusion
2015 EU Modelling of pulsed and steady-state DEMO scenarios G. Giruzzi, J.F. Artaud, M. Baruzzo, T. Bolzonella, E. Fable, L. Garzotti, I. Ivanova-Stanik, R. Kemp, D.B. King, M. Schneider, R. Stankiewicz, W. Stępniewski, P. Vincenzi, D. Ward and R. Zagórski https://doi.org/10.1088/0029-5515/55/7/073002 Nuclear Fusion
2015 EU&JA Thermohydraulic responses of a water-cooled tokamak fusion DEMO to loss-of-coolant accidents M. Nakamura, K. Tobita, Y. Someya, H. Tanigawa, H. Utoh, Y. Sakamoto, W. Gulden https://doi.org/10.1088/0029-5515/55/12/123008 Nuclear Fusion
2015 EU Copper matrix composites as heat sink materials for water-cooled divertor target J.H. You https://doi.org/10.1016/j.nme.2015.10.001 Nuclear Materials and Energy
2015 EU Constrained Density Functional for Non-Collinear Magnetism P.W. Ma, S. L. Dudarev https://doi.org/10.1103/PhysRevB.91.054420 Physical Review B
2015 EU Three-dimensional modeling of a negative ion source with a magnetic filter: impact of biasing the plasma electrode on the plasma asymmetry G. Fubian, J.P. Boeuf https://doi.org/10.1088/0963-0252/24/5/055001 Plasma Sources Science and Technology
2015 EU Design Progress of the DEMO Divertor Locking System According to IPADeP Methodology D. Marzullo, G. Di Gironimo, A. Lanzotti, G. Mazzone, R. Mozzillo https://doi.org/10.1016/j.procir.2015.07.015 Procedia CIRP
2015 EU Thermal-Hydraulic Assessment of W7-X Plasma Vessel Venting System in Case of 40 mm In-Vessel LOCA E. Urbonavicius, T. Kaliatka https://doi.org/10.1155/2015/240368 Science and Technology of Nuclear Installations
2015 EU Non-Contact Measurement of Thermal Diffusivity in Ion-Implanted F. Hofmann, D.R. Mason, J.K. Eliason, A.A. Maznev, K.A. Nelson, S.L. Dudarev https://doi.org/10.1038/srep16042 Scientific Reports
2015 EU Evolution of dislocation loops in iron under irradiation: The impact of carbon D. Terentyev, I. Martin-Bragado https://doi.org/10.1016/j.scriptamat.2014.10.021 Scripta Materialia
2015 EU Suitability of coated conductors for fusion magnets in view of their radiation response R. Prokopec, D.X. Fischer, H.W. Weber and M. Eisterer https://doi.org/10.1088/0953-2048/28/1/014005 Superconductor Science and Technology
2014 EU 2 MW, 170 GHz Coaxial-Cavity Short-Pulse Gyrotron, – single stage depressed collector operation T. Rzesnicki, G. Gantenbein, J. Jelonnek, J. Jin, I. Gr. Pagonakis, B. Piosczyk, A. Samartsev, A. Schlaich, M. Thumm https://doi.org/10.1109/IRMMW-THz.2014.6956471 2014 39th International Conference on Infrared, Millimeter, and Terahertz waves (IRMMW-THz)
2014 EU Development of advanced gyrotrons J. Jelonnek, K. Avramidis, J. Franck, G. Gantenbein, K. Hesch, J. Jin, P. Kalaria, A. Malygin, I.Gr. Pagonakis, T. Rzesnicki, S. Ruess, A. Samartsev, M. Schmid, T. Scherer, D. Strauss, M. Thumm, C.Wu, J. Zhang https://doi.org/10.1109/IRMMW-THz.2014.6956447 2014 39th International Conference on Infrared, Millimeter, and Terahertz waves (IRMMW-THz)
2014 EU Effective Cavity Length of High-Power Gyrotrons M. Thumm https://doi.org/10.1109/IRMMW-THz.2014.6956472 2014 39th International Conference on Infrared, Millimeter, and Terahertz waves (IRMMW-THz)
2014 EU Limit on reduction of the Power Load to target Plates for DEMO Reactor R. Stankiewicz, W. Stepniewski https://doi.org/10.1002/ctpp.201410022 Contributions to Plasma Physics
2014 JA Development of the Backflow Model for Simplified Impurity Exhaust in Monte‐Carlo Calculation K. Hoshino, K. Shimizu, H. Kawashima, T. Takizuka, T. Nakano, S. Ide https://doi.org/10.1002/ctpp.201410032 Contributions to Plasma Physics
2014 EU Concept for a vertical maintenance remote handling system for multi module blanket segments in DEMO M. Coleman, N. Sykes, D. Cooper, D. Iglesias, R. Bastow, A. Loving, J. Harman https://doi.org/10.1016/j.fusengdes.2014.02.047 Fusion Engineering and Design
2014 EU DEMO Active Maintenance Facility conept progress 2012 J. Thomas, A. Loving, O. Crofts, R. Morgan, J. Harman https://doi.org/10.1016/j.fusengdes.2014.01.018 Fusion Engineering and Design
2014 EU Design of a water cooled monoblock divertor for DEMO using Eurofer as structural material M. Richou, A. Li-Puma, E. Visca https://doi.org/10.1016/j.fusengdes.2014.04.019 Fusion Engineering and Design
2014 EU Development of the Helium Cooled Lithium Lead blanket for DEMO G. Aiello, J. Aubert, N. Jonquères, A. Li Puma, A. Morin, G. Rampal https://doi.org/10.1016/j.fusengdes.2013.12.036 Fusion Engineering and Design
2014 EU Development of the water cooled lithium lead blanket for DEMO J. Aubert, G. Aiello, N. Jonquèresa, A. Li Puma, A. Morin, G. Rampal https://doi.org/10.1016/j.fusengdes.2014.01.061 Fusion Engineering and Design
2014 EU Improved algorithms and advanced features of the CAD to MC conversion tool McCad L. Lu, U. Fischer, P. Pereslavtsev https://doi.org/10.1016/j.fusengdes.2014.05.015 Fusion Engineering and Design
2014 EU Influence of magnetic field deformation by ferromagnetic wall materials on MHD flows in pipes and ducts of fusion blankets S. Ehrhard, L. Buehler https://doi.org/10.1016/j.fusengdes.2013.12.035 Fusion Engineering and Design
2014 EU Lessons learnt from ITER safety & licensing for DEMO and future nuclear fusion facilities N. Taylor, P. Cortes https://doi.org/10.1016/j.fusengdes.2013.12.030 Fusion Engineering and Design
2014 EU Maintenance duration estimate for a DEMO fusion power plant, based on the EFDA-WP12 pre-conceptual studies O. Crofts, J. Harman https://doi.org/10.1016/j.fusengdes.2014.01.038 Fusion Engineering and Design
2014 EU Manufacturing and joining technologies for helium cooled divertors J. Aktaa, W.W. Basuki, T. Weber, P. Norajitra, W. Krauss, J. Konys https://doi.org/10.1016/j.fusengdes.2014.01.028 Fusion Engineering and Design
2014 EU Materials R&D for a timely DEMO: Key findings and recommendations of the EU Roadmap Materials Assessment Group D. Stork, P. Agostini, J.-L. Boutard, D. Buckthorpe, E. Diegele, S. L. Dudarev, C. English, G. Federici, M.R. Gilbert, S. Gonzalez, A. Ibarra, C. Linsmeier, A. Li Puma, G. Marbach, L.W. Packer, B. Raj, M. Rieth, M.Q. Tran, D.J. Ward, S.J. Zinkle https://doi.org/10.1016/j.fusengdes.2013.11.007 Fusion Engineering and Design
2014 EU Neutronic analyses and tools development efforts in the European DEMO programme U. Fischer, C. Bachmann, B. Bienkowska, J.P. Catalan, K. Drozdowicz, D. Dworak, D. Leichtlea, I. Lengar, J.-C. Jaboulay, L. Lu, F. Moro, F. Mota, J. Sanz, M. Szieberth, I. Palermo, R. Pampin, M. Porton, P. Pereslavtsev, F. Ogando, I. Rovni, G. Tracz, R. Villari, S. Zhengk https://doi.org/10.1016/j.fusengdes.2014.02.013 Fusion Engineering and Design
2014 EU Non-linear failure analysis of HCPB blanket for DEMO taking into account high dose irradiation J. Aktaa, S. Kecskés, P. Pereslavtsev, U. Fischer, L.V. Boccaccini https://doi.org/10.1016/j.fusengdes.2014.02.053 Fusion Engineering and Design
2014 EU On the numerical assessment of the thermo-mechanical performances of the DEMO Helium-Cooled Pebble Bed breeding blanket module P.A. Di Maio, P. Arena, L.V. Boccaccini, G. Bongiovì, D. Carloni, P. Chiovaro, R. Giammusso, S. Kecskes, G. Vella https://doi.org/10.1016/j.fusengdes.2014.01.020 Fusion Engineering and Design
2014 EU Overview of EU DEMO Design and R&D Activities G. Federici, R. Kemp, D. Ward, C. Bachmann, T. Franke, S. Gonzalez, C. Lowry, M. Gadomska, J. Harman, B. Meszaros, C. Morlock, F. Romanelli, R. Wenninger https://doi.org/10.1016/j.fusengdes.2014.01.070 Fusion Engineering and Design
2014 EU Pre-conceptual design assessment of DEMO remote maintenance A. Loving, O. Crofts, N. Sykes, D. Iglesias, M. Coleman, J. Thomas, J. Harman, U. Fischer, J. Sanz, M. Suiko, M. Mittwollen https://doi.org/10.1016/j.fusengdes.2014.04.082 Fusion Engineering and Design
2014 EU Pre-conceptual studies and R&D for DEMO superconducting magnets P. Bruzzone https://doi.org/10.1016/j.fusengdes.2013.12.031 Fusion Engineering and Design
2014 EU Preliminary concept design of the divertor remote handling system for DEMO power plant D. Carfora, G. Di Gironimo, J. Järvenpää, T. Määttä. K. Huhtala, M. Siuko. https://doi.org/10.1016/j.fusengdes.2014.07.016 Fusion Engineering and Design
2014 EU Requirements for helium cooled pebble bed blanket and R&D activities D. Carloni, L.V. Boccaccini, F. Franza, S. Kecskes https://doi.org/10.1016/j.fusengdes.2014.02.036 Fusion Engineering and Design
2014 EU Technical analysis of an early fusion neutron source based on the enhancement of the IFMIF/EVEDA accelerator prototype R. Heidinger, A.Ibarra, P.Barabaschi, P.Cara, A.Mosnier, F.Mota, F.S.Nitti https://doi.org/10.1016/j.fusengdes.2014.03.085 Fusion Engineering and Design
2014 EU Technologies and modelling issues for tritium processing in the European Test Blanket Systems and perspectives for DEMO I. Ricapito, P.Calderoni, Y.Poitevin, A.Aiello https://doi.org/10.1016/j.fusengdes.2013.12.028 Fusion Engineering and Design
2014 EU The KALPUREX-process – A new vacuum pumping process for exhaust gases in fusion power plants T. Giegerich, C. Day https://doi.org/10.1016/j.fusengdes.2014.03.082 Fusion Engineering and Design
2014 EU&JA DEMO design activities in the broader approach under Japan/EU collaboration K. Okano, G. Federici, K. Tobita https://doi.org/10.1016/j.fusengdes.2014.04.005 Fusion Engineering and Design
2014 EU&JA Research and development status on fusion DEMO reactor design under the Broader Approach K. Tobita, G. Federici, K. Okano, and The BA DEMO Design Activity Unit https://doi.org/10.1016/j.fusengdes.2014.02.077 Fusion Engineering and Design
2014 EU&JA Study of safety features and accident scenarios in a fusion DEMO reactor M. Nakamura, K. Tobita, W. Gulden, K. Watanabe, Y. Someya, H. Tanigawa, Y. Sakamoto, T. Araki, H. Matsumiya, K. Ishii, H. Utoh, H. Takase, T. Hayashi, A. Satou, T. Yonomoto, G. Federici, K. Okano https://doi.org/10.1016/j.fusengdes.2014.04.062 Fusion Engineering and Design
2014 JA Application of inter-linked superconducting coils for central solenoid and advanced divertor configuration of DEMO H. Utoh, N. Asakura, K. Tobita, Y. Someya, Y. Sakamoto, K. Hoshino, M. Nakamura https://doi.org/10.1016/j.fusengdes.2014.03.011 Fusion Engineering and Design
2014 JA Evaluation of remote maintenance schemes by plasma equilibrium analysis in Tokamak DEMO reactor H. Utoh, K. Tobita, N. Asakura, Y. Sakamoto https://doi.org/10.1016/j.fusengdes.2014.06.020 Fusion Engineering and Design
2014 JA Relationship between net electric power and radial build of DEMO based on ITER steady-state scenario parameters Y. Sakamoto, M. Nakamura, K. Tobita, H. Utoh, Y. Someya, K. Hoshino, N. Asakura, S. Tokunaga https://doi.org/10.1016/j.fusengdes.2014.04.032 Fusion Engineering and Design
2014 JA Waste management scenario in the hot cell and waste storage for DEMO Y. Someya, K. Tobita, H. Utoh, N. Asakura, K. Hoshino, M. Nakamura, Y. Sakamoto https://doi.org/10.1016/j.fusengdes.2014.04.059 Fusion Engineering and Design
2014 EU Overview of the Structural Materials Program for Fusion Reactors Under EFDA S.M. Gonzalez De Vicente, S. Dudarev, M. Rieth https://doi.org/10.13182/FST13-764 Fusion Science and Technology
2014 EU KIT Contribution to the Gyrotron Development for Nuclear Fusion Experiments in Europe J. Jelonnek, K. Avramidis, J. Franck, G. Dammertz, G. Gantenbein, K. Hesch, S. Illy, J. Jin, A. Malygin, I. Gr. Pagonakis, B. Piosczyk, T. Rzesnicki, A. Samartsev, A. Schlaich, M. Thumm, J. Zhang https://ieeexplore.ieee.org/document/6775167 GeMiC 2014; German Microwave Conference
2014 EU Conceptual design of a toroidal field coil for a fusion power plant using high temperature superconductors P. V. Gade, C. Barth, C. Bayer, W. H. Fietz, F. Franza, R. Heller, K. Hesch, K.-P. Weiss https://doi.org/10.1109/TASC.2014.2299828 IEEE Transactions on Applied Superconductivity
2014 EU Design of large size, force flow superconductors for DEMO TF coils P. Bruzzone, K. Sedlak, B. Stepanov, L. Muzzi, S. Turtu, A. Anemora, J. Harman https://doi.org/10.1109/TASC.2013.2281059 IEEE Transactions on Applied Superconductivity
2014 EU First Operation of a Step-Frequency Tunable 1-MW Gyrotron With a Diamond Brewster Angle Output Window G. Gantenbein, A. Samartsev, G. Aiello, G. Dammertz, J. Jelonnek, M. Losert, A. Schlaich, T.A. Scherer, D. Strauss, M. Thumm, D. Wanger https://doi.org/10.1109/TED.2013.2294739 IEEE Transactions on Electron Devices
2014 EU Recent Advances in the worldwide fusion gyrotron development M. Thumm https://doi.org/10.1109/TPS.2013.2284026 IEEE Transactions on Plasma Science
2014 EU Developing structural, high-heat flux and plasma facing materials for a near-term DEMO fusion power plant: The EU assessment D. Stork, P. Agostini, J.L. Boutard, D. Buckthorpe, E. Diegele, S.L. Dudarev, C. English, G. Federici, M.R. Gilbert, S. Gonzalez, A. Ibarra, Ch. Linsmeier, A. Li Puma, G. Marbach, P.F. Morris, L.W. Packer, B. Raj, M. Rieth, M.Q. Tran, D.J. Ward, S.J. Zinkle https://doi.org/10.1016/j.jnucmat.2014.06.014 Journal of Nuclear Materials
2014 EU&JA Current status and recent research achievements in ferritic/martensitic steels A.-A.F. Tavassolia, E. Diegele, R. Lindau, N. Luzginova, H. Tanigawa https://doi.org/10.1016/j.jnucmat.2014.06.017 Journal of Nuclear Materials
2014 EU DEMO divertor limitations during and in between ELMs R.P. Wenninger, M. Bernert, T. Eich, E. Fable, G. Federici, A. Kallenbach, A. Loarte, C. Lowry, D. McDonald, R. Neu, T. Pütterich, P. Schneider, B. Sieglin, G. Strohmayer, F. Reimold and M. Wischmeier https://doi.org/10.1088/0029-5515/54/11/114003 Nuclear Fusion
2014 EU Laser measurement of the photodetachment cross-section of Hat the wavelength 1064nm M. Vandevraye, Ph. Babilotte, C. Drag & C. Blondel https://doi.org/10.1103/PhysRevA.90.013411 Physical Review A
2014 EU&JA Key aspects of the safety study of a water-cooled fusion DEMO reactor M. Nakamura, K. Tobita, Y. Someya, H. Tanigawa, W. Gulden, Y. Sakamoto, T. Araki, K. Watanabe, H. Matsuyama, K. Ishii, H. Utoh, H. Takase, T. Hayashi, A. Satou, T. Yonomoto, G. Federici, K. Okano https://doi.org/10.1585/pfr.9.1405139 Plasma and Fusion Research
2014 JA Divertor study on Demo reactor K. Hoshino, N. Asakura, K. Shimizu, S. Tokunaga, T. Takizuka, Y. Someya, M. Nakamura, H. Utoh, Y. Sakamoto, K. Tobita https://doi.org/10.1585/pfr.9.3403070 Plasma and Fusion Research
2013 EU Assessment of DEMO challenges in technology and physics H. Zohm https://doi.org/10.1016/j.fusengdes.2013.01.001 Fusion Engineering and Design
2013 EU Potential and limits of water cooled divertor concepts based on monoblock design as possible candidates for a DEMO reactor A. Li-Puma, M. Richou, P. Magaud, M. Missirlian, E. Visca, V. Pericoli Ridolfini https://doi.org/10.1016/j.fusengdes.2013.05.114 Fusion Engineering and Design
2013 JA Impact of an ‘inter linked’ central solenoid configuration on the size of tokamak DEMO M. Nakamura, K. Tobita, H. Utoh, Y. Sakamoto https://doi.org/10.1016/j.fusengdes.2013.01.097 Fusion Engineering and Design
2013 JA Investigation of advanced divertor magnetic configuration for DEMO tokamak reactor N. Asakura, K. Shinya, K. Tobita, K. Hoshino, K. Shimizu, H. Utoh, Y. Someya, M. Nakamura, N. Ohno, M. Kobayashi, H. Tanaka https://doi.org/10.13182/FST13-A16876 Fusion Science and Technology
2013 EU On the physics guidelines for a tokamak DEMO H. Zohm, C. Angioni, E. Fable, G. Federici, G. Gantenbein, T. Hartmann, K. Lackner, E. Poli, L. Porte, O. Sauter, G. Tardini, D. Ward and M. Wischmeier https://doi.org/10.1088/0029-5515/53/7/073019 Nuclear Fusion
2013 JA A simulation study of large power handling in the divertor for a Demo reactor N. Asakura, K. Shimizu, K. Hoshino, K. Tobita, S. Tokunaga, T. takizuka https://doi.org/10.1088/0029-5515/53/12/123013 Nuclear Fusion
2013 JA Critical design factors for sector transport maintenance in DEMO H. Utoh, Y. Someya, K. Tobita, N. Asakura, K. Hoshino, M. Nakamura https://doi.org/10.1088/0029-5515/53/12/123005 Nuclear Fusion
2013 JA Use of an ‘Inter-Linked’ Central Solenoid for Plasma Current Ramp-Up in a Tokamak Fusion Reactor M. NAKAMURA, K. TOBITA, H. UTOH https://doi.org/10.1585/pfr.8.1205007 Plasma and Fusion Research
2013 JA Estimation of TBR on the Gap Between Neighboring Blanket Modules in the DEMO Reactor Y. Someya and K. Tobita https://doi.org/10.1088/1009-0630/15/2/19 Plasma Science and Technology
2013 EU Assessment of an ITER-like Water-Cooled Divertor for DEMO E. Visca, F. Crescenzi, A. Moriani, A. Li Puma, M. Richou, S. Roccella https://doi.org/10.1109/SOFE.2013.6635433 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU Assessment of Copper Based Materials for the Water-Cooled Divertor Concept of the Demo European Fusion Reactor L. Commin, S. Antusch, S. Baumgärtner, D. Bolich, B. Dafferner, W. Goldacker, M. Hoffmann, P. Lukits, M. Rieth, H. Zimmermann https://doi.org/10.1109/SOFE.2013.6635275 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU Balance of Plant Challenges for a Near-Term EU Demonstration Power Plant M. Porton, H. Latham, Z. Vizvary, E. Surrey, https://doi.org/10.1109/SOFE.2013.6635331 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU DEMO Heating and Current Drive System Integration with Blanket System G. Grossetti, J. Harman, M. Mittwollen, E. Poli, T. Scherer, P. Späh, D. Strauß, A. Vaccaro https://doi.org/10.1109/SOFE.2013.6635329 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU DEMO Initiation of Remote Maintenance Requirements M. Mittwollen, V. Madzharov, M. Kubaschewski, L. V. Boccaccini, G. Grossetti https://doi.org/10.1109/SOFE.2013.6635472 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU EU DEMO Design and R&D Studies G. Federici, G. Giruzzi, C. Lowry, R. Kemp, D. Ward, R. Wenninger, H. Zohm https://doi.org/10.1109/SOFE.2013.6635288 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU Exhaust Pumping of DT Fusion Devices: Current State-of-the-Art and a Potential Roadmap to a Power Plant Chr. Day, Th. Giegerich https://doi.org/10.1109/SOFE.2013.6635297 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU He-Cooled Divertor: Study on Low-Temperature Design Using Ta Alloy as Thimble Material P. Norajitra, W. Basuki, B. Koncar, L. Spatafora https://doi.org/10.1109/SOFE.2013.6635453 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU Impact of Pulsed Operation on Lifetime of Demo Blanket J. Aktaa, L.V. Boccaccini, C. Bachmann https://doi.org/10.1109/SOFE.2013.6635460 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU The application of systems engineering principles to the European DEMO design and R&D studies J. Harman, G. Federici, R. Kemp https://doi.org/10.1109/SOFE.2013.6635440 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU The Development of a Methodology to Allocate RAMI Requirements to DEMO R.J. Brown, M. Porton https://doi.org/10.1109/SOFE.2013.6635363 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU The THESEUS Facility – A Test Environment for the Torus Exhaust Vacuum Pumping System of a Fusion Power Plant Th. Giegerich, Chr. Day https://doi.org/10.1109/SOFE.2013.6635290 2013 IEEE 25th Symposium on Fusion Engineering
2013 EU Scoping studies for NBI launch geometries on DEMO I. Jenkins, C.D. Challis, D.L. Keeling, E. Surrey https://doi.org/10.1109/SOFE.2013.6635445 2013 IEEE 25th Symposium on Fusion Engineering
2012 JA Simulation study of an extended divertor leg for heat control in the SlimCS DEMO reactor K. Hoshino K. Shimizu N. Asakura T. Takizuka M. Nakamura K. Tobita https://doi.org/10.1002/ctpp.201210048 Contributions to Plasma Physics
2012 EU&JA Efforts towards improvement of systems codes for the Broader Approach DEMO design M. Nakamura, R. Kemp, H. Utoh, D.J. Ward, K. Tobita, R. Hiwatari, G. Federici https://doi.org/10.1016/j.fusengdes.2012.02.034 Fusion Engineering and Design
2012 JA Conceptual study of vertical sector transport maintenance for DEMO fusion reactor H. Utoh, K. Tobita, Y. Someya, H. Takase https://doi.org/10.1016/j.fusengdes.2012.03.024 Fusion Engineering and Design
2012 JA Waste management strategy focused on maintenance, storage and recycling Y. Someya, K. Tobita, H. Utoh, N. Asakura https://doi.org/10.1016/j.fusengdes.2012.02.117 Fusion Engineering and Design
2012 JA Comparative study of cost models for tokamak DEMO fusion reactors T. Oishi, K. Yamazaki, H. Arimoto, K. Ban, T. Kondo, K. Tobita, T. Goto https://doi.org/10.1585/pfr.7.2405115 Plasma and Fusion Research
2012 JA Estimation of decay heat in fusion DEMO reactor Y. Someya and K. Tobita https://doi.org/10.1585/pfr.7.2405066 Plasma and Fusion Research
2012 JA Modification of DOHEAT for optimization of coolant conditions in DEMO blanket H. Utoh, K. Tobita, Y. Someya, M. Nakamura https://doi.org/10.1585/pfr.7.2405109 Plasma and Fusion Research